High-Speed Steel Straight-Flute Hand Taps

High speed steel ground thread taper fractional hand tap. Most versatile taps for hand use for tapping under power. Popular for use in general machine tapping or CNC tapping. Appropriate for tapping the vast majority of materials.

High speed steel ground thread taper fractional hand tap. Most versatile taps for hand use for tapping under power. Popular for use in general machine tapping or CNC tapping. Appropriate for tapping the vast majority of materials.

This straight flute tap is made of high speed steel and has a 0.697 inch diameter, 2.4700 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4-11/16 inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.697 inch diameter, 2.4700 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4-11/16 inch length. Plus it has four flutes and a straight shank.

This extension spiral point tap is made of vanadium high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is for use with steel, and meets the standards for USCTI, ANSI, USCTI. This 5305(EXT)/5303(EXT) series extension spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has four flutes and a straight shank.

This extension spiral point tap is made of vanadium high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is for use with steel, and meets the standards for USCTI, ANSI, USCTI. This 5305(EXT)/5303(EXT) series extension spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.318 inch diameter, 1.5900 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.318 inch diameter, 1.5900 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.141 inch diameter, 1.3200 inch long shank. It is designed for use with steel, and meets ANSI standards 302. This 5305/2305 series straight flute tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has three flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.141 inch diameter, 1.3200 inch long shank. It is designed for use with steel, and meets ANSI standards 302. This 5305/2305 series straight flute tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has three flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 13.70mm diameter, 2.4400 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7353 series straight flute tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 102mm length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 13.70mm diameter, 2.4400 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7353 series straight flute tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 102mm length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 6.50mm diameter shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for ANSI, USCTI. This 2353 series straight flute tap has a TiN finish, and has metric measurements. It has right hand direction with a 64 mm length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 6.50mm diameter shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for ANSI, USCTI. This 2353 series straight flute tap has a TiN finish, and has metric measurements. It has right hand direction with a 64 mm length. Plus it has four flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.367 inch diameter, 1.7200 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5303/2303 series hand tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.367 inch diameter, 1.7200 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5303/2303 series hand tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.141 inch diameter, 1-5/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has three flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.141 inch diameter, 1-5/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has three flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.220 inch diameter, 1-7/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.220 inch diameter, 1-7/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.168 inch diameter, 1.3800 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5305/2305 series straight flute tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.168 inch diameter, 1.3800 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5305/2305 series straight flute tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.318 inch diameter, 1.5900 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.318 inch diameter, 1.5900 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This extension spiral point tap is made of vanadium high speed steel and has a 0.168 inch diameter, 1.3800 inch long shank. It is for use with steel, and meets the standards for USCTI, ANSI. This 5305(EXT)/5303(EXT) series extension spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has four flutes and a straight shank.

This extension spiral point tap is made of vanadium high speed steel and has a 0.168 inch diameter, 1.3800 inch long shank. It is for use with steel, and meets the standards for USCTI, ANSI. This 5305(EXT)/5303(EXT) series extension spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has four flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.381 inch diameter, 1.6900 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5303/2303 series hand tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.381 inch diameter, 1.6900 inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5303/2303 series hand tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.

This straight flute hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3100 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets the standards for USCTI 302, ANSI. This 5305/2305 series straight flute hand tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.

This straight flute hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3100 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets the standards for USCTI 302, ANSI. This 5305/2305 series straight flute hand tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.

This straight flute hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3100 inch long shank. It is for use with steel, and meets the standards for USCTI 302, ANSI. This 5305 series straight flute hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has three flutes and a straight shank.

This straight flute hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3100 inch long shank. It is for use with steel, and meets the standards for USCTI 302, ANSI. This 5305 series straight flute hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has three flutes and a straight shank.