Epoxy Structural Adhesives

This amber, 200-millilitre dual-cartridge E-120HP Hysol epoxy adhesive is a non-sag aerospace-grade epoxy with an extended open time to allow for adjustment. With a two-hour functional cure and 24-hour full cure, this adhesive has a mixing ratio of 2:1, and a shear strength of 4300 PSI.

This amber, 200-millilitre dual-cartridge E-120HP Hysol epoxy adhesive is a non-sag aerospace-grade epoxy with an extended open time to allow for adjustment. With a two-hour functional cure and 24-hour full cure, this adhesive has a mixing ratio of 2:1, and a shear strength of 4300 PSI.

This HY 4080 acrylic adhesive is grey. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

This HY 4080 acrylic adhesive is grey. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

This dual-cartridge PC7255 epoxy adhesive is for use on metal, has a shear strength of PSI 4500, and is available in a 900-millilitre tube. With a three-hour functional cure and four-hour full cure, this adhesive has grey epoxy, a maximum temperature of 230℉, 2.7 square foot coverage, and a mixing ratio of 2:1.

This dual-cartridge PC7255 epoxy adhesive is for use on metal, has a shear strength of PSI 4500, and is available in a 900-millilitre tube. With a three-hour functional cure and four-hour full cure, this adhesive has grey epoxy, a maximum temperature of 230℉, 2.7 square foot coverage, and a mixing ratio of 2:1.

This PC 7255 epoxy adhesive is green and comes in a dual-cartridge. It meets the standards for ISO 604. This epoxy adhesive features corrosion resistant, easy to use, low friction, sprayable and includes resin and hardener. In addition, it is for use with chutes, heat exchanges and condensers, lining tanks, pipes, resurfacing and repairing rudders and pintel housings, it has a working time of 4 hour and has a tensile strength of 6815 psi.

This PC 7255 epoxy adhesive is green and comes in a dual-cartridge. It meets the standards for ISO 604. This epoxy adhesive features corrosion resistant, easy to use, low friction, sprayable and includes resin and hardener. In addition, it is for use with chutes, heat exchanges and condensers, lining tanks, pipes, resurfacing and repairing rudders and pintel housings, it has a working time of 4 hour and has a tensile strength of 6815 psi.

Made with methacrylate ester, this two-part epoxy has a cure time of 720 seconds. The epoxy comes in a 490-millilitre, dual cartridge design and dries green.

Made with methacrylate ester, this two-part epoxy has a cure time of 720 seconds. The epoxy comes in a 490-millilitre, dual cartridge design and dries green.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

This EA 11C epoxy adhesive is black and comes in a tube. It meets the standards for ASTM E1530, ISO 11359-2, ISO 868. This epoxy adhesive features high service temperature, low outgassing properties, machinable, room temperature or heat cure, sandable, withstands severe environments and includes resin and hardener. In addition, it is for use with manufacturer's number98472, 97042, it has a working time of 20 minutes.

This EA 11C epoxy adhesive is black and comes in a tube. It meets the standards for ASTM E1530, ISO 11359-2, ISO 868. This epoxy adhesive features high service temperature, low outgassing properties, machinable, room temperature or heat cure, sandable, withstands severe environments and includes resin and hardener. In addition, it is for use with manufacturer's number98472, 97042, it has a working time of 20 minutes.

This EA 1C epoxy adhesive is white and comes in a can. It meets the standards for RoHS. This epoxy adhesive features high service temperature, low outgassing properties, machinable and sandable, withstands extreme environments and includes resin and hardener.

This EA 1C epoxy adhesive is white and comes in a can. It meets the standards for RoHS. This epoxy adhesive features high service temperature, low outgassing properties, machinable and sandable, withstands extreme environments and includes resin and hardener.

This HY 4090 GY epoxy adhesive is grey and comes in a dual-cartridge. It meets the standards for ISO 10993, ISO 11359-2, ISO 4587, ISO 527-3, ISO 868. This epoxy adhesive features temperature and moisture resistant, fast fixture and includes resin and hardener. In addition, it is for use with manufacturer's number lct98472, it has a working time of five minutes and has a tensile strength of 1,025 psi.

This HY 4090 GY epoxy adhesive is grey and comes in a dual-cartridge. It meets the standards for ISO 10993, ISO 11359-2, ISO 4587, ISO 527-3, ISO 868. This epoxy adhesive features temperature and moisture resistant, fast fixture and includes resin and hardener. In addition, it is for use with manufacturer's number lct98472, it has a working time of five minutes and has a tensile strength of 1,025 psi.

This 9340 epoxy adhesive is grey and comes in a tube. It meets the standards for ASTM D1002. This epoxy adhesive features easy to mix, heat resistant, high shear strength, high tensile strength, resistant to automotive fluids, sandable and includes resin and hardener. In addition, it is for use with manufacturer's number98472, 97042, it has a working time of 40 minutes. It is not water-resistant.

This 9340 epoxy adhesive is grey and comes in a tube. It meets the standards for ASTM D1002. This epoxy adhesive features easy to mix, heat resistant, high shear strength, high tensile strength, resistant to automotive fluids, sandable and includes resin and hardener. In addition, it is for use with manufacturer's number98472, 97042, it has a working time of 40 minutes. It is not water-resistant.

This HY 4080 acrylic adhesive is grey and comes in a cartridge. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

This HY 4080 acrylic adhesive is grey and comes in a cartridge. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

This EA 9131 epoxy adhesive is blue and meets the standards for RoHS. This epoxy adhesive features bonds most materials, can be used to build-up worn surfaces, effective at filling porosities and voids, room temperature cure. In addition, it is not water-resistant.

This EA 9131 epoxy adhesive is blue and meets the standards for RoHS. This epoxy adhesive features bonds most materials, can be used to build-up worn surfaces, effective at filling porosities and voids, room temperature cure. In addition, it is not water-resistant.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.