Product ITEM is unavailable. See products from the same category below.
General Purpose Spiral-Point Taps
General purpose spiral-point taps are intended for threading a wide range of materials. The taps have straight flutes with a spiral point that pushes chips in front of the tap as it moves into a hole and out the other side, eventually forcing the chips out of the hole. They create internal threads in through holes and are installed into a toolholder on a machine such as a lathe or CNC machine to operate.
This tap is made of high speed steel and has a 0.168 inch diameter, 1.3650 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.168 inch diameter, 1.3650 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.168 inch diameter, 1.4330 inch long shank. It meets the standards for ANSI. This 105 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.168 inch diameter, 1.4330 inch long shank. It meets the standards for ANSI. This 105 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.367 inch diameter, 1.9960 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.367 inch diameter, 1.9960 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 3.57mm diameter, 33 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 49 mm length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 3.57mm diameter, 33 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 49 mm length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 5 mm diameter, 37 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 5 mm diameter, 37 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 2.80mm diameter, 33 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 44 mm length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 2.80mm diameter, 33 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 44 mm length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 10.31mm diameter, 61 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 102 mm length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 10.31mm diameter, 61 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 102 mm length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 7.26mm diameter, 42 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 7.26mm diameter, 42 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 10.31mm diameter, 61 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 4-1/32 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 10.31mm diameter, 61 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 4-1/32 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 8.18mm diameter, 54 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 8.18mm diameter, 54 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 6.90mm diameter, 50 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 86 mm length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 6.90mm diameter, 50 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 86 mm length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 2.80mm diameter, 34 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 46 mm length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 2.80mm diameter, 34 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 46 mm length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 12.42mm diameter, 68 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 4-15/32 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 12.42mm diameter, 68 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 4-15/32 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.323 inch diameter, 1.8350 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.323 inch diameter, 1.8350 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has three flutes and a straight shank.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
