Product ITEM is unavailable. See products from the same category below.
Pipe, Tubing & Conduit Hand Cutters
Hand-powered cutters slice through pipe, tubing, or conduit to cut a length for installation or remove damaged sections when making repairs. They make cleaner cuts than saws, leaving smoother edges that require less deburring. Getting an optimal cut requires matching a cutter to the form (pipe, tubing, or conduit) and type (plastic, metal, clay, etc.) of material being cut. Pipe is measured by its nominal inside diameter and typically has thicker walls than tubing and conduit. Tubing and conduit are sized by their outside diameter and typically have thinner walls than pipe.
This tubing cutter has a width of 89.5 mm, a height of 214 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 89.5 mm, a height of 214 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 39 mm, a height of 56.5 mm, and a length of 2 inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 39 mm, a height of 56.5 mm, and a length of 2 inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 60 mm, a height of 129 mm, and a length of 5 inch. It features fold-away reamer, grooved rollers for close-to-flare cuts. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 60 mm, a height of 129 mm, and a length of 5 inch. It features fold-away reamer, grooved rollers for close-to-flare cuts. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 66 mm, a height of 154 mm, and a length of 6 inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 66 mm, a height of 154 mm, and a length of 6 inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 76 mm, a height of 178 mm, and a length of 9½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 76 mm, a height of 178 mm, and a length of 9½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 30 mm, a height of 110 mm, and a length of 9 inch. It features auto reverse design. In addition, it is made of steel, aluminum alloy, and is not tether ready. This tubing cutter is designed for: pex, polyethylene, polypropylene, PVC, pvdf and includes blade.
This tubing cutter has a width of 30 mm, a height of 110 mm, and a length of 9 inch. It features auto reverse design. In addition, it is made of steel, aluminum alloy, and is not tether ready. This tubing cutter is designed for: pex, polyethylene, polypropylene, PVC, pvdf and includes blade.
This tubing cutter has a width of 92 mm, a height of 202 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: cPVC, pex, polybutylene, polyethylene, PVC.
This tubing cutter has a width of 92 mm, a height of 202 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: cPVC, pex, polybutylene, polyethylene, PVC.
This tubing cutter has a width of 2½ inch, a height of 1 inch, and a length of 11½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel.
This tubing cutter has a width of 2½ inch, a height of 1 inch, and a length of 11½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel.
This tubing cutter has a width of 56 mm, a height of 183 mm, and a length of 6½ inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, brass, thin walled copper and includes spare cutting wheel for copper.
This tubing cutter has a width of 56 mm, a height of 183 mm, and a length of 6½ inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, brass, thin walled copper and includes spare cutting wheel for copper.
This tubing cutter has a width of 69.5 mm, a height of 180 mm, and a length of 7½ inch. It features ratcheting action. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 69.5 mm, a height of 180 mm, and a length of 7½ inch. It features ratcheting action. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This pipe cutter has a width of 185 mm, a height of 647 mm, and a length of 35½ inch. It features extra long feedscrew shank. In addition, it is made of steel, iron, and is not tether ready. This pipe cutter is designed for: steel.
This pipe cutter has a width of 185 mm, a height of 647 mm, and a length of 35½ inch. It features extra long feedscrew shank. In addition, it is made of steel, iron, and is not tether ready. This pipe cutter is designed for: steel.
This tubing cutter has a width of 67.5 mm, a height of 144.5 mm, and a length of 8½ inch. It features fold-away reamer. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, brass, copper and includes spare cutting wheel for copper.
This tubing cutter has a width of 67.5 mm, a height of 144.5 mm, and a length of 8½ inch. It features fold-away reamer. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, brass, copper and includes spare cutting wheel for copper.
This tubing cutter has a width of 36 mm, a height of 48.5 mm, and a length of 4 inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 36 mm, a height of 48.5 mm, and a length of 4 inch. It features grooved rollers for close-to-flare cuts. In addition, it is made of steel, zinc, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This pipe cutter has a width of 4½ inch, a height of 2 inch, and a length of 20 inch. It features convertible to three wheels. In addition, it is made of steel, aluminum, and is not tether ready. This pipe cutter is designed for: aluminum, brass, copper, steel.
This pipe cutter has a width of 4½ inch, a height of 2 inch, and a length of 20 inch. It features convertible to three wheels. In addition, it is made of steel, aluminum, and is not tether ready. This pipe cutter is designed for: aluminum, brass, copper, steel.
Die cast aluminum alloy. Hardened steel blade. Ratchet action. Auto reverse design returns blade automatically when cut is complete. For cutting PVC. Includes blade.
Die cast aluminum alloy. Hardened steel blade. Ratchet action. Auto reverse design returns blade automatically when cut is complete. For cutting PVC. Includes blade.
This tubing cutter has a width of 89.5 mm, a height of 215 mm, and a length of 11½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
This tubing cutter has a width of 89.5 mm, a height of 215 mm, and a length of 11½ inch. It features fold-away reamer, grooved rollers with flare cutoff groove. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: aluminum, copper, steel and includes spare cutting wheel for copper.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
