Product ITEM is unavailable. See products from the same category below.
Corded Angle Grinders
Corded angle grinders rotate grinding wheels to remove surface material or rotate cut-off wheels to cut through material. Their head is set at a right angle to the tool body, making them more compact than vertical grinders and allowing for better visibility of the wheel and the work surface. Grinders with side handles allow a two-handed grip to improve stability and control. Angle grinders are commonly used to grind welds, prepare metal and concrete surfaces, bevel cutting tools and material edges, cut metal plates and pipe, and polish concrete, stone, and metal. These tools plug into an outlet to allow longer run times than cordless tools, so they are well suited for repetitive tasks and applications where portability isn't a concern. They maintain full power during operation and don't have batteries that require recharging.
This corded angle grinder with no lock-on has a bottom trigger switch and operates at 120V/15A. It has a 4.9 horsepower motor, a maximum speed of 8500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of seven-inch diameter, a six-foot cord, and a rat tail grip. It includes a three-position anti-vibe side handle.
This corded angle grinder with no lock-on has a bottom trigger switch and operates at 120V/15A. It has a 4.9 horsepower motor, a maximum speed of 8500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of seven-inch diameter, a six-foot cord, and a rat tail grip. It includes a three-position anti-vibe side handle.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.9 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of seven-inch diameter, a six-foot cord, and a rat tail grip.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.9 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of seven-inch diameter, a six-foot cord, and a rat tail grip.
This DWE series corded small angle grinder kit with a bottom paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of 4½-inch diameter, a 6.3-foot cord, and a barrel grip. It includes a One-Touch guard and two-position side handle.
This DWE series corded small angle grinder kit with a bottom paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of 4½-inch diameter, a 6.3-foot cord, and a barrel grip. It includes a One-Touch guard and two-position side handle.
This DWE series corded angle grinder has a side slide switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a four-foot cord, and a barrel grip. It includes a guard, grinding wheel, and wrench.
This DWE series corded angle grinder has a side slide switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a four-foot cord, and a barrel grip. It includes a guard, grinding wheel, and wrench.
This corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 5.3 horsepower motor, a maximum speed of 6000 RPM, and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a 10-foot cord, a rat tail grip, and a wheel of seven-inch and nine-inch diameter. It includes keyless adjustable guards.
This corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 5.3 horsepower motor, a maximum speed of 6000 RPM, and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a 10-foot cord, a rat tail grip, and a wheel of seven-inch and nine-inch diameter. It includes keyless adjustable guards.
This DWE series corded high-performance angle grinder with no lock-on has a bottom paddle switch and operates at 120V/13A. It has a maximum speed of 10500 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of five-inch diameter, a six-foot cord, and an electronic anti-kickback brake.
This DWE series corded high-performance angle grinder with no lock-on has a bottom paddle switch and operates at 120V/13A. It has a maximum speed of 10500 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of five-inch diameter, a six-foot cord, and an electronic anti-kickback brake.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.7 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip. It includes nine-inch guard and rubber case cover.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.7 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip. It includes nine-inch guard and rubber case cover.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip. It includes a nine-inch guard and two-position side handle.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip. It includes a nine-inch guard and two-position side handle.
This corded angle grinder with no lock-on has a bottom trigger switch and operates at 120V/15A. It has a 4.7 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip.
This corded angle grinder with no lock-on has a bottom trigger switch and operates at 120V/15A. It has a 4.7 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip.
This DWE series corded high-performance angle grinder with no lock-on has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a six-foot cord, and a rat tail grip. It includes a grinding wheel and wrench.
This DWE series corded high-performance angle grinder with no lock-on has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a six-foot cord, and a rat tail grip. It includes a grinding wheel and wrench.
This DWE series corded high-performance angle grinder with no lock-on has a bottom paddle switch and operates at 120V/13A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a four-foot cord, a barrel grip, and a wheel of 4½ and five-inch diameter.
This DWE series corded high-performance angle grinder with no lock-on has a bottom paddle switch and operates at 120V/13A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a four-foot cord, a barrel grip, and a wheel of 4½ and five-inch diameter.
This corded brushless small angle grinder has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 8000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has a wheel of seven-inch diameter, a six-foot cord, an electronic anti-kickback brake, and a rat tail grip. It includes a side handle and inner/outer disc flange.
This corded brushless small angle grinder has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 8000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has a wheel of seven-inch diameter, a six-foot cord, an electronic anti-kickback brake, and a rat tail grip. It includes a side handle and inner/outer disc flange.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
