Epoxy Structural Adhesives

J-B Weld KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 230 Degrees F.

J-B Weld KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 230 Degrees F.

J-B Weld Plastic Bonder Syringe is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

J-B Weld Plastic Bonder Syringe is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

This J-B Weld epoxy adhesive is grey in colour and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive has a working time of 4 to six hours.

This J-B Weld epoxy adhesive is grey in colour and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive has a working time of 4 to six hours.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

J-B Weld ClearWeld Syringe is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

J-B Weld ClearWeld Syringe is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

This clear, eight-ounce ClearWeldPro epoxy adhesive tube is for use on metal, carpet, glass, ceramic, and wood. With a functional cure of five minutes and a full cure of one hour, this adhesive has a mixing ratio of 1:1 and maximum temperature of 250℉.

This clear, eight-ounce ClearWeldPro epoxy adhesive tube is for use on metal, carpet, glass, ceramic, and wood. With a functional cure of five minutes and a full cure of one hour, this adhesive has a mixing ratio of 1:1 and maximum temperature of 250℉.

This grey, 10-ounce KwikWeld cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

This grey, 10-ounce KwikWeld cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

This clear, eight-ounce cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

This clear, eight-ounce cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

J-B Weld PlasticWeld Syringe is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 3900 PSI and cures to a translucent yellow color.

J-B Weld PlasticWeld Syringe is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 3900 PSI and cures to a translucent yellow color.

J-B Weld Extreme Heat High Temperature Resistant Metallic Paste is formulated to allow for repairs to iron, steel and metal in high temperature environments (2400 Degrees F/1300 Degrees C). When cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, gas and commercial furnaces and water heaters. This product is non-flammable an

J-B Weld Extreme Heat High Temperature Resistant Metallic Paste is formulated to allow for repairs to iron, steel and metal in high temperature environments (2400 Degrees F/1300 Degrees C). When cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, gas and commercial furnaces and water heaters. This product is non-flammable an

J-B Weld MarineWeld is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld sets in 4-6 hours and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface. MarineWeld has a tensile strength of 5020 PSI.

J-B Weld MarineWeld is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld sets in 4-6 hours and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface. MarineWeld has a tensile strength of 5020 PSI.

J-B Weld PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life: functional cure occurs in 2-3 hours. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first.

J-B Weld PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life: functional cure occurs in 2-3 hours. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first.

J-B Weld MinuteWeld Syringe is a special formulated, high-strength, two-part instant setting epoxy. MinuteWeld will set under most temperature conditions in one minute. MinuteWeld is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.

J-B Weld MinuteWeld Syringe is a special formulated, high-strength, two-part instant setting epoxy. MinuteWeld will set under most temperature conditions in one minute. MinuteWeld is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.

J-B Weld MarineWeld is a specially formulated two-part adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, SMC fiberglass and others. At room temperature, MarineWeld sets in 5 minutes and will be white at full cure. It may then be tapped, filed, sanded and drilled, retaining full strength above or below the water's surface. MarineWeld ha a 1:1 mixing ratio and tensile strength of 2350 PSI.

J-B Weld MarineWeld is a specially formulated two-part adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, SMC fiberglass and others. At room temperature, MarineWeld sets in 5 minutes and will be white at full cure. It may then be tapped, filed, sanded and drilled, retaining full strength above or below the water's surface. MarineWeld ha a 1:1 mixing ratio and tensile strength of 2350 PSI.

This ClearWeld epoxy adhesive is clear and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive features cures with a clear, multi-purpose, quick setting, strong and lasting bond on most surfaces, transparent bond when used at thicknesses of less than 15 mil and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 3900 psi.

This ClearWeld epoxy adhesive is clear and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive features cures with a clear, multi-purpose, quick setting, strong and lasting bond on most surfaces, transparent bond when used at thicknesses of less than 15 mil and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 3900 psi.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.