Stainless Steel Compression Tube Fittings for Hydraulics

This Ferulok series male connector meets the standards for SAE J514, has a length of 1 7/16 inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 13/16 inch hex size.

This Ferulok series male connector meets the standards for SAE J514, has a length of 1 7/16 inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 13/16 inch hex size.

This Ferulok series male elbow meets the standards for SAE J514, has a length of 1 1/16 inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This Ferulok series male elbow meets the standards for SAE J514, has a length of 1 1/16 inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1⅛ inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅝ inch hex size.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1⅛ inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅝ inch hex size.

This Seal-Lok series cap meets the standards for SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: gases, oils. It has an operating temperature of 30 Degrees F to 250 Degrees F and is resistant to over torque, vibration and is made of 316-grade stainless steel. In addition, it is a cap, with an imperial system of measurement, and 9/16"-18 thread. Plus, it has a O-Ring Face Seal connection type.

This Seal-Lok series cap meets the standards for SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: gases, oils. It has an operating temperature of 30 Degrees F to 250 Degrees F and is resistant to over torque, vibration and is made of 316-grade stainless steel. In addition, it is a cap, with an imperial system of measurement, and 9/16"-18 thread. Plus, it has a O-Ring Face Seal connection type.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1 9/32 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅞ inch hex size.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1 9/32 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅞ inch hex size.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1 7/32 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1 7/32 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This Ferulok series union elbow meets the standards for SAE J514, has a length of 1 1/16 inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a 90 Degrees elbow, with an imperial system of measurement.

This Ferulok series union elbow meets the standards for SAE J514, has a length of 1 1/16 inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a 90 Degrees elbow, with an imperial system of measurement.

This Ferulok series female connector meets the standards for SAE J514, has a length of 1 25/32 inch, a maximum operating pressure of 4,500 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 1⅛ inch hex size.

This Ferulok series female connector meets the standards for SAE J514, has a length of 1 25/32 inch, a maximum operating pressure of 4,500 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 1⅛ inch hex size.

This Ferulok series nut meets the standards for SAE J1453, has a length of 11/16 inch, and is designed for the following applications: fluids, gases. It has an operating temperature of 30 Degrees F to 250 Degrees F, and is made of 316-grade stainless steel. In addition, it is a nut, with an imperial system of measurement, and 11/16"-16 thread. Plus, it has a compression connection type and 13/16 inch hex size.

This Ferulok series nut meets the standards for SAE J1453, has a length of 11/16 inch, and is designed for the following applications: fluids, gases. It has an operating temperature of 30 Degrees F to 250 Degrees F, and is made of 316-grade stainless steel. In addition, it is a nut, with an imperial system of measurement, and 11/16"-16 thread. Plus, it has a compression connection type and 13/16 inch hex size.

This Ferulok series male elbow meets the standards for SAE J514, has a length of 1⅛ inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This Ferulok series male elbow meets the standards for SAE J514, has a length of 1⅛ inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This Ferulok series male connector meets the standards for SAE J514, has a length of 1 11/32 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅝ inch hex size.

This Ferulok series male connector meets the standards for SAE J514, has a length of 1 11/32 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅝ inch hex size.

This Ferulok series male connector meets the standards for SAE J514, has a length of 1 5/16 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This Ferulok series male connector meets the standards for SAE J514, has a length of 1 5/16 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This Ferulok series union meets the standards for SAE J514, has a length of 1¼ inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight connector, with an imperial system of measurement. Plus, it has a ⅝ inch hex size.

This Ferulok series union meets the standards for SAE J514, has a length of 1¼ inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight connector, with an imperial system of measurement. Plus, it has a ⅝ inch hex size.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1⅜ inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅞ inch hex size.

This Ferulok series straight thread connector meets the standards for SAE J514, has a length of 1⅜ inch, a maximum operating pressure of 5,000 psi and is designed for the following applications: gases, hydraulic fluids. It has an operating temperature of 425 Degrees F to 1,200 Degrees F, and is made of 316-grade stainless steel. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a ⅞ inch hex size.