Colliers de serrage à vis sans fin pour tubes et tuyaux

Ce collier de serrage à boulon en T à ressort est doté d'une vis de 7/16 de pouce et d'une bande de serrage de ¾ de pouce de large. Il mesure 0,025 pouce d'épaisseur et a un couple d'installation de 75 po-livres. Ce collier de serrage en acier inoxydable a un diamètre maximal de 3 3/16 po et peut être ajusté à un diamètre minimal de 3 1/16 po. Il est vendu par multiples de 10 unités.

Ce collier de serrage à boulon en T à ressort est doté d'une vis de 7/16 de pouce et d'une bande de serrage de ¾ de pouce de large. Il mesure 0,025 pouce d'épaisseur et a un couple d'installation de 75 po-livres. Ce collier de serrage en acier inoxydable a un diamètre maximal de 3 3/16 po et peut être ajusté à un diamètre minimal de 3 1/16 po. Il est vendu par multiples de 10 unités.

Ce collier de serrage en acier inoxydable ordinaire est doté d'une vis en acier inoxydable à fente hexagonale de 8 mm x 5/16 po et d'une bande de ½ pouce de large. Il a un diamètre maximum de dix po et peut être ajusté à un diamètre minimum de deux po.

Ce collier de serrage en acier inoxydable ordinaire est doté d'une vis en acier inoxydable à fente hexagonale de 8 mm x 5/16 po et d'une bande de ½ pouce de large. Il a un diamètre maximum de dix po et peut être ajusté à un diamètre minimum de deux po.

This regular stainless steel hose clamp has an 8-millimetre x 5/16 inch hex slotted stainless steel screw and a 1/2 inch wide band. It has a maximum diameter of 1-3/4 inches and can be adjusted to a minimum diameter of 3/4 inches.

This regular stainless steel hose clamp has an 8-millimetre x 5/16 inch hex slotted stainless steel screw and a 1/2 inch wide band. It has a maximum diameter of 1-3/4 inches and can be adjusted to a minimum diameter of 3/4 inches.

This regular stainless steel hose clamp has an 8-millimetre x 5/16 inch hex slotted stainless steel screw and a 1/2 inch wide band. It has a maximum diameter of 3-1/2 inches and can be adjusted to a minimum diameter of 2-9/16 inches.

This regular stainless steel hose clamp has an 8-millimetre x 5/16 inch hex slotted stainless steel screw and a 1/2 inch wide band. It has a maximum diameter of 3-1/2 inches and can be adjusted to a minimum diameter of 2-9/16 inches.

Micro hose clamp, 5/16 in. 301 stainless steel band, 301 stainless steel housing, 1/4 in. hex slotted carbon clear chromate plated screw, range of adjustment 5/16 in. (8 mm) minimum to 5/8 in. (16 mm) maximum.

Micro hose clamp, 5/16 in. 301 stainless steel band, 301 stainless steel housing, 1/4 in. hex slotted carbon clear chromate plated screw, range of adjustment 5/16 in. (8 mm) minimum to 5/8 in. (16 mm) maximum.

This regular stainless steel hose clamp has a maximum diameter of 7-3/4 inches and can be adjusted to a minimum diameter of 5-3/4 inches. It has a hex slotted 5/16 inches clear chromate plated screw and a 1/2 inch clamp band.

This regular stainless steel hose clamp has a maximum diameter of 7-3/4 inches and can be adjusted to a minimum diameter of 5-3/4 inches. It has a hex slotted 5/16 inches clear chromate plated screw and a 1/2 inch clamp band.

This SAE 175 flex gear hose clamp has a 3/8 inch plated carbon hex head nut and a 5/8 inch wide band. Its spring is designed to eliminate cold-flow leakage caused by fluctuating temperatures. This hose clamp has a maximum diameter of 1-3/4 inches and can be adjusted to a minimum diameter of one inch. It is made of stainless steel.

This SAE 175 flex gear hose clamp has a 3/8 inch plated carbon hex head nut and a 5/8 inch wide band. Its spring is designed to eliminate cold-flow leakage caused by fluctuating temperatures. This hose clamp has a maximum diameter of 1-3/4 inches and can be adjusted to a minimum diameter of one inch. It is made of stainless steel.

This SAE 150 standard T-bolt hose clamp provides uniform sealing pressure for a positive reliable seal and is designed for high vibration and large diameter applications. It has a 7/16 inch screw and a 3/4 inch wide hose clamp band. It has a maximum diameter of 1-17/25 inches and can be adjusted to a minimum diameter of 1-1/2 inches. It is made of 300 stainless steel and can be purchased in multiples of ten units.

This SAE 150 standard T-bolt hose clamp provides uniform sealing pressure for a positive reliable seal and is designed for high vibration and large diameter applications. It has a 7/16 inch screw and a 3/4 inch wide hose clamp band. It has a maximum diameter of 1-17/25 inches and can be adjusted to a minimum diameter of 1-1/2 inches. It is made of 300 stainless steel and can be purchased in multiples of ten units.

This regular stainless steel hose clamp has an 8-millimetre x 5/16 inch hex slotted stainless steel screw and a 1/2 inch wide band. It has a maximum diameter of six inches and can be adjusted to a minimum diameter of 2-3/4 inches.

This regular stainless steel hose clamp has an 8-millimetre x 5/16 inch hex slotted stainless steel screw and a 1/2 inch wide band. It has a maximum diameter of six inches and can be adjusted to a minimum diameter of 2-3/4 inches.

This regular stainless steel hose clamp has a maximum diameter of 13-3/4 inches and can be adjusted to a minimum diameter of 11-3/4 inches. It has a hex slotted 5/16 inches clear chromate plated screw and a 1/2 inch clamp band.

This regular stainless steel hose clamp has a maximum diameter of 13-3/4 inches and can be adjusted to a minimum diameter of 11-3/4 inches. It has a hex slotted 5/16 inches clear chromate plated screw and a 1/2 inch clamp band.

Hose clamp, 5/16 hex slotted carbon clear chromate plated screw, 1/2 in. 301 stainless steel band, 301 stainless steel housing, range of adjustment: 1-5/16 in.es minimum to 2-1/4 in. maximum.

Hose clamp, 5/16 hex slotted carbon clear chromate plated screw, 1/2 in. 301 stainless steel band, 301 stainless steel housing, range of adjustment: 1-5/16 in.es minimum to 2-1/4 in. maximum.

Constant-tension type with unique wave ring technology to help maintain steady pressure around the entire connection. 9/16 inch band width. 300 stainless steel band/housing. 410 stainless steel screw.

Constant-tension type with unique wave ring technology to help maintain steady pressure around the entire connection. 9/16 inch band width. 300 stainless steel band/housing. 410 stainless steel screw.

This SAE 19 wave seal hose clamp has a unique wave ring technology to help maintain steady pressure around the entire connection. This constant tension hose clamp has a 9/16 inch wide band and a 5/16 inch screw. It has a maximum diameter of 1-1/2 inches and can be adjusted to a minimum diameter of 1-3/8 inches and is made of stainless steel. This item is sold in multiples of ten units.

This SAE 19 wave seal hose clamp has a unique wave ring technology to help maintain steady pressure around the entire connection. This constant tension hose clamp has a 9/16 inch wide band and a 5/16 inch screw. It has a maximum diameter of 1-1/2 inches and can be adjusted to a minimum diameter of 1-3/8 inches and is made of stainless steel. This item is sold in multiples of ten units.

This SAE 40 wave seal hose clamp has a unique wave ring technology to help maintain steady pressure around the entire connection. This constant tension hose clamp has a 9/16 inch wide band and a 5/16 inch screw. It has a maximum diameter of 2-13/16 inches and can be adjusted to a minimum diameter of 1-13/16 inches and is made of stainless steel.

This SAE 40 wave seal hose clamp has a unique wave ring technology to help maintain steady pressure around the entire connection. This constant tension hose clamp has a 9/16 inch wide band and a 5/16 inch screw. It has a maximum diameter of 2-13/16 inches and can be adjusted to a minimum diameter of 1-13/16 inches and is made of stainless steel.