Product ITEM is unavailable. See products from the same category below.
Quick-Change Sanding Discs
Quick-change sanding discs remove rust and paint, clean and level welds, and prepare them for final finishing. They attach to a compatible quick-change backing pad or mandrel to reduce the time it takes to refresh a disc or change grits. Quick-change discs can be removed and reapplied so they're a good choice for applications where the disc is changed out before fully worn.
This quick-change sanding disc has 50 grit ceramic abrasive with aluminum oxide minerals and heavy YF-cloth or fibre backing. It is the best choice for use on stainless steel. This 1 1/2-inch diameter sanding disc can withstand a maximum rotation speed of 30,000 RPM.
This quick-change sanding disc has 50 grit ceramic abrasive with aluminum oxide minerals and heavy YF-cloth or fibre backing. It is the best choice for use on stainless steel. This 1 1/2-inch diameter sanding disc can withstand a maximum rotation speed of 30,000 RPM.
With its 60 grit ceramic abrasive with aluminum oxide minerals and heavy YF-cloth or fibre backing, this quick-change sanding disc is the best choice for use on stainless steel. It is 1 1/2 inches in diameter and can withstand a maximum rotation speed of 30,000 RPM.
With its 60 grit ceramic abrasive with aluminum oxide minerals and heavy YF-cloth or fibre backing, this quick-change sanding disc is the best choice for use on stainless steel. It is 1 1/2 inches in diameter and can withstand a maximum rotation speed of 30,000 RPM.
This P180 grit quick-change sanding disc is two inches in diameter sanding and has an aluminum oxide abrasive with YF-weight polyester backing that is water-resistant. This roll-on disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can be run wet or dry and is resin-bonded for heat resistance. This sanding disc can withstand grinding speeds up to 25,000 RPM.
This P180 grit quick-change sanding disc is two inches in diameter sanding and has an aluminum oxide abrasive with YF-weight polyester backing that is water-resistant. This roll-on disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can be run wet or dry and is resin-bonded for heat resistance. This sanding disc can withstand grinding speeds up to 25,000 RPM.
3M(TM) Roloc(TM) Cloth Disc 361F is an aluminum oxide Roloc(TM) disc constructed on a YF weight, water resistant polyester cloth backing. Resin bonded for heat resistance. Can be run wet or dry. Primary markets: Metalworking, MRO and Welding.
3M(TM) Roloc(TM) Cloth Disc 361F is an aluminum oxide Roloc(TM) disc constructed on a YF weight, water resistant polyester cloth backing. Resin bonded for heat resistance. Can be run wet or dry. Primary markets: Metalworking, MRO and Welding.
This green-coloured, quick-change sanding disc is ideal for using to deburr, blend, die polish, and finish any type of metal surface. It is two inches in diameter and has heavy-duty YT weight cloth backing with 50 grit aluminum oxide abrasive. This roll-on sanding disc can withstand grinding speeds up to 20,000 rotations per minute.
This green-coloured, quick-change sanding disc is ideal for using to deburr, blend, die polish, and finish any type of metal surface. It is two inches in diameter and has heavy-duty YT weight cloth backing with 50 grit aluminum oxide abrasive. This roll-on sanding disc can withstand grinding speeds up to 20,000 rotations per minute.
This 100 grit, quick-change sanding disc has heavy YF-cloth or fibre backing and should be used on stainless steel for best results. This two-inch diameter sanding wheel can withstand a maximum rotation speed of 25,000 RPM. It has ceramic abrasive with aluminum oxide minerals.
This 100 grit, quick-change sanding disc has heavy YF-cloth or fibre backing and should be used on stainless steel for best results. This two-inch diameter sanding wheel can withstand a maximum rotation speed of 25,000 RPM. It has ceramic abrasive with aluminum oxide minerals.
This 1 1/2 inch diameter sanding disc can withstand a maximum grinding speed of 30,000 RPM. It has 60+ grit abrasive and has a quick-change design for greater convenience.
This 1 1/2 inch diameter sanding disc can withstand a maximum grinding speed of 30,000 RPM. It has 60+ grit abrasive and has a quick-change design for greater convenience.
With its high-quality P240 grit aluminum oxide abrasive, this quick-change sanding disc can be run wet or dry. It is 1 1/2 inches in diameter and has durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. This roll-on sanding disc can withstand grinding speeds up to 30,000 RPM. It is ideal for use in maintenance, repairs, operations, welding, and metalworking.
With its high-quality P240 grit aluminum oxide abrasive, this quick-change sanding disc can be run wet or dry. It is 1 1/2 inches in diameter and has durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. This roll-on sanding disc can withstand grinding speeds up to 30,000 RPM. It is ideal for use in maintenance, repairs, operations, welding, and metalworking.
This one-inch diameter quick-change sanding disc can withstand grinding speeds up to 30,000 RPM. It has P100 grit abrasive and YF-weight polyester backing that is water-resistant. This roll-on disc has an aluminum oxide abrasive and can be run wet or dry. It is resin-bonded for heat resistance. This sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations.
This one-inch diameter quick-change sanding disc can withstand grinding speeds up to 30,000 RPM. It has P100 grit abrasive and YF-weight polyester backing that is water-resistant. This roll-on disc has an aluminum oxide abrasive and can be run wet or dry. It is resin-bonded for heat resistance. This sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations.
This P150 grit quick-change sanding disc is two inches in diameter sanding and has an aluminum oxide abrasive. This roll-on disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can be run wet or dry and is resin-bonded for heat resistance. This sanding disc has YF-weight polyester backing that is water-resistant and can withstand grinding speeds up to 25,000 RPM.
This P150 grit quick-change sanding disc is two inches in diameter sanding and has an aluminum oxide abrasive. This roll-on disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can be run wet or dry and is resin-bonded for heat resistance. This sanding disc has YF-weight polyester backing that is water-resistant and can withstand grinding speeds up to 25,000 RPM.
This quick-change sanding disc has 80 grit aluminum oxide abrasive with durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. Perfect for use in welding, metalworking, maintenance, repairs, and operations, this roll-on sanding disc and can withstand grinding speeds up to 30,000 RPM. It can be run wet or dry. This sanding disc is 1 1/2 inches in diameter.
This quick-change sanding disc has 80 grit aluminum oxide abrasive with durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. Perfect for use in welding, metalworking, maintenance, repairs, and operations, this roll-on sanding disc and can withstand grinding speeds up to 30,000 RPM. It can be run wet or dry. This sanding disc is 1 1/2 inches in diameter.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
