Product ITEM is unavailable. See products from the same category below.
Retaining-Ring Pliers & Sets
Retaining-ring pliers install and remove snap rings that fit into a bore or onto a shaft and hold components in place. Also known as circlip pliers, their tips provide a firm grip on the rings to prevent them from flying off. Each pair of pliers adjusts its jaws to accommodate rings within a set diameter range. Retaining-ring pliers are commonly used to place rings on actuators, gear assemblies, motor shafts, and other machinery.
This 44 series retaining ring pliers has a length of 5½ inch, plus it weighs 89 g. The handle is red. It features non-slip tips and meets the standards for DIN 5256 C. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This 44 series retaining ring pliers has a length of 5½ inch, plus it weighs 89 g. The handle is red. It features non-slip tips and meets the standards for DIN 5256 C. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
Heavy-duty for continuous operation: up to 10 times longer service life than turned tips. Large contact faces on the tips: no distortion of circlips, easy fitting. Joint with screw: precise, zero-backlash operation of pliers. Internal opening spring, protected. Non-slip plastic coating on handles. Pliers body: Chrome Vanadium electric steel: forged and oil hardened. Inserted tips: spring steel wire, drawn
Heavy-duty for continuous operation: up to 10 times longer service life than turned tips. Large contact faces on the tips: no distortion of circlips, easy fitting. Joint with screw: precise, zero-backlash operation of pliers. Internal opening spring, protected. Non-slip plastic coating on handles. Pliers body: Chrome Vanadium electric steel: forged and oil hardened. Inserted tips: spring steel wire, drawn
This 46 series retaining ring pliers has a length of 5½ inch, plus it weighs 85 g. The handle is black. It features non-slip tips and meets the standards for DIN 5254 A. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This 46 series retaining ring pliers has a length of 5½ inch, plus it weighs 85 g. The handle is black. It features non-slip tips and meets the standards for DIN 5254 A. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This 46 series retaining ring pliers has a length of 22 inch, plus it weighs 1,773 g. The handle is black and has a standard style/type. It features locking device and meets the standards for DIN 5254 A. In addition, it has a powder coated finish, plus it is non-sparking, and is not tether ready with a plain grip.
This 46 series retaining ring pliers has a length of 22 inch, plus it weighs 1,773 g. The handle is black and has a standard style/type. It features locking device and meets the standards for DIN 5254 A. In addition, it has a powder coated finish, plus it is non-sparking, and is not tether ready with a plain grip.
Heavy-duty for continuous operation: up to 10 times longer service life than turned tips. Bolted joint: precise, zero backlash operation of pliers. Non-slip plastic coating on the handles. Pliers Body: Chrome Vanadium electric steel, forged and oil hardened. Inserted tips: spring steel wire, drawn.
Heavy-duty for continuous operation: up to 10 times longer service life than turned tips. Bolted joint: precise, zero backlash operation of pliers. Non-slip plastic coating on the handles. Pliers Body: Chrome Vanadium electric steel, forged and oil hardened. Inserted tips: spring steel wire, drawn.
For fitting circlips on bore holes, range of application from 5/16" - 5 33/64" dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome vanadium steel: forged and oil hardened
For fitting circlips on bore holes, range of application from 5/16" - 5 33/64" dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome vanadium steel: forged and oil hardened
This retaining ring plier set has a length of 5¾ inch, 8 inch. The handle is red. It features help install and remove internal and external retaining rings and meets the standards for DIN 5254 B, DIN 5256 D. In addition, it is non-sparking, with a standard cushion grip. This retaining ring plier set includes nylon pouch with locking clip.
This retaining ring plier set has a length of 5¾ inch, 8 inch. The handle is red. It features help install and remove internal and external retaining rings and meets the standards for DIN 5254 B, DIN 5256 D. In addition, it is non-sparking, with a standard cushion grip. This retaining ring plier set includes nylon pouch with locking clip.
This 44 series retaining ring pliers has a length of 23⅝ inch, plus it weighs 1,723 g. The handle is red. It features locking device and meets the standards for DIN 5256 D. In addition, it has a powder coated finish, plus it is non-sparking, and is not tether ready with a plain grip.
This 44 series retaining ring pliers has a length of 23⅝ inch, plus it weighs 1,723 g. The handle is red. It features locking device and meets the standards for DIN 5256 D. In addition, it has a powder coated finish, plus it is non-sparking, and is not tether ready with a plain grip.
This 44 series retaining ring pliers has a length of 5½ inch, plus it weighs 88 g. The handle is red. It features non-slip tips and meets the standards for DIN 5256 C. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This 44 series retaining ring pliers has a length of 5½ inch, plus it weighs 88 g. The handle is red. It features non-slip tips and meets the standards for DIN 5256 C. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This retaining ring plier set has a length of 6¾ inch, 7¼ inch. The handle is red. It features adjustable snap-closure, sturdy and meets the standards for DIN 5254 A, DIN 5254 B, DIN 5256 C, DIN 5256 D. In addition, it has a atramentized phosphate coat finish. This retaining ring plier set includes four circlip pliers.
This retaining ring plier set has a length of 6¾ inch, 7¼ inch. The handle is red. It features adjustable snap-closure, sturdy and meets the standards for DIN 5254 A, DIN 5254 B, DIN 5256 C, DIN 5256 D. In addition, it has a atramentized phosphate coat finish. This retaining ring plier set includes four circlip pliers.
Heavy-duty for continuous operation: up to 10 times longer service life than turned tips. Large contact faces on the tips: no distortion of circlips, easy fitting. Joint with screw: precise, zero-backlash operation of pliers. Internal opening spring, protected. Non-slip plastic coating on handles. Pliers body: Chrome Vanadium electric steel: forged and oil hardened. Inserted tips: spring steel wire, drawn
Heavy-duty for continuous operation: up to 10 times longer service life than turned tips. Large contact faces on the tips: no distortion of circlips, easy fitting. Joint with screw: precise, zero-backlash operation of pliers. Internal opening spring, protected. Non-slip plastic coating on handles. Pliers body: Chrome Vanadium electric steel: forged and oil hardened. Inserted tips: spring steel wire, drawn
For fitting circlips on bore holes, range of application from 5/16" - 5 33/64" dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome vanadium steel: forged and oil hardened
For fitting circlips on bore holes, range of application from 5/16" - 5 33/64" dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome vanadium steel: forged and oil hardened
For fitting circlips on shafts, range of application from 1.8" - 5 33/64" Dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome Vanadium Steel, forged and oil-hardened
For fitting circlips on shafts, range of application from 1.8" - 5 33/64" Dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome Vanadium Steel, forged and oil-hardened
This 46 series retaining ring pliers has a length of 5 inch, plus it weighs 85 g. The handle is black. It features non-slip tips and meets the standards for DIN 5254 B. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This 46 series retaining ring pliers has a length of 5 inch, plus it weighs 85 g. The handle is black. It features non-slip tips and meets the standards for DIN 5254 B. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This 44 series retaining ring pliers has a length of 8½ inch, plus it weighs 200 g. The handle is red. It features non-slip tips and meets the standards for DIN 5256 D. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This 44 series retaining ring pliers has a length of 8½ inch, plus it weighs 200 g. The handle is red. It features non-slip tips and meets the standards for DIN 5256 D. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
For fitting circlips on shafts, range of application from 1.8" - 5 33/64" Dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome Vanadium Steel, forged and oil-hardened
For fitting circlips on shafts, range of application from 1.8" - 5 33/64" Dia. Solid style, forged. Non-slip, solid tips. Pliers body and tips: Chrome Vanadium Steel, forged and oil-hardened
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
