Product ITEM is unavailable. See products from the same category below.
Wire Strippers & Cable Slitters
Wire strippers and cable slitters make precise cuts to remove insulation, jackets, and coatings without damaging wire and cable strands. They expose bare wire and cable to prepare for splicing and connecting to terminals. Electricians and cable installers use these stripping tools to properly strip wire and cable, ensuring reliable connectivity and signal transmission.
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
This cable stripper has a length of 5¼ inch, plus it weighs 95 g and is not insulated. It features self-tightening holding lever, spare blade inside the handle, turnable blade for circular and more and meets the standards for ASTM. In addition, it is made of stainless steel, plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This cable stripper has a length of 5¼ inch, plus it weighs 95 g and is not insulated. It features self-tightening holding lever, spare blade inside the handle, turnable blade for circular and more and meets the standards for ASTM. In addition, it is made of stainless steel, plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This skinning knife has a length of 7½ inch, plus it weighs 0.15 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade plastic coated to avoid short circuit, thumb recess and finger hook at the end and more and meets the standards for IEC 60900 DIN EN 60900, VDE. In addition, it is made of steel and is tether ready. This skinning knife is designed for: cables and includes protective cap.
This skinning knife has a length of 7½ inch, plus it weighs 0.15 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade plastic coated to avoid short circuit, thumb recess and finger hook at the end and more and meets the standards for IEC 60900 DIN EN 60900, VDE. In addition, it is made of steel and is tether ready. This skinning knife is designed for: cables and includes protective cap.
This wire stripper has a length of 6¼ inch, plus it weighs 0.58 pounds and is not insulated. The handle has a standard style/type. It features easy adjustment to the required diameter of solid or stranded wire, knurled screw and lock nut and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: stripping.
This wire stripper has a length of 6¼ inch, plus it weighs 0.58 pounds and is not insulated. The handle has a standard style/type. It features easy adjustment to the required diameter of solid or stranded wire, knurled screw and lock nut and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: stripping.
This skinning knife has a length of 7½ inch, plus it weighs 0.148 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features ergonomic and meets the standards for DIN EN 60900, IEC 60900, VDE. In addition, it is made of steel and is not tether ready. This skinning knife is designed for: cable and includes protective cap, slip guard.
This skinning knife has a length of 7½ inch, plus it weighs 0.148 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features ergonomic and meets the standards for DIN EN 60900, IEC 60900, VDE. In addition, it is made of steel and is not tether ready. This skinning knife is designed for: cable and includes protective cap, slip guard.
This cable stripping knife has a length of 1½ inch, plus it weighs 77 g and is insulated. The plastic handle is red and has a straight style/type. It features ergonomically designed handle shape with comfortable slip guard, slip-proof soft components, and more. In addition, it is made of stainless steel and is not tether ready. This cable stripping knife is designed for: conductor insulation and includes shoe guide at blade tip, plastic protective cap.
This cable stripping knife has a length of 1½ inch, plus it weighs 77 g and is insulated. The plastic handle is red and has a straight style/type. It features ergonomically designed handle shape with comfortable slip guard, slip-proof soft components, and more. In addition, it is made of stainless steel and is not tether ready. This cable stripping knife is designed for: conductor insulation and includes shoe guide at blade tip, plastic protective cap.
This skinning knife has a length of 7½ inch, plus it weighs 0.141 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade is plastic coated and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel and is not tether ready. This skinning knife is designed for: cables and includes hinged blade guard, slip guard.
This skinning knife has a length of 7½ inch, plus it weighs 0.141 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade is plastic coated and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel and is not tether ready. This skinning knife is designed for: cables and includes hinged blade guard, slip guard.
This wire stripper has a length of 7 inch, plus it weighs 151 g and is not insulated. The handle has a angled style/type. It features adapts automatically to various conductor heights, allows long stripping lengths, lightweight and more and meets the standards for ASTM. In addition, it is made of steel, reinforced fibreglass, and is not tether ready with a standard cushion grip. This wire stripper is designed for: electrical.
This wire stripper has a length of 7 inch, plus it weighs 151 g and is not insulated. The handle has a angled style/type. It features adapts automatically to various conductor heights, allows long stripping lengths, lightweight and more and meets the standards for ASTM. In addition, it is made of steel, reinforced fibreglass, and is not tether ready with a standard cushion grip. This wire stripper is designed for: electrical.
This cable stripper has a length of 7½ inch, plus it weighs 449 g and is not insulated. The handle has a standard style/type. It features length stop. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This cable stripper is designed for: solar power industries.
This cable stripper has a length of 7½ inch, plus it weighs 449 g and is not insulated. The handle has a standard style/type. It features length stop. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This cable stripper is designed for: solar power industries.
This cable stripper has a length of 5¼ inch, plus it weighs 120 g and is not insulated. It features change from circular to longitudinal cutting by turning the tool body, replaceable blade, spi and more and meets the standards for ASTM. In addition, it is made of plastic, and is not tether ready with a plain grip. This cable stripper is designed for: dismantling.
This cable stripper has a length of 5¼ inch, plus it weighs 120 g and is not insulated. It features change from circular to longitudinal cutting by turning the tool body, replaceable blade, spi and more and meets the standards for ASTM. In addition, it is made of plastic, and is not tether ready with a plain grip. This cable stripper is designed for: dismantling.
This cable stripper has a length of 5 inch, plus it weighs 75 g and is not insulated. It features double shell, folding back stripping tool. In addition, it is made of plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This cable stripper has a length of 5 inch, plus it weighs 75 g and is not insulated. It features double shell, folding back stripping tool. In addition, it is made of plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
For cutting cables, stripping wire and crimping insulted and non-insulated terminals, connectors and plug type connectors. Threaded holes for cutting copper and brass screws threaded M 7/64, 1/8, 5/32, 13/64. Special Steel: high strength
For cutting cables, stripping wire and crimping insulted and non-insulated terminals, connectors and plug type connectors. Threaded holes for cutting copper and brass screws threaded M 7/64, 1/8, 5/32, 13/64. Special Steel: high strength
This cable stripper has a length of 5 inch, plus it weighs 50 g and is not insulated. It features double shell, folding back stripping tool. In addition, it is made of steel, plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This cable stripper has a length of 5 inch, plus it weighs 50 g and is not insulated. It features double shell, folding back stripping tool. In addition, it is made of steel, plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This cable stripper has a length of 5 inch, plus it weighs 79 g and is not insulated. It features for use in conduit and distribution boxes, double shell, folding back stripping tool, practice and more. In addition, it is made of plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This cable stripper has a length of 5 inch, plus it weighs 79 g and is not insulated. It features for use in conduit and distribution boxes, double shell, folding back stripping tool, practice and more. In addition, it is made of plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
