Tap & Die Sets

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, sizes ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, sizes ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

Tap and Die Set, Fractional/Metric, High Carbon Steel, Plain, Number of Pieces 76, Cutting Sizes 34, Die Tap 5/8 In Hex Solid and 1 In Hex Solid, Size/Range No. 4 to 1/2 In and 3mm to 12mm, NC, NF, NPT, BSP, Metric, Meets ASME/ANSI B94.9-1987. Includes Adjustable/Non-Adjustable T-Handle Tap Wrench, Adjustable and Plain Die Stock, 2-in-1 Tap Wrench, 16 Leaf Metric Thread Pitch Gauge, 18 Leaf Stardard Thread Pitch Gauge and Plastic Case

Tap and Die Set, Fractional/Metric, High Carbon Steel, Plain, Number of Pieces 76, Cutting Sizes 34, Die Tap 5/8 In Hex Solid and 1 In Hex Solid, Size/Range No. 4 to 1/2 In and 3mm to 12mm, NC, NF, NPT, BSP, Metric, Meets ASME/ANSI B94.9-1987. Includes Adjustable/Non-Adjustable T-Handle Tap Wrench, Adjustable and Plain Die Stock, 2-in-1 Tap Wrench, 16 Leaf Metric Thread Pitch Gauge, 18 Leaf Stardard Thread Pitch Gauge and Plastic Case

This tap and die set is made of high speed steel. It has right hand direction.

This tap and die set is made of high speed steel. It has right hand direction.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, sizes ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, sizes ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, screwdriver, a plastic case, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has pipe measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, screwdriver, a plastic case, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has pipe measurements.

This round adjustable, metric tap and die set has 13 pieces suitable for right-handed use. It has die sizes M6x1.0, M7x1.0, M8x1.25, M10x1.5, M12x1.75, and tap sizes M6x1.0, M7x1.0, M8x1.25, M10x1.5, M12x1.75 made from high speed steel and tap wrench number T10 also made from high speed steel. The tap chamfer is plug style and the thread type is metric.

This round adjustable, metric tap and die set has 13 pieces suitable for right-handed use. It has die sizes M6x1.0, M7x1.0, M8x1.25, M10x1.5, M12x1.75, and tap sizes M6x1.0, M7x1.0, M8x1.25, M10x1.5, M12x1.75 made from high speed steel and tap wrench number T10 also made from high speed steel. The tap chamfer is plug style and the thread type is metric.

This tap and die set is made of high speed steel, high speed steel. It includes adjustable/nonadjustable t-handle tap wrench, adjustable and plain die stock, 2-in-1 tap wrench, 18 leaf standard thread gauge, extra plastic case, and meets the standards for ASME/ANSI B94.9-1987. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of high speed steel, high speed steel. It includes adjustable/nonadjustable t-handle tap wrench, adjustable and plain die stock, 2-in-1 tap wrench, 18 leaf standard thread gauge, extra plastic case, and meets the standards for ASME/ANSI B94.9-1987. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of high speed steel. It includes tap, die and collet for each size, a plastic case, M10 x 1.5, M12 x 1.75, M14 x 2, M16 x 2, M6 x 1, M8 x 1.25, M10X1.5, M12X1.75, M14X2, M16X2, M6X1, M8X1.25. It has right hand direction.

This tap and die set is made of high speed steel. It includes tap, die and collet for each size, a plastic case, M10 x 1.5, M12 x 1.75, M14 x 2, M16 x 2, M6 x 1, M8 x 1.25, M10X1.5, M12X1.75, M14X2, M16X2, M6X1, M8X1.25. It has right hand direction.

NC, NF & NPT thread types. 1-1/2 in and 2 in OD adjustable dies (WSW1PZ53), 1-1/2 in and 2 in OD solid dies (WSW1PZ37).6 Machine Screw hand taps from 4-40 to 12-24. 10 UNC Tap and Dies: 1/4 in -20 to 1 in-8. 10 UNF Tap and Dies: 1/4 in-28 to 1 in -14.2 NPT Tap & Dies: 1/8 in -27, 1/4 in-18. 2 straight tap wrenches, T-Handle tap wrench, screw pitch gauge, screwdriver and 1 in, 1-1/2 in and 2 in die stocks.

NC, NF & NPT thread types. 1-1/2 in and 2 in OD adjustable dies (WSW1PZ53), 1-1/2 in and 2 in OD solid dies (WSW1PZ37).6 Machine Screw hand taps from 4-40 to 12-24. 10 UNC Tap and Dies: 1/4 in -20 to 1 in-8. 10 UNF Tap and Dies: 1/4 in-28 to 1 in -14.2 NPT Tap & Dies: 1/8 in -27, 1/4 in-18. 2 straight tap wrenches, T-Handle tap wrench, screw pitch gauge, screwdriver and 1 in, 1-1/2 in and 2 in die stocks.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, thread gauge, screwdriver, a plastic case, ¼ in to ¾ inch, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, 9/16"-12, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, thread gauge, screwdriver, a plastic case, ¼ in to ¾ inch, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, 9/16"-12, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes 2 straight tap wrenches, t-handle tap wrench, die stock, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of high speed steel, high speed steel. It includes 2 straight tap wrenches, t-handle tap wrench, die stock, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ¾ inch, ½"-13, ½"-20, ¼"-20, ¼"-28, ¾"-10, ¾"-16, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, ⅝"-11, ⅝"-18, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ¾ inch, ½"-13, ½"-20, ¼"-20, ¼"-28, ¾"-10, ¾"-16, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, ⅝"-11, ⅝"-18, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, t-handle tap wrench, thread gauge, screwdriver, a plastic case, #4 to ½ inch, #10-24, #10-32, #12-24, #4-40, #6-32, #8-32, ½"-13, ½"-20, ¼"-20, ¼"-28, ⅛"-27, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has pipe measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, t-handle tap wrench, thread gauge, screwdriver, a plastic case, #4 to ½ inch, #10-24, #10-32, #12-24, #4-40, #6-32, #8-32, ½"-13, ½"-20, ¼"-20, ¼"-28, ⅛"-27, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has pipe measurements.