Product ITEM is unavailable. See products from the same category below.
Mechanics-Length Drill Bits
Mechanics-length drill bits have a shorter flute length and less overall length than jobber-length bits of the same size. They provide less drilling depth but are stronger, more rigid, and less likely to break or shear when drilling hard materials than jobber-length bits.
This mechanics length drill bit is made of cobalt and has a 7/16 inch diameter, 1 9/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 2 15/16 inch spiral flutes, a straight shank, and 135 Degrees split point.
This mechanics length drill bit is made of cobalt and has a 7/16 inch diameter, 1 9/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 2 15/16 inch spiral flutes, a straight shank, and 135 Degrees split point.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
This mechanics length drill bit is made of cobalt and has a 7/64 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two one-inch spiral flutes, a straight shank, and 135 Degrees split point.
This mechanics length drill bit is made of cobalt and has a 7/64 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two one-inch spiral flutes, a straight shank, and 135 Degrees split point.
This mechanics length drill bit is made of cobalt and has a ½ inch diameter, 1⅝ inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a five-inch length. Plus it has two 3⅜ inch spiral flutes, a straight shank, and 135 Degrees split point.
This mechanics length drill bit is made of cobalt and has a ½ inch diameter, 1⅝ inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a five-inch length. Plus it has two 3⅜ inch spiral flutes, a straight shank, and 135 Degrees split point.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
This mechanics length drill bit is made of cobalt and has a 11/32 inch diameter, 1½ inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and 135 Degrees split point.
This mechanics length drill bit is made of cobalt and has a 11/32 inch diameter, 1½ inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and 135 Degrees split point.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
This mechanics length drill bit is made of cobalt and has a ⅛ inch diameter, 1 1/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and 135 Degrees split point.
This mechanics length drill bit is made of cobalt and has a ⅛ inch diameter, 1 1/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, hard material, inconel, and meets ASME standards. This 1880 series drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and 135 Degrees split point.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
This mechanics length drill bit is made of high speed steel and has a 15/32 inch diameter, 1⅝ inch long shank. It is for use with cast iron, steel, cast iron, and meets ASME standards. This 1875R series drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has two 3⅛ inch spiral flutes, straight shank with three flats, right hand cutting direction, and a 135 Degrees split point.
This mechanics length drill bit is made of high speed steel and has a 15/32 inch diameter, 1⅝ inch long shank. It is for use with cast iron, steel, cast iron, and meets ASME standards. This 1875R series drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has two 3⅛ inch spiral flutes, straight shank with three flats, right hand cutting direction, and a 135 Degrees split point.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
Mechanics length drill bits. 135 degree split point for faster, easier drill penetration. Black and gold finish. Sizes above 11/64 inch have three flats for tighter chucking.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.