Cable Cutters

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.

For very tough, continuous use. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio. Precision cutting edges (cutting edge hardness approx. 64 HRC) cuts several types of wire including piano wire. Chrome vanadium heavy-duty steel- forged, oil-hardened.

For very tough, continuous use. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio. Precision cutting edges (cutting edge hardness approx. 64 HRC) cuts several types of wire including piano wire. Chrome vanadium heavy-duty steel- forged, oil-hardened.

For cutting copper & aluminium cables. Not suitable for ACSR, steel wire, and hard drawn copper conductors. Precision ground, hardened blades. Clean and smooth cut without crushing or deformation. By dividing the cutting actions into intital cut (insulating sheath in the front cutting area) and final cut (conductor in the back cutting area), cables up to 51/64" can be cut in one handed operation. Pinch guard and slip guard. Adjustable screw joint: self-locking.

For cutting copper & aluminium cables. Not suitable for ACSR, steel wire, and hard drawn copper conductors. Precision ground, hardened blades. Clean and smooth cut without crushing or deformation. By dividing the cutting actions into intital cut (insulating sheath in the front cutting area) and final cut (conductor in the back cutting area), cables up to 51/64" can be cut in one handed operation. Pinch guard and slip guard. Adjustable screw joint: self-locking.

For cutting copper and aluminium cables, single and multiple wire. Not suitable for ACSR, steel wire and hard drawn copper conductors. Precision ground, hardened blades. Clean and smooth cut without crushing and deformation. Easy cutting with one hand operation. Pinch guard and slip guard. Adjustable bolted joint, self-locking screw. High grade special tool steel: forged and oil-hardened.

For cutting copper and aluminium cables, single and multiple wire. Not suitable for ACSR, steel wire and hard drawn copper conductors. Precision ground, hardened blades. Clean and smooth cut without crushing and deformation. Easy cutting with one hand operation. Pinch guard and slip guard. Adjustable bolted joint, self-locking screw. High grade special tool steel: forged and oil-hardened.

This 200-millimetre cable cutter has hardened blades suitable for cutting 51/64-inch copper and aluminum. It comes with plastic handles, pinch guards, and slip guards.

This 200-millimetre cable cutter has hardened blades suitable for cutting 51/64-inch copper and aluminum. It comes with plastic handles, pinch guards, and slip guards.

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.

Two crimping dies for end caps on Bowden cable sheaths and end ferrules for wire rope. Comfortable work thanks to slim design and internal opening spring. Bolted joint for precise blade guidance, readjustable. High leverage for reduced effort. Cutting edge approx. 64 HRC. Chrome vanadium heavy duty steel: forged and oil hardened

Two crimping dies for end caps on Bowden cable sheaths and end ferrules for wire rope. Comfortable work thanks to slim design and internal opening spring. Bolted joint for precise blade guidance, readjustable. High leverage for reduced effort. Cutting edge approx. 64 HRC. Chrome vanadium heavy duty steel: forged and oil hardened

For cutting copper and aluminium cables, single and multiple wire. Not suitable for ACSR, steel wire and wire ropes. Precision ground, hardenend blades. Clean and smooth cut without crushing and deformation. Low handforce required due to favorable lever ratio and new blade geometry. Short design, length only 20". Lightweight with pinch guard. Adjustable bolted joint. Cutter head: Vanadium electric steel: forged and oil-hardened. Handle shank: aluminium tube, high strength.

For cutting copper and aluminium cables, single and multiple wire. Not suitable for ACSR, steel wire and wire ropes. Precision ground, hardenend blades. Clean and smooth cut without crushing and deformation. Low handforce required due to favorable lever ratio and new blade geometry. Short design, length only 20". Lightweight with pinch guard. Adjustable bolted joint. Cutter head: Vanadium electric steel: forged and oil-hardened. Handle shank: aluminium tube, high strength.

For cutting copper & aluminium cables, single and multiple wire. Not suitable for ACSR, Steel Wire and wire ropes. Precision ground, hardened blades. Clean and smooth cut without crushing or deformation. One handed operation using ratchet principle. Little handforce required due to very high transmission ratio. Two-stage ratchet drive for easy cutting. Simple handling as a result of light weight and compact design. Pinch gaurd and slip guard. High-grade special tool steel: forged oil-hardened.

For cutting copper & aluminium cables, single and multiple wire. Not suitable for ACSR, Steel Wire and wire ropes. Precision ground, hardened blades. Clean and smooth cut without crushing or deformation. One handed operation using ratchet principle. Little handforce required due to very high transmission ratio. Two-stage ratchet drive for easy cutting. Simple handling as a result of light weight and compact design. Pinch gaurd and slip guard. High-grade special tool steel: forged oil-hardened.

For cutting copper & aluminium cables, single and multiple wire. Not suitable for ACSR, Steel Wire and wire ropes. Precision ground, hardened blades. Clean and smooth cut without crushing or deformation. One handed operation using ratchet principle. Little handforce required due to very high transmission ratio. Two-stage ratchet drive for easy cutting. Simple handling as a result of light weight and compact design. Pinch gaurd and slip guard. High-grade special tool steel: forged oil-hardened.

For cutting copper & aluminium cables, single and multiple wire. Not suitable for ACSR, Steel Wire and wire ropes. Precision ground, hardened blades. Clean and smooth cut without crushing or deformation. One handed operation using ratchet principle. Little handforce required due to very high transmission ratio. Two-stage ratchet drive for easy cutting. Simple handling as a result of light weight and compact design. Pinch gaurd and slip guard. High-grade special tool steel: forged oil-hardened.

For cutting copper and aluminium cables, single and multiple wire. Not suitable for ACSR, steel wire and hard drawn copper conductors. Precision ground, hardened blades. Clean and smooth cut without crushing and deformation. Easy cutting with one hand operation. Pinch guard and slip guard. Adjustable bolted joint, self-locking screw. High grade special tool steel: forged and oil-hardened.

For cutting copper and aluminium cables, single and multiple wire. Not suitable for ACSR, steel wire and hard drawn copper conductors. Precision ground, hardened blades. Clean and smooth cut without crushing and deformation. Easy cutting with one hand operation. Pinch guard and slip guard. Adjustable bolted joint, self-locking screw. High grade special tool steel: forged and oil-hardened.

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.

For cable diameters up to 1 1/2": handles can be positioned at an angle to set the optimum width. Heavy duty telescopic handles made of oval aluminum tubing: extendable up to 30" for max leverage on large cable diameters: retractable down to 22" for min space requirements during transport. replaceable cutting head. Extensive cutting range up to max 1-1/2" or max 550 MCM in copper & aluminium cables. Adjustable bolted joint. Cutting head: special quality, high grade tool steel: oil-hardened.