Product ITEM is unavailable. See products from the same category below.
General Purpose Long-Nose Pliers & Sets
General purpose long-nose pliers pull, twist, bend, and loop wire and other thin materials in applications where insulated or non-sparking pliers aren't required. They also grip small objects, pry staples, retrieve items from slots, and may have a cutter at the base of the jaws to trim wire. Also known as snipe nose pliers, their slim nose keeps workpieces visible for fine manipulation and accesses spaces where larger pliers can't fit.
Elastic tips: stable even when twisted. Resilient precision tips snap back into place even after being twisted. Half-round, long, pointed jaws. Additionally hardened cutting edges (61 HRC) for soft, medium hard and hard wire. Vanadium electric steel: forged and oil hardened
Elastic tips: stable even when twisted. Resilient precision tips snap back into place even after being twisted. Half-round, long, pointed jaws. Additionally hardened cutting edges (61 HRC) for soft, medium hard and hard wire. Vanadium electric steel: forged and oil hardened
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
This needle-nose pliers has a length of 6 inch, plus it weighs 116 g and is not insulated. The handle is red and has a dipped style/type. It features anti twist jaws, gripping area pulling groove, oil hardened, special convex contour and meets the standards for ISO 5746. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This needle-nose pliers is designed for: gripping, wire cutter.
This needle-nose pliers has a length of 6 inch, plus it weighs 116 g and is not insulated. The handle is red and has a dipped style/type. It features anti twist jaws, gripping area pulling groove, oil hardened, special convex contour and meets the standards for ISO 5746. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This needle-nose pliers is designed for: gripping, wire cutter.
This flat-nose pliers has a length of 5¾ inch, plus it weighs 0.225 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This flat-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This flat-nose pliers has a length of 5¾ inch, plus it weighs 0.225 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This flat-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This chain-nose pliers has a length of 4½ inch, plus it weighs 0.163 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features ergonomic handle, rust protection. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready with a knurled grip. This chain-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This chain-nose pliers has a length of 4½ inch, plus it weighs 0.163 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features ergonomic handle, rust protection. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready with a knurled grip. This chain-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This round-nose pliers has a length of 4½ inch, plus it weighs 0.128 pounds and is not insulated. The handle is red and has a dipped style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready with a plastic grip. This round-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This round-nose pliers has a length of 4½ inch, plus it weighs 0.128 pounds and is not insulated. The handle is red and has a dipped style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready with a plastic grip. This round-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This round-nose pliers has a length of 4½ inch, plus it weighs 0.159 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This round-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This round-nose pliers has a length of 4½ inch, plus it weighs 0.159 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This round-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This bent long-nose pliers has a length of 5¾ inch, plus it weighs 0.225 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This bent long-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This bent long-nose pliers has a length of 5¾ inch, plus it weighs 0.225 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features effective rust protection, low-friction double spring for gentle and even opening. In addition, it has a polished finish, plus it is not non-sparking, and is not tether ready. This bent long-nose pliers is designed for: bending, gripping, holding, ultra fine assembly work in electronics and fine mechanics.
This flat-nose pliers has a length of 6¼ inch, plus it weighs 0.317 pounds and is not insulated. The handle is red and has a dipped style/type. It features forged, oil-hardened, short and wide jaws and meets the standards for DIN ISO 5743. In addition, it has a black atramentized finish, plus it is not non-sparking, and is not tether ready with a plastic knurled grip. This flat-nose pliers is designed for: gripping, holding flat objects, turning wires, wire bending.
This flat-nose pliers has a length of 6¼ inch, plus it weighs 0.317 pounds and is not insulated. The handle is red and has a dipped style/type. It features forged, oil-hardened, short and wide jaws and meets the standards for DIN ISO 5743. In addition, it has a black atramentized finish, plus it is not non-sparking, and is not tether ready with a plastic knurled grip. This flat-nose pliers is designed for: gripping, holding flat objects, turning wires, wire bending.
This long-nose pliers has a length of 6¼ inches and is not insulated. The handle is red and has a dipped style/type. It features half-round jaws, pointed and meets the standards for DIN ISO 5745. In addition, it is not non-sparking, and is not tether ready. This long-nose pliers is designed for: wire cutter, wire stripper.
This long-nose pliers has a length of 6¼ inches and is not insulated. The handle is red and has a dipped style/type. It features half-round jaws, pointed and meets the standards for DIN ISO 5745. In addition, it is not non-sparking, and is not tether ready. This long-nose pliers is designed for: wire cutter, wire stripper.
This long-nose pliers has a length of 8 inch, plus it weighs 198 g and is not insulated. The handle is multicoloured with an ergonomic style/type. It features distortion-tolerant, elastic precision tips, ergonomic handle, half-round jaws and meets the standards for DIN ISO 5745. In addition, it has a chrome-plated finish, plus it is not non-sparking, and is not tether ready. This long-nose pliers is designed for: electrical, motor and plumbing professions, wire cutter, wire stripper.
This long-nose pliers has a length of 8 inch, plus it weighs 198 g and is not insulated. The handle is multicoloured with an ergonomic style/type. It features distortion-tolerant, elastic precision tips, ergonomic handle, half-round jaws and meets the standards for DIN ISO 5745. In addition, it has a chrome-plated finish, plus it is not non-sparking, and is not tether ready. This long-nose pliers is designed for: electrical, motor and plumbing professions, wire cutter, wire stripper.
This long-nose plier set has a length of 8 inches and is not insulated. The handle is red and has a standard style/type. It features provide durability and meets the standards for ATSM. In addition, it is not non-sparking, and is not tether ready. This long-nose plier set includes 7 inch bent long-nose, 8 inch dolphin long-nose, 8 inch hose grip pliers.
This long-nose plier set has a length of 8 inches and is not insulated. The handle is red and has a standard style/type. It features provide durability and meets the standards for ATSM. In addition, it is not non-sparking, and is not tether ready. This long-nose plier set includes 7 inch bent long-nose, 8 inch dolphin long-nose, 8 inch hose grip pliers.
This duckbill pliers has a length of 6¼ inch, plus it weighs 0.227 pounds and is not insulated. The handle is red and has a dipped style/type. It features forged, oil-hardened. In addition, it has a chrome-plated finish, plus it is not non-sparking, and is not tether ready with a plastic grip. This duckbill pliers is designed for: bending, cutting, gripping.
This duckbill pliers has a length of 6¼ inch, plus it weighs 0.227 pounds and is not insulated. The handle is red and has a dipped style/type. It features forged, oil-hardened. In addition, it has a chrome-plated finish, plus it is not non-sparking, and is not tether ready with a plastic grip. This duckbill pliers is designed for: bending, cutting, gripping.
This chain-nose pliers has a length of 5¼ inch, plus it weighs 0.134 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features bolted joint, ergonomic handle, forged, manifold oil-hardened. In addition, it has a burnished finish, plus it is not non-sparking, and is not tether ready with a knurled grip. This chain-nose pliers is designed for: bending, gripping, holding, very precise assembly work in electronics and fine mechanics.
This chain-nose pliers has a length of 5¼ inch, plus it weighs 0.134 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features bolted joint, ergonomic handle, forged, manifold oil-hardened. In addition, it has a burnished finish, plus it is not non-sparking, and is not tether ready with a knurled grip. This chain-nose pliers is designed for: bending, gripping, holding, very precise assembly work in electronics and fine mechanics.
This needle-nose pliers has a length of 5¼ inch, plus it weighs 0.137 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features double spring for a gentle and even opening, ergonomically optimized handle covers, forged, m and more. In addition, it has a burnished finish, plus it is not non-sparking, and is not tether ready. This needle-nose pliers is designed for: bending, gripping, holding, very precise assembly work in electronics and fine mechanics.
This needle-nose pliers has a length of 5¼ inch, plus it weighs 0.137 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It features double spring for a gentle and even opening, ergonomically optimized handle covers, forged, m and more. In addition, it has a burnished finish, plus it is not non-sparking, and is not tether ready. This needle-nose pliers is designed for: bending, gripping, holding, very precise assembly work in electronics and fine mechanics.
This long-nose pliers has a length of 6¼ inches and is not insulated. The handle is multicoloured with an ergonomic style/type. It meets the standards for DIN ISO 5743. In addition, it is not non-sparking, and is not tether ready.
This long-nose pliers has a length of 6¼ inches and is not insulated. The handle is multicoloured with an ergonomic style/type. It meets the standards for DIN ISO 5743. In addition, it is not non-sparking, and is not tether ready.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
