Corded angle grinders rotate grinding wheels to remove surface material or rotate cut-off wheels to cut through material. Their head is set at a right angle to the tool body, making them more compact than vertical grinders and allowing for better visibility of the wheel and the work surface. Grinders with side handles allow a two-handed grip to improve stability and control. Angle grinders are commonly used to grind welds, prepare metal and concrete surfaces, bevel cutting tools and material edges, cut metal plates and pipe, and polish concrete, stone, and metal. These tools plug into an outlet to allow longer run times than cordless tools, so they are well suited for repetitive tasks and applications where portability isn't a concern. They maintain full power during operation and don't have batteries that require recharging.
This corded heavy-duty angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.2 horsepower motor, a no-load speed of 6600 RPM, and a ⅝"-11 thread spindle. The standard angle grinder has two conductors, a wheel of nine-inch diameter, eight-foot cord, and a rat tail grip. It includes a spanner wrench and a Type-27 guard.
This corded heavy-duty angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.2 horsepower motor, a no-load speed of 6600 RPM, and a ⅝"-11 thread spindle. The standard angle grinder has two conductors, a wheel of nine-inch diameter, eight-foot cord, and a rat tail grip. It includes a spanner wrench and a Type-27 guard.
This five-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, an e-clutch, and a type 27 wheel.
This five-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, an e-clutch, and a type 27 wheel.
This corded angle grinder has a slide switch and operates at 120V/7A. It has a maximum speed of 12000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a spanner wrench and a type 27 guard.
This corded angle grinder has a slide switch and operates at 120V/7A. It has a maximum speed of 12000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a spanner wrench and a type 27 guard.
This corded angle grinder has a trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes a flange and spanner wrench.
This corded angle grinder has a trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes a flange and spanner wrench.
This four-piece corded angle grinder, operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of six-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel.
This four-piece corded angle grinder, operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of six-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel.
This corded heavy-duty small angle grinder with no lock-on has a paddle switch and operates at 120V/13A. It has a no-load speed of 11000 RPM and a ⅝"-11 thread spindle. The standard angle grinder has two conductors, a wheel of five-inch diameter, eight-foot cord, and a barrel grip. It includes a Type-27 guard, side handle, spanner wrench, and flanges.
This corded heavy-duty small angle grinder with no lock-on has a paddle switch and operates at 120V/13A. It has a no-load speed of 11000 RPM and a ⅝"-11 thread spindle. The standard angle grinder has two conductors, a wheel of five-inch diameter, eight-foot cord, and a barrel grip. It includes a Type-27 guard, side handle, spanner wrench, and flanges.
This six-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, an e-clutch, and a type 27 wheel.
This six-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, an e-clutch, and a type 27 wheel.
This corded angle grinder has a trigger switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes flanges and a side handle.
This corded angle grinder has a trigger switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes flanges and a side handle.
This five-piece corded angle grinder has a paddle lock-on switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of six-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel.
This five-piece corded angle grinder has a paddle lock-on switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of six-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel.
This corded angle grinder has a paddle switch and operates at 110V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has three conductors and a wheel of five-inch diameter. It has a standard head and a type 27 wheel. The grinder includes a Fixtec nut, guard, flange, wrench, and side handle.
This corded angle grinder has a paddle switch and operates at 110V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has three conductors and a wheel of five-inch diameter. It has a standard head and a type 27 wheel. The grinder includes a Fixtec nut, guard, flange, wrench, and side handle.
This corded angle grinder has a lock-on slide switch and operates at 120V/13A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a slide and flange.
This corded angle grinder has a lock-on slide switch and operates at 120V/13A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a slide and flange.
This corded angle grinder has a trigger lock-on switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, rat tail grip, and type 27 wheel. The grinder includes flange and spanner wrench.
This corded angle grinder has a trigger lock-on switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, rat tail grip, and type 27 wheel. The grinder includes flange and spanner wrench.
This seven-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel.
This seven-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel.
This five-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel.
This five-piece corded angle grinder has a paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel.
This corded angle grinder has a lock-on slide switch and operates at 120V/13A. It has a speed ranging from 2800 to 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a slide and flange.
This corded angle grinder has a lock-on slide switch and operates at 120V/13A. It has a speed ranging from 2800 to 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a slide and flange.
This corded angle grinder has a slide lock-on switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a spanner wrench and flanges.
This corded angle grinder has a slide lock-on switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a spanner wrench and flanges.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
