Product ITEM is unavailable. See products from the same category below.
Corded Angle Grinders
Corded angle grinders rotate grinding wheels to remove surface material or rotate cut-off wheels to cut through material. Their head is set at a right angle to the tool body, making them more compact than vertical grinders and allowing for better visibility of the wheel and the work surface. Grinders with side handles allow a two-handed grip to improve stability and control. Angle grinders are commonly used to grind welds, prepare metal and concrete surfaces, bevel cutting tools and material edges, cut metal plates and pipe, and polish concrete, stone, and metal. These tools plug into an outlet to allow longer run times than cordless tools, so they are well suited for repetitive tasks and applications where portability isn't a concern. They maintain full power during operation and don't have batteries that require recharging.
This corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a depressed center wheel, lock nut wrench, toolless wheel cover, inner flange, side handle, and plastic carrying case.
This corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a depressed center wheel, lock nut wrench, toolless wheel cover, inner flange, side handle, and plastic carrying case.
This SJS series medium-duty corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has a wheel of five-inch diameter and a rat tail grip. It includes a depressed center wheel, lock nut wrench, and dust cover attachment.
This SJS series medium-duty corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has a wheel of five-inch diameter and a rat tail grip. It includes a depressed center wheel, lock nut wrench, and dust cover attachment.
This corded angle grinder has a paddle switch and operates at 120V/6A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of 4½-inch diameter and an eight-foot cord. It includes a 4½-inch depressed center wheel, inner flange, lock nut wrench, plastic carrying case, side handle, and wheel cover.
This corded angle grinder has a paddle switch and operates at 120V/6A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of 4½-inch diameter and an eight-foot cord. It includes a 4½-inch depressed center wheel, inner flange, lock nut wrench, plastic carrying case, side handle, and wheel cover.
This corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and a vibration level of 2.5 metre per second square. It includes a depressed center wheel, lock nut wrench, wheel cover, inner flange, and plastic carrying case.
This corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and a vibration level of 2.5 metre per second square. It includes a depressed center wheel, lock nut wrench, wheel cover, inner flange, and plastic carrying case.
This corded angle grinder has a body grip/slide switch and operates at 120V/6A. It has a no-load speed of 11000 RPM and an M10 x 1.25 thread spindle. The angle grinder has a wheel of four-inch diameter, two conductors, and a cord of 8.2 feet. It includes a grinding wheel, wheel guard, side handle, inner flange, lock nut, wrench, and tool case.
This corded angle grinder has a body grip/slide switch and operates at 120V/6A. It has a no-load speed of 11000 RPM and an M10 x 1.25 thread spindle. The angle grinder has a wheel of four-inch diameter, two conductors, and a cord of 8.2 feet. It includes a grinding wheel, wheel guard, side handle, inner flange, lock nut, wrench, and tool case.
This SJS series medium-duty corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip. It includes an inner flange, side handle, and dust cover attachment.
This SJS series medium-duty corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip. It includes an inner flange, side handle, and dust cover attachment.
This SJS series corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a side handle, lock nut wrench, wheel cover, six-inch depressed centre wheel, inner flange, and dust cover attachment.
This SJS series corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a side handle, lock nut wrench, wheel cover, six-inch depressed centre wheel, inner flange, and dust cover attachment.
This corded angle grinder has a two stage trigger switch and operates at 120V/10A. It has a no-load speed of 12000 RPM and a ?"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 6.5 metre per second square. It includes a five-inch depressed centre wheel, wheel cover, side handle, and lock nut wrench.
This corded angle grinder has a two stage trigger switch and operates at 120V/10A. It has a no-load speed of 12000 RPM and a ?"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 6.5 metre per second square. It includes a five-inch depressed centre wheel, wheel cover, side handle, and lock nut wrench.
This corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and includes a depressed center wheel, lock nut wrench, toolless wheel cover, inner flange, and side handle.
This corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and includes a depressed center wheel, lock nut wrench, toolless wheel cover, inner flange, and side handle.
This SJS series corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and a vibration level of 10 metre per second square. It includes a six-inch depressed centre wheel, inner flange, and dust cover attachment.
This SJS series corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and a vibration level of 10 metre per second square. It includes a six-inch depressed centre wheel, inner flange, and dust cover attachment.
This corded angle grinder has a thumb switch and operates at 120V/6A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 8.5 metre per second square. It includes a depressed center wheel, inner flange, wheel cover, side handle, and plastic carrying case.
This corded angle grinder has a thumb switch and operates at 120V/6A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 8.5 metre per second square. It includes a depressed center wheel, inner flange, wheel cover, side handle, and plastic carrying case.
This corded angle grinder has a lock-on paddle switch and operates at 120V/15A. It has a no-load speed of 8400 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of seven-inch diameter and a vibration level of 9.5 metre per second square. It includes a seven-inch depressed center wheel, inner flange, side handle, and wheel cover.
This corded angle grinder has a lock-on paddle switch and operates at 120V/15A. It has a no-load speed of 8400 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of seven-inch diameter and a vibration level of 9.5 metre per second square. It includes a seven-inch depressed center wheel, inner flange, side handle, and wheel cover.
This light-duty corded angle grinder has a lock-on body grip/slide switch and operates at 120V/7.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has two conductors, a wheel of 4½-inch diameter, an 8.2-foot cord, and a barrel grip. It includes an inner flange, wheel cover, and side handle.
This light-duty corded angle grinder has a lock-on body grip/slide switch and operates at 120V/7.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has two conductors, a wheel of 4½-inch diameter, an 8.2-foot cord, and a barrel grip. It includes an inner flange, wheel cover, and side handle.
This SJS series corded angle grinder has a trigger switch and operates at 120V/12.5A. It has a no-load speed of 9000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes an anti-vibration side handle, lock nut wrench, toolless wheel cover, six-inch depressed centre wheel, and inner flange.
This SJS series corded angle grinder has a trigger switch and operates at 120V/12.5A. It has a no-load speed of 9000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes an anti-vibration side handle, lock nut wrench, toolless wheel cover, six-inch depressed centre wheel, and inner flange.
This corded angle grinder has a lock-on trigger switch and operates at 120V/15A. It has a no-load speed of 6600 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of nine-inch diameter and includes a side handle, lock nut wrench, wheel cover, and inner flange. It features labyrinth construction and an ergonomic soft rubber grip.
This corded angle grinder has a lock-on trigger switch and operates at 120V/15A. It has a no-load speed of 6600 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of nine-inch diameter and includes a side handle, lock nut wrench, wheel cover, and inner flange. It features labyrinth construction and an ergonomic soft rubber grip.
This corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and an 8.2-foot cord. It includes a side handle, lock nut wrench, toolless wheel cover, five-inch depressed centre wheel, and inner flange.
This corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and an 8.2-foot cord. It includes a side handle, lock nut wrench, toolless wheel cover, five-inch depressed centre wheel, and inner flange.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
