Product ITEM is unavailable. See products from the same category below.
Pipe, Tubing & Conduit Hand Cutters
Hand-powered cutters slice through pipe, tubing, or conduit to cut a length for installation or remove damaged sections when making repairs. They make cleaner cuts than saws, leaving smoother edges that require less deburring. Getting an optimal cut requires matching a cutter to the form (pipe, tubing, or conduit) and type (plastic, metal, clay, etc.) of material being cut. Pipe is measured by its nominal inside diameter and typically has thicker walls than tubing and conduit. Tubing and conduit are sized by their outside diameter and typically have thinner walls than pipe.
This tubing cutter has a width of 92 mm, a height of 202 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: cPVC, pex, polybutylene, polyethylene, PVC.
This tubing cutter has a width of 92 mm, a height of 202 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: cPVC, pex, polybutylene, polyethylene, PVC.
This tubing cutter has a width of 2½ inch, a height of 1½ inch, and a length of 2½ inch, plus it weighs 5 ounce. The PVC handle has an ergonomic design. It features cutter can easily be removed from handle, completes a full revolution, non-slip grip. In addition, it is made of aluminum alloy, aluminum alloy. This tubing cutter is designed for: aluminum, brass, copper and includes two s75015 general purpose cutter wheels.
This tubing cutter has a width of 2½ inch, a height of 1½ inch, and a length of 2½ inch, plus it weighs 5 ounce. The PVC handle has an ergonomic design. It features cutter can easily be removed from handle, completes a full revolution, non-slip grip. In addition, it is made of aluminum alloy, aluminum alloy. This tubing cutter is designed for: aluminum, brass, copper and includes two s75015 general purpose cutter wheels.
This tubing cutter has a width of 2½ inch, a height of 1½ inch, and a length of 2½ inch, plus it weighs 5 ounce. The PVC handle has an ergonomic design. It features cutter can easily be removed from handle, completes a full revolution, non-slip grip. In addition, it is made of aluminum alloy, aluminum alloy. This tubing cutter is designed for: aluminum, brass, copper and includes two s75015 general purpose cutter wheels.
This tubing cutter has a width of 2½ inch, a height of 1½ inch, and a length of 2½ inch, plus it weighs 5 ounce. The PVC handle has an ergonomic design. It features cutter can easily be removed from handle, completes a full revolution, non-slip grip. In addition, it is made of aluminum alloy, aluminum alloy. This tubing cutter is designed for: aluminum, brass, copper and includes two s75015 general purpose cutter wheels.
This tubing cutter has a width of 30 mm, a height of 110 mm, and a length of 9 inch. It features auto reverse design. In addition, it is made of steel, aluminum alloy, and is not tether ready. This tubing cutter is designed for: pex, polyethylene, polypropylene, PVC, pvdf and includes blade.
This tubing cutter has a width of 30 mm, a height of 110 mm, and a length of 9 inch. It features auto reverse design. In addition, it is made of steel, aluminum alloy, and is not tether ready. This tubing cutter is designed for: pex, polyethylene, polypropylene, PVC, pvdf and includes blade.
This pipe cutter has a width of 3½ inch, a height of 1 inch, and a length of 7½ inch. It features manual cutting soft pipes. In addition, it is made of steel, aluminum, and is not tether ready. This pipe cutter is designed for: PVC.
This pipe cutter has a width of 3½ inch, a height of 1 inch, and a length of 7½ inch. It features manual cutting soft pipes. In addition, it is made of steel, aluminum, and is not tether ready. This pipe cutter is designed for: PVC.
This tubing cutter has a width of 2½ inch, a height of 1½ inch, and a length of 5 inch, plus it weighs 8.8 ounce. It features foldaway hardened steel reamer, high precision machining and construction, nickel chrome-plat and more. In addition, it is made of steel, aluminum alloy. This tubing cutter is designed for: aluminum, brass, copper and includes two s75015 general purpose cutter wheels.
This tubing cutter has a width of 2½ inch, a height of 1½ inch, and a length of 5 inch, plus it weighs 8.8 ounce. It features foldaway hardened steel reamer, high precision machining and construction, nickel chrome-plat and more. In addition, it is made of steel, aluminum alloy. This tubing cutter is designed for: aluminum, brass, copper and includes two s75015 general purpose cutter wheels.
This tubing cutter has a width of 6½ inch, a height of 2½ inch, and a length of 16½ inch, plus it weighs 3.88 pounds. The handle has a knob design. It features i-beam construction, thrust bearing slide assemblies. In addition, it is made of steel, aluminum. This tubing cutter is designed for: aluminum, copper and includes spare cutting wheel.
This tubing cutter has a width of 6½ inch, a height of 2½ inch, and a length of 16½ inch, plus it weighs 3.88 pounds. The handle has a knob design. It features i-beam construction, thrust bearing slide assemblies. In addition, it is made of steel, aluminum. This tubing cutter is designed for: aluminum, copper and includes spare cutting wheel.
Cleanly cuts (cellular) foam core ABS and foam core PVC pipe, no deburring required. Makes a complete cut in one single rotation. Easy to use, just snap onto the pipe and rotate. Long handle provides increased leverage for easier rotation. Includes two spare blades.
Cleanly cuts (cellular) foam core ABS and foam core PVC pipe, no deburring required. Makes a complete cut in one single rotation. Easy to use, just snap onto the pipe and rotate. Long handle provides increased leverage for easier rotation. Includes two spare blades.
Tubing and conduit cutters. Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit. Now includes X-CEL knob for quicker cutting. Spare wheel included in knob. Capacity: 1 - 3-1/8 inches. Screw feed with standard wheel.
Tubing and conduit cutters. Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit. Now includes X-CEL knob for quicker cutting. Spare wheel included in knob. Capacity: 1 - 3-1/8 inches. Screw feed with standard wheel.
X-Cel blade for fast single stroke cutting. Durable aluminum construction. Ergonomic grips on bottom handle are spaced at 1/2 inch increments to act as a quick pipe measuring scale. Burrless cutting operation provides a square cut.
X-Cel blade for fast single stroke cutting. Durable aluminum construction. Ergonomic grips on bottom handle are spaced at 1/2 inch increments to act as a quick pipe measuring scale. Burrless cutting operation provides a square cut.
This tubing cutter has a width of 3½ inch, a height of 1 inch, and a length of 2 inch, plus it weighs 0.33 pounds. The handle has a knob design. It features large knurled feed screw knob, lightweight slide and wheel housing, rollers include grooves, strong. In addition, it is made of steel, zinc. This tubing cutter is designed for: aluminum, copper.
This tubing cutter has a width of 3½ inch, a height of 1 inch, and a length of 2 inch, plus it weighs 0.33 pounds. The handle has a knob design. It features large knurled feed screw knob, lightweight slide and wheel housing, rollers include grooves, strong. In addition, it is made of steel, zinc. This tubing cutter is designed for: aluminum, copper.
This pipe cutter has a width of 8 inch, a height of 2.5 inch, and a length of 24 inch, plus it weighs 18 lbs. The steel handle has a t-handle design. It features can be converted to 3-wheel cutter by replacing rollers with cutter wheel. In addition, it is made of steel, steel and is not tether ready. This pipe cutter is designed for: steel, stainless steel, heavy wall steel and includes pipe cutter, cutting wheels.
This pipe cutter has a width of 8 inch, a height of 2.5 inch, and a length of 24 inch, plus it weighs 18 lbs. The steel handle has a t-handle design. It features can be converted to 3-wheel cutter by replacing rollers with cutter wheel. In addition, it is made of steel, steel and is not tether ready. This pipe cutter is designed for: steel, stainless steel, heavy wall steel and includes pipe cutter, cutting wheels.
This tubing cutter has a width of 89.5 mm, a height of 215 mm, and a length of 11½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 89.5 mm, a height of 215 mm, and a length of 11½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a length of 5 inch, plus it weighs 6 ounce. The handle has an ergonomic design. It features cutter can easily be removed from handle, completes a full revolution, non-slip grip. In addition, it is made of steel, aluminum, nylon. This tubing cutter is designed for: aluminum, brass, hard or soft copper, monel, stainless steel, thin-wall steel, titanium and includes ratcheting handle.
This tubing cutter has a length of 5 inch, plus it weighs 6 ounce. The handle has an ergonomic design. It features cutter can easily be removed from handle, completes a full revolution, non-slip grip. In addition, it is made of steel, aluminum, nylon. This tubing cutter is designed for: aluminum, brass, hard or soft copper, monel, stainless steel, thin-wall steel, titanium and includes ratcheting handle.
This tubing cutter has a width of 36 mm, a height of 48.5 mm, and a length of 4 inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 36 mm, a height of 48.5 mm, and a length of 4 inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
