Sheet Metal Snips, Notchers & Nibblers

9 inch Metal-Wizz multi-purpose snips. Cut length 1-3/8 inches. 20 gauge capacity. General purpose compound action snips for the home craftsman. Cuts screening, light gauge sheet metal, synthetic shingles, tile, gutters and downspouts, carpeting and more.

9 inch Metal-Wizz multi-purpose snips. Cut length 1-3/8 inches. 20 gauge capacity. General purpose compound action snips for the home craftsman. Cuts screening, light gauge sheet metal, synthetic shingles, tile, gutters and downspouts, carpeting and more.

9-3/4 inch Metalmaster compound action snips. Left cut. Red handle. 18 gauge capacity. Non-slip serrated molybdenum steel jaws. Withstands severe strain of cutting heavy stock and tight curves. Self-opening action. Safety latch. Non-slip, textured grips.

9-3/4 inch Metalmaster compound action snips. Left cut. Red handle. 18 gauge capacity. Non-slip serrated molybdenum steel jaws. Withstands severe strain of cutting heavy stock and tight curves. Self-opening action. Safety latch. Non-slip, textured grips.

Produces true 30 degree V-shaped cut in sheet metal. Gives clean notch without slipping at corners and take-off tabs. Non-slip cushion grips for superior comfort and control. Blade length 13/16 inches. Length 8-3/4 inches. Throat depth 13/16 inches.

Produces true 30 degree V-shaped cut in sheet metal. Gives clean notch without slipping at corners and take-off tabs. Non-slip cushion grips for superior comfort and control. Blade length 13/16 inches. Length 8-3/4 inches. Throat depth 13/16 inches.

This straight pattern tinner snips has a length of 10¼ inch. The steel handle is black/orange and has a straight style/type. It features high durometer grips, hot drop forged steel blades, precision-ground cutting edges, through b and more and meets the standards for ASME B107.16M. In addition, it is made of drop forged steel, plus it is not non-sparking, with a plastic grip. This straight pattern tinner snips is designed for: aluminum, steel, vinyl.

This straight pattern tinner snips has a length of 10¼ inch. The steel handle is black/orange and has a straight style/type. It features high durometer grips, hot drop forged steel blades, precision-ground cutting edges, through b and more and meets the standards for ASME B107.16M. In addition, it is made of drop forged steel, plus it is not non-sparking, with a plastic grip. This straight pattern tinner snips is designed for: aluminum, steel, vinyl.

9-3/4 inch Metalmaster special series snips. Right cut. 18 gauge capacity. Hardened to cut Iconel, stainless steel and titanium. Non-slip serrated jaw of molybdenum steel. High tensile strength alloy steel handle. Non-slip, textured grips and safety latch.

9-3/4 inch Metalmaster special series snips. Right cut. 18 gauge capacity. Hardened to cut Iconel, stainless steel and titanium. Non-slip serrated jaw of molybdenum steel. High tensile strength alloy steel handle. Non-slip, textured grips and safety latch.

9-3/4 inch Metalmaster compound action snips. Straight cut. Yellow handle. 18 gauge capacity. Non-slip serrated molybdenum steel jaws. Withstands strain of cutting heavy stock and tight curves. Self-opening action. Safety latch. Non-slip, textured grips.

9-3/4 inch Metalmaster compound action snips. Straight cut. Yellow handle. 18 gauge capacity. Non-slip serrated molybdenum steel jaws. Withstands strain of cutting heavy stock and tight curves. Self-opening action. Safety latch. Non-slip, textured grips.

9-1/4 inch Metalmaster offset snips. Right cut. Green handle. 18 gauge capacity. Non-slip serrated jaw of molybdenum steel. Withstands strain of cutting heavy stock and tight curves. Non-slip, textured grips and safety latch for superior control.

9-1/4 inch Metalmaster offset snips. Right cut. Green handle. 18 gauge capacity. Non-slip serrated jaw of molybdenum steel. Withstands strain of cutting heavy stock and tight curves. Non-slip, textured grips and safety latch for superior control.

9-1/4 inch Metalmaster compound action bulldog snip for notching or trimming extra heavy stock. Cut length 7/8 inch. 16 gauge capacity.

9-1/4 inch Metalmaster compound action bulldog snip for notching or trimming extra heavy stock. Cut length 7/8 inch. 16 gauge capacity.

9-1/4 inch Metalmaster offset snips. Left cut. Red handle. 18 gauge capacity. Non-slip serrated jaw of molybdenum steel. Withstands strain of cutting heavy stock and tight curves. Non-slip, textured grips and safety latch for superior control.

9-1/4 inch Metalmaster offset snips. Left cut. Red handle. 18 gauge capacity. Non-slip serrated jaw of molybdenum steel. Withstands strain of cutting heavy stock and tight curves. Non-slip, textured grips and safety latch for superior control.

This aviation snip has a length of 9¾ inch. The plastic handle is green/red/yellow with an ergonomic style/type. It features extended non-slip handles, free float pivot bolt, left or right hand use, single-handed latch and more. In addition, it is made of steel, with a plastic grip. This aviation snip is designed for: aluminum, cold rolled steel, stainless steel and includes three pieces.

This aviation snip has a length of 9¾ inch. The plastic handle is green/red/yellow with an ergonomic style/type. It features extended non-slip handles, free float pivot bolt, left or right hand use, single-handed latch and more. In addition, it is made of steel, with a plastic grip. This aviation snip is designed for: aluminum, cold rolled steel, stainless steel and includes three pieces.

This straight pattern tinner snips has a length of 7¼ inch. The steel handle is black/orange and has a straight style/type. It features high durometer grips, hot drop forged steel blades, precision-ground cutting edges, through b and more and meets the standards for ASME B107.16M. In addition, it is made of drop forged steel, plus it is not non-sparking, with a plastic grip. This straight pattern tinner snips is designed for: aluminum, steel, vinyl.

This straight pattern tinner snips has a length of 7¼ inch. The steel handle is black/orange and has a straight style/type. It features high durometer grips, hot drop forged steel blades, precision-ground cutting edges, through b and more and meets the standards for ASME B107.16M. In addition, it is made of drop forged steel, plus it is not non-sparking, with a plastic grip. This straight pattern tinner snips is designed for: aluminum, steel, vinyl.

9-3/4 inch Metalmaster compound action snips. Right cut. Green handle. 18 gauge capacity. Non-slip serrated molybdenum steel jaws. Withstands strain of cutting heavy stock and tight curves. Self-opening action. Safety latch. Non-slip, textured grips.

9-3/4 inch Metalmaster compound action snips. Right cut. Green handle. 18 gauge capacity. Non-slip serrated molybdenum steel jaws. Withstands strain of cutting heavy stock and tight curves. Self-opening action. Safety latch. Non-slip, textured grips.

This straight pattern tinner snips has a length of 12¼ inch. The steel handle is black/orange and has a straight style/type. It features high durometer grips, hot drop forged steel blades, precision-ground cutting edges, through b and more and meets the standards for ASME B107.16M. In addition, it is made of drop forged steel, plus it is not non-sparking, with a plastic grip. This straight pattern tinner snips is designed for: aluminum, steel, vinyl.

This straight pattern tinner snips has a length of 12¼ inch. The steel handle is black/orange and has a straight style/type. It features high durometer grips, hot drop forged steel blades, precision-ground cutting edges, through b and more and meets the standards for ASME B107.16M. In addition, it is made of drop forged steel, plus it is not non-sparking, with a plastic grip. This straight pattern tinner snips is designed for: aluminum, steel, vinyl.