Product ITEM is unavailable. See products from the same category below.
Mechanics- & Riggers-Style General Purpose Gloves
Mechanics- and riggers-style gloves protect hands from dirt, grime, scrapes, and blisters. They have good dexterity and tactility and are often worn when performing basic tasks in general maintenance and repair operations, including handling boxes, stocking warehouses, performing carpentry work, and working on cars and machinery.
These blue Mechanix Wear The Original MG-03 mechanics gloves are size large and are made with tricot synthetic leather, TPR, and TrekDry. In addition, they have nylon stitching, and a wing thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a hook-and-loop cuff, and an EN 388 Rating of 3121X. They feature an ID panel, pull straps, reinforced thumb crotch, and touchscreen compatibility.
These blue Mechanix Wear The Original MG-03 mechanics gloves are size large and are made with tricot synthetic leather, TPR, and TrekDry. In addition, they have nylon stitching, and a wing thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a hook-and-loop cuff, and an EN 388 Rating of 3121X. They feature an ID panel, pull straps, reinforced thumb crotch, and touchscreen compatibility.
These red Mechanix Wear The Original MG-02 mechanics gloves are size X-large and are made with tricot synthetic leather, TPR, and TrekDry. In addition, they have nylon stitching, and a wing thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a hook-and-loop cuff, and an EN 388 Rating of 3121X. They feature an ID panel, pull straps, reinforced thumb crotch, and touchscreen compatibility.
These red Mechanix Wear The Original MG-02 mechanics gloves are size X-large and are made with tricot synthetic leather, TPR, and TrekDry. In addition, they have nylon stitching, and a wing thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a hook-and-loop cuff, and an EN 388 Rating of 3121X. They feature an ID panel, pull straps, reinforced thumb crotch, and touchscreen compatibility.
These X-large black FastFit gloves have a one-piece simulated leather palm (84 percent polyester/16 percent polyurethane). These gloves have a back material made of TrekDry, elastic cuff, full-finger style, and 100 percent polyester lining.
These X-large black FastFit gloves have a one-piece simulated leather palm (84 percent polyester/16 percent polyurethane). These gloves have a back material made of TrekDry, elastic cuff, full-finger style, and 100 percent polyester lining.
High visibility lime-yellow stretch knit spandex back. 3M(TM) reflective ink for increased visibility. Impact adsorbing, molded rubber protection is extended to reduce pinched points at fingertips. Molded, embossed neoprene cuff forms and protects perfectly around wrist. EVA high profile, deep ribbed accordion knuckle padding. Sure Grip fingertips. Anatomically cut and shaped EVA foam palm pads. 100% washable.
High visibility lime-yellow stretch knit spandex back. 3M(TM) reflective ink for increased visibility. Impact adsorbing, molded rubber protection is extended to reduce pinched points at fingertips. Molded, embossed neoprene cuff forms and protects perfectly around wrist. EVA high profile, deep ribbed accordion knuckle padding. Sure Grip fingertips. Anatomically cut and shaped EVA foam palm pads. 100% washable.
These cut-resistant gloves come in size large/nine and measure 10 inches in length. They are clute cut, uncoated, and are made of synthetic leather. These high-visibility yellow and black gloves meet ANSI level four standards.
These cut-resistant gloves come in size large/nine and measure 10 inches in length. They are clute cut, uncoated, and are made of synthetic leather. These high-visibility yellow and black gloves meet ANSI level four standards.
These yellow Mechanix Wear hi-vis Original SMG-X91 mechanics gloves are size small and are made with HPPE, synthetic leather, TPR, and TrekDry. In addition, they are uncoated with a wing thumb style. They are rated ANSI/ISEA Cut Level A4 /ANSI/ISEA Puncture Level 3. They are full-finger, have a hook-and-loop cuff, and an EN 388 Rating of 4X43D. They feature breathable back, pull strap, reflective backing, reinforced thumb crotch, touchscreen compatible.
These yellow Mechanix Wear hi-vis Original SMG-X91 mechanics gloves are size small and are made with HPPE, synthetic leather, TPR, and TrekDry. In addition, they are uncoated with a wing thumb style. They are rated ANSI/ISEA Cut Level A4 /ANSI/ISEA Puncture Level 3. They are full-finger, have a hook-and-loop cuff, and an EN 388 Rating of 4X43D. They feature breathable back, pull strap, reflective backing, reinforced thumb crotch, touchscreen compatible.
These cut-resistant gloves come in size XXL/11 and measure 10 inches in length. They are clute cut, uncoated, and are made of synthetic leather. These high-visibility yellow and black gloves meet ANSI level four standards.
These cut-resistant gloves come in size XXL/11 and measure 10 inches in length. They are clute cut, uncoated, and are made of synthetic leather. These high-visibility yellow and black gloves meet ANSI level four standards.
These beige/black Mechanix Wear HRL-05 mechanics gloves are size small and are made with Kovenex, goatskin leather, and Kevlar. In addition, they have Kevlar stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 2. They are full-finger, have a shirred slip-on cuff, and a max temp of 600 Degrees F. They feature an ID panel.
These beige/black Mechanix Wear HRL-05 mechanics gloves are size small and are made with Kovenex, goatskin leather, and Kevlar. In addition, they have Kevlar stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 2. They are full-finger, have a shirred slip-on cuff, and a max temp of 600 Degrees F. They feature an ID panel.
These full-thumb grip gloves are size XX-large, come in black and grey, and have Armortex reinforced finger style. The palm is made from Armortex, the back material is form-fitting TrekDry, and the stitching is polyester thread, with a TPR hook-and-loop-cuff and wide-fit closure.
These full-thumb grip gloves are size XX-large, come in black and grey, and have Armortex reinforced finger style. The palm is made from Armortex, the back material is form-fitting TrekDry, and the stitching is polyester thread, with a TPR hook-and-loop-cuff and wide-fit closure.
These brown Mechanix Wear MF4X-75 mechanics gloves are size small and are made with synthetic leather, TekDry, Tricot, and nylon. In addition, they have nylon stitching, and straight thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a shirred slip-on cuff, and an EN 388 Rating of 4131X. They feature a breathable back, and an ID panel.
These brown Mechanix Wear MF4X-75 mechanics gloves are size small and are made with synthetic leather, TekDry, Tricot, and nylon. In addition, they have nylon stitching, and straight thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a shirred slip-on cuff, and an EN 388 Rating of 4131X. They feature a breathable back, and an ID panel.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
