Product ITEM is unavailable. See products from the same category below.
Extension Taps
Extension taps have long shanks that allow them to tap deep holes and access holes that a standard tap could not reach. They create internal threads in holes, and their reduced-diameter shank clears the hole when tapping a hole at a depth that is greater than the taps' thread length.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.
This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.
This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.
This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.
This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 4/9 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 4/9 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.
This ELPTT-TN pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.
This ELPTT-TN pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter along with a three-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅜ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter along with a three-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅜ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅝ inch length. Plus it has five flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅝ inch length. Plus it has five flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3½ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 5¼ inch length. Plus it has five flutes.
This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3½ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 5¼ inch length. Plus it has five flutes.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
