Product ITEM is unavailable. See products from the same category below.
Threadlockers for Metals
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are colour-coded to represent their locking strength and other unique properties. They are anaerobic, which means they begin to cure in the absence of air, and in the presence of metal ions when threads are engaged. Threadlockers can be applied directly to fasteners with active metal ions such as plain steel, copper, iron, and brass. For inactive metals such as stainless steel, aluminum, and coated or plated metals, threadlockers require a primer to prepare the surface and accelerate curing. Primerless threadlockers work on both active and inactive metals without the need for a primer.
This primerless high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.
This primerless high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.
243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 250 mL bottle.
243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 250 mL bottle.
This six-millilitre series 243 medium-strength threadlocker has a 24-hour full cure and 1350 to 3000 thixotropic viscosity. With a dimethacrylate ester chemical type, this surf-insensitive threadlocker has 1.08 specific gravity and a flash point greater than 93.3C. It is oil-resistant and is removable with 1/4 to 3/4-inch hardware.
This six-millilitre series 243 medium-strength threadlocker has a 24-hour full cure and 1350 to 3000 thixotropic viscosity. With a dimethacrylate ester chemical type, this surf-insensitive threadlocker has 1.08 specific gravity and a flash point greater than 93.3C. It is oil-resistant and is removable with 1/4 to 3/4-inch hardware.
This series 2620 high-temperature threadlocker has a 24-hour full cure, 20,000 to 70,000 viscosity, and is available in a 30-gram syringe. With a dimethacrylate ester chemical type, this high-strength threadlocker has 1.16 specific gravity and is removable with localized heat and hand tools.
This series 2620 high-temperature threadlocker has a 24-hour full cure, 20,000 to 70,000 viscosity, and is available in a 30-gram syringe. With a dimethacrylate ester chemical type, this high-strength threadlocker has 1.16 specific gravity and is removable with localized heat and hand tools.
This series 243 medium-strength threadlocker has a 24-hour full cure, 1350 to 3000 thixotropic viscosity, and is available in a 36-millilitre bottle. With a dimethacrylate ester chemical type, this surf-insensitive threadlocker has 1.08 specific gravity and a flash point greater than 93.3C. It is oil-resistant and is removable with 1/4 to 3/4-inch hardware.
This series 243 medium-strength threadlocker has a 24-hour full cure, 1350 to 3000 thixotropic viscosity, and is available in a 36-millilitre bottle. With a dimethacrylate ester chemical type, this surf-insensitive threadlocker has 1.08 specific gravity and a flash point greater than 93.3C. It is oil-resistant and is removable with 1/4 to 3/4-inch hardware.
This threadlocker tape is blue and comes in a roll. It meets the standards for ASTM D-5648, ISO 10964. This threadlocker tape has a threadlocking strength of medium, and is no-drip.
This threadlocker tape is blue and comes in a roll. It meets the standards for ASTM D-5648, ISO 10964. This threadlocker tape has a threadlocking strength of medium, and is no-drip.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
This low-strength threadlocker is purple and comes in a 8.45 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.
This low-strength threadlocker is purple and comes in a 8.45 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.
This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of four minutes, and has a threadlocking strength of high.
This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of four minutes, and has a threadlocking strength of high.
This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A, UL Listed. This high-strength threadlocker has a working time of five minutes, and has a threadlocking strength of high, and is oil tolerant.
This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A, UL Listed. This high-strength threadlocker has a working time of five minutes, and has a threadlocking strength of high, and is oil tolerant.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
This thread locker is blue and comes in a 0.5 mL bottle. It meets the standards for P1 NSF Reg. No. : 123000, RoHs. This thread locker has a working time of 10 minutes, and has a threadlocking strength of medium, plus it is no-drip and oil tolerant.
This thread locker is blue and comes in a 0.5 mL bottle. It meets the standards for P1 NSF Reg. No. : 123000, RoHs. This thread locker has a working time of 10 minutes, and has a threadlocking strength of medium, plus it is no-drip and oil tolerant.
243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 50 mL bottle.
243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 50 mL bottle.
This primerless high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.
This primerless high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.
This series 294 high-temperature threadlocker has a 24-hour full cure and is available in a 50-millilitre bottle. With an anaerobic chemical type, this threadlocker has 1.12 specific gravity and a flash point greater than 93.3C. It is removable with hand tools and localized heat.
This series 294 high-temperature threadlocker has a 24-hour full cure and is available in a 50-millilitre bottle. With an anaerobic chemical type, this threadlocker has 1.12 specific gravity and a flash point greater than 93.3C. It is removable with hand tools and localized heat.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
