Product ITEM is unavailable. See products from the same category below.
Leather Cold-Condition Insulated Gloves & Mitts
Leather cold-condition gloves and mitts are insulated to keep hands warm in cold environments. Insulation and material thickness affect overall warmth and dexterity of the glove, with thicker gloves being less dexterous than thinner gloves. Liners, outer layers, and coatings improve wind and water resistance.
These cut-resistant, size small gloves provide durable excellence due to their cowhide fabric. The uncoated finish delivers a remarkable grip with every hold on these gunn-cut, heat protected gloves. Measuring at 13-inches in length, these high coverage are unquestionably sustainable.
These cut-resistant, size small gloves provide durable excellence due to their cowhide fabric. The uncoated finish delivers a remarkable grip with every hold on these gunn-cut, heat protected gloves. Measuring at 13-inches in length, these high coverage are unquestionably sustainable.
These Van Goat cut-resistant gloves are XX-large/11 and measure 13 inches in length. These red and white gloves are uncoated, have goatskin palms, and are gunn cut. They are ANSI cut level A5, ANSI puncture level five, ANSI puncture force 150, ANSI abrasion cycle 1000, ANSI abrasion level three, and can withstand a cutting load of up to 2200 grams.
These Van Goat cut-resistant gloves are XX-large/11 and measure 13 inches in length. These red and white gloves are uncoated, have goatskin palms, and are gunn cut. They are ANSI cut level A5, ANSI puncture level five, ANSI puncture force 150, ANSI abrasion cycle 1000, ANSI abrasion level three, and can withstand a cutting load of up to 2200 grams.
These Shock Trooper cut-resistant gloves are medium/eight and measure 12 inches in length. They are uncoated and the palms are made of foam-padded full-grain goatskin. These brown and black gloves are gunn cut. They are ANSI cut level A7, ANSI puncture level four, ANSI puncture force 1000, ANSI abrasion cycle 3000, and can withstand a cutting load of up to 4000 grams.
These Shock Trooper cut-resistant gloves are medium/eight and measure 12 inches in length. They are uncoated and the palms are made of foam-padded full-grain goatskin. These brown and black gloves are gunn cut. They are ANSI cut level A7, ANSI puncture level four, ANSI puncture force 1000, ANSI abrasion cycle 3000, and can withstand a cutting load of up to 4000 grams.
Protect your hands with these water-resistant mitts. Made from deerskin, cowhide, and TPR, these 14-inch mitts have a Thinsulate(TM) lining for warmth and a gauntlet cuff for wrist protection. These black and tan mitts have a straight thumb and are size large.
Protect your hands with these water-resistant mitts. Made from deerskin, cowhide, and TPR, these 14-inch mitts have a Thinsulate(TM) lining for warmth and a gauntlet cuff for wrist protection. These black and tan mitts have a straight thumb and are size large.
These tan 95782 Storm Trooper gloves are size small 7. They feature water- and oil-resistance and impact protection. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These tan 95782 Storm Trooper gloves are size small 7. They feature water- and oil-resistance and impact protection. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These off-white/yellow Puff Daddy gloves are size large 9. They feature full leather index fingers, palm patch and hooded fingers. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These off-white/yellow Puff Daddy gloves are size large 9. They feature full leather index fingers, palm patch and hooded fingers. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These Off white, yellow polyurethaneff daddy gloves are size X-large 9. They feature full leather index fingers, palm patch, hooded fing Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These Off white, yellow polyurethaneff daddy gloves are size X-large 9. They feature full leather index fingers, palm patch, hooded fing Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These amber Expedition North cold Protection gloves are size medium 8. They feature strength and durability, and water-resistance. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These amber Expedition North cold Protection gloves are size medium 8. They feature strength and durability, and water-resistance. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These impact-resistant, size large/nine, black and brown anti-vibration gloves have an ANSI cut level rating of A7, a reinforced finger style, and an open gauntlet cuff. They are made from goatskin both in the palm and glove back, and have impact resistant D30 construction, TPR knuckle padding, EVA Foam patches, and a Cut Shield lining.
These impact-resistant, size large/nine, black and brown anti-vibration gloves have an ANSI cut level rating of A7, a reinforced finger style, and an open gauntlet cuff. They are made from goatskin both in the palm and glove back, and have impact resistant D30 construction, TPR knuckle padding, EVA Foam patches, and a Cut Shield lining.
Utilize these leather gloves for sustainable, abrasion-resistant, long term wear. Derived from cowhide leather, these comfortable amber coloured gloves are 11-inches in length and include a durably fitted wrist area for secured hand protection. Medium in size, these gunn-cut gloves are remarkably flexible.
Utilize these leather gloves for sustainable, abrasion-resistant, long term wear. Derived from cowhide leather, these comfortable amber coloured gloves are 11-inches in length and include a durably fitted wrist area for secured hand protection. Medium in size, these gunn-cut gloves are remarkably flexible.
These cowhide gloves in size X-large come with wing thumbs for ease of movement. Gauntlet cuffs protect your arms from abrasions. These 12-inch yellow gloves come in a pair.
These cowhide gloves in size X-large come with wing thumbs for ease of movement. Gauntlet cuffs protect your arms from abrasions. These 12-inch yellow gloves come in a pair.
These Shock Trooper cut-resistant gloves are X-small/six and measure 12 inches in length. They are uncoated and the palms are made of foam-padded full-grain goatskin. These brown and black gloves are gunn cut. They are ANSI cut level A7, ANSI puncture level four, ANSI puncture force 1000, ANSI abrasion cycle 3000, and can withstand a cutting load of up to 4000 grams.
These Shock Trooper cut-resistant gloves are X-small/six and measure 12 inches in length. They are uncoated and the palms are made of foam-padded full-grain goatskin. These brown and black gloves are gunn cut. They are ANSI cut level A7, ANSI puncture level four, ANSI puncture force 1000, ANSI abrasion cycle 3000, and can withstand a cutting load of up to 4000 grams.
These deerskin gloves are uncoated and come with slip-on cuffs. They have inset thumbs. These yellow, size medium gloves are eight inches long and come in a pair.
These deerskin gloves are uncoated and come with slip-on cuffs. They have inset thumbs. These yellow, size medium gloves are eight inches long and come in a pair.
These black and tan Flextime work gloves are size large. They feature Eco-Thinsulate made with 78% post-consumer recycled material. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These black and tan Flextime work gloves are size large. They feature Eco-Thinsulate made with 78% post-consumer recycled material. Leather gloves and mitts protect hands from minor abrasions/cuts plus incidental contact with heat/sparks. They resist wear, provide dexterity, and are often used in construction, carpentry, and general maintenance.
These impact-resistant, size XX-large/11, black and brown anti-vibration gloves have an ANSI cut level rating of A7, a reinforced finger style, and an open gauntlet cuff. They are made from goatskin both in the palm and glove back, and have impact resistant D30 construction, TPR knuckle padding, EVA Foam patches, and a Cut Shield lining.
These impact-resistant, size XX-large/11, black and brown anti-vibration gloves have an ANSI cut level rating of A7, a reinforced finger style, and an open gauntlet cuff. They are made from goatskin both in the palm and glove back, and have impact resistant D30 construction, TPR knuckle padding, EVA Foam patches, and a Cut Shield lining.
These impact-resistant, size X-small/six, black and brown anti-vibration gloves have an ANSI cut level rating of A7, a reinforced finger style, and an open gauntlet cuff. They are made from goatskin both in the palm and glove back, and have impact resistant D30 construction, TPR knuckle padding, EVA Foam patches, and a Cut Shield lining.
These impact-resistant, size X-small/six, black and brown anti-vibration gloves have an ANSI cut level rating of A7, a reinforced finger style, and an open gauntlet cuff. They are made from goatskin both in the palm and glove back, and have impact resistant D30 construction, TPR knuckle padding, EVA Foam patches, and a Cut Shield lining.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
