Epoxy Coatings

Roll, spray, or brush on this flat, grey, alkyd solvent primer to revive rusty, metal surfaces. One 3.78-litre can will cover 66 to 110 square feet. This paint should be applied in 32 to 90 degrees Fahrenheit and is for mild to moderate exposure conditions. It has a dry time of eight to 12 hours, and a recoat dry time of 24 hours, curing completely in 24 hours.

Roll, spray, or brush on this flat, grey, alkyd solvent primer to revive rusty, metal surfaces. One 3.78-litre can will cover 66 to 110 square feet. This paint should be applied in 32 to 90 degrees Fahrenheit and is for mild to moderate exposure conditions. It has a dry time of eight to 12 hours, and a recoat dry time of 24 hours, curing completely in 24 hours.

This yellow rust paint is for use on metal surfaces. It has a gloss finish and is meant for areas where exposure conditions are mild to moderate. The 946-millilitre can will cover 66 to 110 square feet. Use a brush, roll, or spray for application, and for best results, apply within a temperature range of 32 to 90 degrees Fahrenheit. This paint has a solvent base. It will dry in eight to 12 hours and has a recoat dry-time of 24 hours. It is an alkyd resin.

This yellow rust paint is for use on metal surfaces. It has a gloss finish and is meant for areas where exposure conditions are mild to moderate. The 946-millilitre can will cover 66 to 110 square feet. Use a brush, roll, or spray for application, and for best results, apply within a temperature range of 32 to 90 degrees Fahrenheit. This paint has a solvent base. It will dry in eight to 12 hours and has a recoat dry-time of 24 hours. It is an alkyd resin.

This is a gloss acrylic enamel paint for use both indoors and outdoors on metal surfaces. It is a one-gallon can, with a net weight of nine litres. This paint is a masstone base in colour. One can will cover 150 to 270 square feet, and it can be applied down to 40 degrees Fahrenheit. This is a fast cure paint with a dry time of 15 minutes, a recoat dry time of two hours, and a seven-day cure time. This paint can be applied by brush, roll, or spray.

This is a gloss acrylic enamel paint for use both indoors and outdoors on metal surfaces. It is a one-gallon can, with a net weight of nine litres. This paint is a masstone base in colour. One can will cover 150 to 270 square feet, and it can be applied down to 40 degrees Fahrenheit. This is a fast cure paint with a dry time of 15 minutes, a recoat dry time of two hours, and a seven-day cure time. This paint can be applied by brush, roll, or spray.

Apply this paint using a brush, roll, or spray in temperatures as low as 40 degrees Fahrenheit. It is a gloss-finish, acrylic, enamel paint for metal surfaces, with a light tint base colour, and provides 150 to 270 square feet of coverage per gallon. The dry time is 15 minutes, the recoat dry time is two hours, and the cure time is seven days. It comes in a five-gallon pail and has a net weight of 45 litres.

Apply this paint using a brush, roll, or spray in temperatures as low as 40 degrees Fahrenheit. It is a gloss-finish, acrylic, enamel paint for metal surfaces, with a light tint base colour, and provides 150 to 270 square feet of coverage per gallon. The dry time is 15 minutes, the recoat dry time is two hours, and the cure time is seven days. It comes in a five-gallon pail and has a net weight of 45 litres.

This light tint base-coloured, acrylic, enamel paint has a gloss finish. It dries in 15 minutes, with a recoat dry time of two hours. This paint will cure completely in seven days. Apply on metal surfaces using a brush, roll, or spray, in temperatures down to 40 Degrees F. This paint will cover 150 to 270 square feet per gallon, and this listing is for a one-gallon pail, with a net weight of 10.293 litres.

This light tint base-coloured, acrylic, enamel paint has a gloss finish. It dries in 15 minutes, with a recoat dry time of two hours. This paint will cure completely in seven days. Apply on metal surfaces using a brush, roll, or spray, in temperatures down to 40 Degrees F. This paint will cover 150 to 270 square feet per gallon, and this listing is for a one-gallon pail, with a net weight of 10.293 litres.

This acrylic, enamel paint has a semi-gloss finish and is a masstone base colour. This listing is for one gallon, which has a net weight of 10 litres and will cover 150 to 270 square feet. Apply to interior and exterior metal surfaces using a brush, roll, or spray, in temperatures as low as 40 degrees Fahrenheit. This paint will dry in 15 minutes, with a recoat dry time of two hours, and a cure time of seven days.

This acrylic, enamel paint has a semi-gloss finish and is a masstone base colour. This listing is for one gallon, which has a net weight of 10 litres and will cover 150 to 270 square feet. Apply to interior and exterior metal surfaces using a brush, roll, or spray, in temperatures as low as 40 degrees Fahrenheit. This paint will dry in 15 minutes, with a recoat dry time of two hours, and a cure time of seven days.

This is leather-brown rust paint for metal surfaces. It can be applied with a brush, roll, or spray. This paint has a gloss finish and a solvent base. Use in areas with mild to moderate exposure conditions, and apply within a temperature range of 32 to 90 degrees Fahrenheit. One 946-millilitre can will cover 66 to 110 square feet. It takes eight to 12 hours to dry, and if a recoat is needed, it will take 24 hours to dry. This paint dries completely in 24 hours.

This is leather-brown rust paint for metal surfaces. It can be applied with a brush, roll, or spray. This paint has a gloss finish and a solvent base. Use in areas with mild to moderate exposure conditions, and apply within a temperature range of 32 to 90 degrees Fahrenheit. One 946-millilitre can will cover 66 to 110 square feet. It takes eight to 12 hours to dry, and if a recoat is needed, it will take 24 hours to dry. This paint dries completely in 24 hours.

This is a flat, white primer with a solvent base and an alkyd resin. This primer is for interior and exterior use and should be applied in temperatures between 40 and 90 degrees Fahrenheit. This primer comes in a 3.7-litre container and will cover 400 square feet. Apply using a brush, a roll, or a spray method. Dry time for this paint is 35 minutes, and recoat dry time is two hours. Depending on conditions, this primer will cure completely in four to seven days.

This is a flat, white primer with a solvent base and an alkyd resin. This primer is for interior and exterior use and should be applied in temperatures between 40 and 90 degrees Fahrenheit. This primer comes in a 3.7-litre container and will cover 400 square feet. Apply using a brush, a roll, or a spray method. Dry time for this paint is 35 minutes, and recoat dry time is two hours. Depending on conditions, this primer will cure completely in four to seven days.

This deep base colour, urethane-modified acrylic enamel paint, is for interior and exterior use on galvanized steel, aluminum and other metals. One gallon will cover 180 to 545 square feet. This water-based paint has a high-gloss finish. Apply within a temperature range of 50 to 100 degrees Fahrenheit, using a spray, roll, or brush. It will dry in one hour, with a recoat dry time of one hour and a seven-day cure time.

This deep base colour, urethane-modified acrylic enamel paint, is for interior and exterior use on galvanized steel, aluminum and other metals. One gallon will cover 180 to 545 square feet. This water-based paint has a high-gloss finish. Apply within a temperature range of 50 to 100 degrees Fahrenheit, using a spray, roll, or brush. It will dry in one hour, with a recoat dry time of one hour and a seven-day cure time.

This is a rust paint for metal surfaces, with a solvent base and an alkyd resin. It has a flat, white finish. The dry time is eight to 12 hours, and a recoat will take 24 hours to dry. The dry time is 24 hours. This paint comes in 946-millilitre cans and will cover 66 to 110 square feet. Apply in 32 to 90 degrees Fahrenheit, using a brush, roll, or spray method. This paint is meant for mild to moderate exposure conditions.

This is a rust paint for metal surfaces, with a solvent base and an alkyd resin. It has a flat, white finish. The dry time is eight to 12 hours, and a recoat will take 24 hours to dry. The dry time is 24 hours. This paint comes in 946-millilitre cans and will cover 66 to 110 square feet. Apply in 32 to 90 degrees Fahrenheit, using a brush, roll, or spray method. This paint is meant for mild to moderate exposure conditions.