Potable Water & Food Processing Push-to-Connect Tube Fittings

Connecting 1 1/4 inch 37 Degrees flare JIC into 1 5/8"-12 thread UN/UNF-2A pipe thread, this bulkhead union adapter matches part 20 WLN. The body comes with locknut, and is designed for use in all hydraulic fluid applications. Both ends measure the same.

Connecting 1 1/4 inch 37 Degrees flare JIC into 1 5/8"-12 thread UN/UNF-2A pipe thread, this bulkhead union adapter matches part 20 WLN. The body comes with locknut, and is designed for use in all hydraulic fluid applications. Both ends measure the same.

This hydraulic tube fitting meets the standards for DIN, ISO 8434, has a maximum operating pressure of 630 psi @ 70 Degrees F and is made of steel.

This hydraulic tube fitting meets the standards for DIN, ISO 8434, has a maximum operating pressure of 630 psi @ 70 Degrees F and is made of steel.

This ermeto tube to tube high pressure hydraulic tube fitting meets the standards for DIN Standard, has a maximum operating pressure of 420 bar and is designed for the following applications: hydraulic. It is made of steel. This ermeto tube to tube high pressure hydraulic tube fitting includes a seal.

This ermeto tube to tube high pressure hydraulic tube fitting meets the standards for DIN Standard, has a maximum operating pressure of 420 bar and is designed for the following applications: hydraulic. It is made of steel. This ermeto tube to tube high pressure hydraulic tube fitting includes a seal.

This union tee, with all three ends equal, has 7/8" 37 Degrees JIC flare fitting into 1 3/16"-12 thread UN/UNF-2A at all three points, and is used in hydraulic fluid environments.

This union tee, with all three ends equal, has 7/8" 37 Degrees JIC flare fitting into 1 3/16"-12 thread UN/UNF-2A at all three points, and is used in hydraulic fluid environments.

This pipe fitting and port adapter meets the standards for ASTM B117/ISO 9227, ISO 6149, SAE, has a length of 36.7 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 27 mm hex size.

This pipe fitting and port adapter meets the standards for ASTM B117/ISO 9227, ISO 6149, SAE, has a length of 36.7 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 27 mm hex size.

This durometer O-ring meets the standards for MIL/Aero, MIL-G-21569B Class I, and UL, has a maximum operating pressure of 4,000 psi @ 70 Degrees F and is made of rubber.

This durometer O-ring meets the standards for MIL/Aero, MIL-G-21569B Class I, and UL, has a maximum operating pressure of 4,000 psi @ 70 Degrees F and is made of rubber.

This bulkhead union meets the standards for FDA, NSF/ANSI 51, NSF/ANSI 61, has a length of 2¼ inch, a maximum operating pressure of 230 psi and is designed for the following applications: beverages, carbon dioxide, food processing, potable water, vacuum. It is white, has an operating temperature of 35 Degrees F to 200 Degrees F and is resistant to chemical, mechanical and is made of nylon. In addition, it is a straight bulkhead union, with an imperial system of measurement.

This bulkhead union meets the standards for FDA, NSF/ANSI 51, NSF/ANSI 61, has a length of 2¼ inch, a maximum operating pressure of 230 psi and is designed for the following applications: beverages, carbon dioxide, food processing, potable water, vacuum. It is white, has an operating temperature of 35 Degrees F to 200 Degrees F and is resistant to chemical, mechanical and is made of nylon. In addition, it is a straight bulkhead union, with an imperial system of measurement.

This swivel elbow meets the standards for FDA, NSF/ANSI 51, NSF/ANSI 61, has a length of 1 3/32 inch, a maximum operating pressure of 230 psi and is designed for the following applications: beverages, carbon dioxide, food processing, potable water, vacuum. It is white, has an operating temperature of 35 Degrees F to 200 Degrees F and is resistant to chemical, mechanical and is made of nylon. In addition, it is a 90 Degrees swivel elbow, with an imperial system of measurement, and ¼" thread.

This swivel elbow meets the standards for FDA, NSF/ANSI 51, NSF/ANSI 61, has a length of 1 3/32 inch, a maximum operating pressure of 230 psi and is designed for the following applications: beverages, carbon dioxide, food processing, potable water, vacuum. It is white, has an operating temperature of 35 Degrees F to 200 Degrees F and is resistant to chemical, mechanical and is made of nylon. In addition, it is a 90 Degrees swivel elbow, with an imperial system of measurement, and ¼" thread.

This hydraulic tube fitting meets the standards for DIN, ISO 8434, has a maximum operating pressure of 630 psi @ 70 Degrees F and is made of steel.

This hydraulic tube fitting meets the standards for DIN, ISO 8434, has a maximum operating pressure of 630 psi @ 70 Degrees F and is made of steel.

This carbon steel hydraulic hose tube adapter has a swivel, union flare end male connection style with a 37 degree 9/16"18 thread and a 90-degree elbow. With a Chromium-6 free, zinc trivalent chromate finish and has a working pressure of 3000 psi it is a solid choice for your next heavy duty project.

This carbon steel hydraulic hose tube adapter has a swivel, union flare end male connection style with a 37 degree 9/16"18 thread and a 90-degree elbow. With a Chromium-6 free, zinc trivalent chromate finish and has a working pressure of 3000 psi it is a solid choice for your next heavy duty project.

Designed for connection with SAE straight thread port, incorporating SAE straight thread O-ring port studs, 7/8"-14 thread with a 1" hex. Made from cold dawn barstock.

Designed for connection with SAE straight thread port, incorporating SAE straight thread O-ring port studs, 7/8"-14 thread with a 1" hex. Made from cold dawn barstock.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 1.62 inch, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ¾"-16 thread. Plus, it has a 1 inch hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 1.62 inch, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ¾"-16 thread. Plus, it has a 1 inch hex size.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 1.93 inch, a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 1½ inch hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 1.93 inch, a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 1½ inch hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 2.76 inch, a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 13/16 inch hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 2.76 inch, a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 13/16 inch hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 49.5 mm, a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 41 mm hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 49.5 mm, a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 41 mm hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

For union tube connections requiring 1/2" 37 Degrees JIC flare into 3/4"-16 thread UN/UNF-2A at both ends in hydraulic operations. Made from stainless steel.

For union tube connections requiring 1/2" 37 Degrees JIC flare into 3/4"-16 thread UN/UNF-2A at both ends in hydraulic operations. Made from stainless steel.