Machining
Threading
Taps & Internal Threading Tools
Straight-Flute Taps
High-Speed Steel Straight-Flute Hand Taps
Close

Filter Results By

Applied Filters

Clear All

Brand
OSG

Search within these results

Shop By

New (273)

In Stock Now (10)

Brand

BRADY BRADY (1)
CLARKSON-OSBORN CLARKSON-OSBORN (331)
CLE-LINE CLE-LINE (58)
CLEVELAND CLEVELAND (379)
DRILLCO DRILLCO (39)
GREENFIELD INDUSTRIES GREENFIELD INDUSTRIES (2)
GREENFIELD THREADING (513)

NORTH AMERICAN (10)

OSG (436)

SOWA (41)

SPEEDTAPS (5)

WALTER SURFACE TECHNOLOGIES (75)

WESTWARD (51)

WIDIA GTD (480)

WIDIA-GTD (16)

WIDIA METAL REMOVAL (8)

WIDIA PRODUCTS GROUP (1)
View more View less

Price

$10 - $15 $10 - $15 (37)
$15 - $20 $15 - $20 (95)
$20 - $25 $20 - $25 (62)
$25 - $30 $25 - $30 (23)
$30 - $35 $30 - $35 (8)
$35 - $40 $35 - $40 (12)
$40 - $50 (53)

$50 - $60 (14)

$60 - $70 (14)

$70 - $80 (15)

$80 - $90 (11)

$90 - $100 (11)

$100 - $200 (51)

$200 - $300 (13)

$300 - $400 (4)

$400 - $500 (5)

$500 - $600 (4)

$600 - $700 (2)

$1000 - $1500 (2)
View more View less

Tap Chamfer

Bottoming Bottoming (175)
Plug Plug (152)
Bottoming Bottoming (13)
Taper Taper (68)
Plug Plug (15)
Taper Taper (7)

Thread Length

5/16 in 5/16 in (5)
7/16 in 7/16 in (1)
7/16 in 7/16 in (17)
1/2 in 1/2 in (3)
9/16 in 9/16 in (1)
9/16 in 9/16 in (21)
5/8 in (2)

11/16 in (1)

11/16 in (32)

3/4 in (1)

3/4 in (7)

13/16 in (25)

7/8 in (3)

7/8 in (23)

1 in (3)

15/16 in (5)

1 in (5)

1 1/16 in (8)

1 1/8 in (3)

1 1/8 in (22)

1 1/4 in (2)

1 1/4 in (11)

1 5/16 in (7)

1 7/16 in (2)

1 3/8 in (1)

1 7/16 in (4)

1 1/2 in (12)

1 21/32 in (3)

1 5/8 in (8)

1 21/32 in (9)

1 13/16 in (27)

2 in (1)

2 7/32 in (1)

2 in (6)

2 1/8 in (3)

2 7/32 in (4)

2 1/2 in (7)

9.00 mm (1)

10.00 mm (1)

11.00 mm (1)

12.00 mm (6)

13.00 mm (4)

15.00 mm (3)

16.00 mm (5)

18.00 mm (3)

19.00 mm (7)

19.05 mm (2)

20.00 mm (1)

22.00 mm (1)

22.00 mm (9)

22.22 mm (1)

24.00 mm (6)

25.00 mm (2)

25.40 mm (2)

26.00 mm (2)

27.00 mm (2)

29.00 mm (8)

30.00 mm (5)

32.00 mm (2)

31.00 mm (2)

32.00 mm (7)

34.00 mm (4)

37.00 mm (4)

38.00 mm (4)

42.00 mm (9)

42.07 mm (3)

45.00 mm (2)

46.00 mm (7)

46.04 mm (1)

51.00 mm (5)

56.00 mm (3)

60.00 mm (1)
View more View less

Thread Size

1/4"-20 1/4"-20 (26)
1/4"-20 1/4"-20 (2)
1/4"-28 1/4"-28 (7)
1/4"-28 1/4"-28 (2)
1/4"-32 1/4"-32 (2)
5/16"-18 5/16"-18 (13)
5/16"-18 (1)

5/16"-24 (6)

5/16"-24 (1)

5/16"-32 (2)

3/8"-16 (15)

3/8"-16 (1)

3/8"-24 (7)

3/8"-24 (1)

3/8"-32 (2)

7/16"-14 (4)

7/16"-20 (8)

7/16"-14 (1)

7/16"-20 (1)

7/16"-28 (2)

1/2"-13 (10)

1/2"-13 (1)

1/2"-20 (10)

1/2"-28 (2)

9/16"-12 (5)

9/16"-18 (4)

9/16"-12 (2)

9/16"-18 (2)

9/16"-24 (2)

5/8"-11 (8)

5/8"-18 (5)

5/8"-24 (2)

11/16"-24 (1)

3/4"-10 (10)

3/4"-16 (5)

3/4"-16 (1)

3/4"-20 (2)

13/16"-20 (1)

7/8"-14 (5)

7/8"-20 (1)

7/8"-9 (6)

7/8"-9 (1)

1"-12 (4)

1"-14 (4)

1"-8 (7)

1 1/8"-12 (1)

1 1/8"-7 (1)

1-1/8"-8 (1)

1 1/4"-12 (2)

1 1/4"-7 (3)

1 3/8"-6 (1)

1 3/8"-8 (2)

1 1/2"-8 (1)

2"-8 (2)

M2x0.4 (1)

M3x0.50 (3)

M4x0.7 (5)

M4x0.70 (3)

M5x0.8 (5)

M5x0.80 (3)

M5x0.80 (1)

M6x0.75 (1)

M6x1 (7)

M6x1.00 (3)

M7x1.00 (2)

M8x0.75 (1)

M8x1 (3)

M8x1.00 (2)

M8x1.25 (6)

M9x1.25 (1)

M10x1 (3)

M10x1.00 (1)

M10x1 (1)

M10x1.25 (3)

M10x1.5 (4)

M10x1.50 (3)

M10x1.25 (1)

M11x1.5 (1)

M12x1 (3)

M12x1.25 (5)

M12x1.50 (2)

M12x1.75 (6)

M12x1.50 (1)

M14x1.25 (3)

M14x1.50 (2)

M14x2.00 (3)

M16x1 (1)

M16x1.5 (2)

M16x1.50 (2)

M16x2 (3)

M16x2.00 (3)

M18x1.50 (1)

M18x2 (1)

M18x2.50 (2)

M20x1.5 (2)

M20x1.50 (2)

M20x2.5 (2)

M20x2.50 (3)

M22x1.5 (2)

M22x2.5 (1)

M24x1.5 (1)

M24x3.00 (3)

M30x1.5 (1)

M36x4 (1)

M2.5x0.45 (2)

M3.5x0.6 (1)

M4.5x0.75 (2)

#0-80 (1)

#2-56 (2)

#2-56 (1)

#3-56 (1)

#4-40 (4)

#4-40 (1)

#5-40 (1)

#5-40 (2)

#6-32 (10)

#6-40 (3)

#6-32 (1)

#8-32 (11)

#8-36 (2)

#8-32 (1)

#10-24 (12)

#10-24 (1)

#10-32 (15)

#10-32 (2)

#12-24 (4)

#12-28 (2)

#12-24 (1)

#12-32 (2)
View more View less

Tap Finish

Black Oxide Black Oxide (77)
Bright (Uncoated) Bright (Uncoated) (301)
Black Oxide Black Oxide (16)
Bright (Uncoated) Bright (Uncoated) (21)
TiCN TiCN (13)
TiN TiN (4)

Tap Material

High Speed Steel High Speed Steel (395)
High Speed Steel High Speed Steel (39)

Thread Direction

Left Hand Left Hand (26)
Right Hand Right Hand (396)

Thread Standard

JIS JIS (2)
Metric Coarse Metric Coarse (79)
Metric Fine Metric Fine (42)
Metric Coarse Metric Coarse (1)
Metric Fine Metric Fine (5)
UNC UNC (140)
UNEF (21)

UNF (74)

UNC (22)

UNS (36)

UNF (11)
View more View less

Overall Length

1 5/8 in 1 5/8 in (1)
1 3/4 in 1 3/4 in (1)
1 3/4 in 1 3/4 in (2)
1 25/32 in 1 25/32 in (1)
1 27/32 in 1 27/32 in (3)
1 7/8 in 1 7/8 in (1)
1 7/8 in (1)

1 29/32 in (1)

1 15/16 in (3)

2 in (1)

2 in (13)

2 3/32 in (8)

2 1/8 in (1)

2 1/8 in (7)

2 11/32 in (28)

2 3/8 in (5)

2 3/8 in (8)

2 1/2 in (3)

2 1/2 in (37)

2 23/32 in (2)

2 23/32 in (24)

2 15/16 in (3)

2 29/32 in (19)

2 15/16 in (8)

3 1/8 in (10)

3 5/32 in (2)

3 5/32 in (4)

3 11/32 in (18)

3 3/8 in (1)

3 3/8 in (6)

3 9/16 in (6)

3 19/32 in (2)

3 19/32 in (6)

3 25/32 in (7)

3 13/16 in (9)

4 in (1)

4 1/4 in (1)

4 1/4 in (17)

4 7/16 in (1)

4 11/16 in (1)

4 21/32 in (8)

4 11/16 in (4)

5 3/32 in (9)

5 1/8 in (6)

5 13/32 in (3)

5 3/4 in (5)

6 1/32 in (3)

6 11/32 in (1)

7 19/32 in (2)

44.00 mm (1)

46.00 mm (2)

49.00 mm (3)

50.00 mm (1)

52.00 mm (4)

53.00 mm (1)

54.00 mm (1)

60.00 mm (1)

60.00 mm (9)

62.00 mm (6)

63.00 mm (2)

64.00 mm (1)

69.00 mm (7)

70.00 mm (4)

74.00 mm (1)

72.00 mm (1)

74.00 mm (5)

75.00 mm (6)

80.00 mm (1)

82.00 mm (5)

85.00 mm (4)

86.00 mm (5)

88.00 mm (1)

91.00 mm (6)

95.00 mm (3)

96.00 mm (3)

97.00 mm (4)

100.00 mm (1)

102.00 mm (3)

105.00 mm (2)

113.00 mm (2)

115.00 mm (8)

120.00 mm (1)

125.00 mm (3)

130.00 mm (1)

154.00 mm (1)
View more View less

Thread Limit

H1 H1 (23)
H2 H2 (33)
D3 D3 (6)
H3 H3 (166)
D4 D4 (12)
H4 H4 (32)
D5 (24)

H2 (4)

H5 (14)

D6 (21)

H3 (27)

H6 (2)

D7 (14)

H4 (1)

H7 (1)

D5 (2)

D8 (3)

H5 (1)

D6 (1)

D9 (1)

JIS 2 (39)

JIS 2 (3)
View more View less

Number of Flutes

2 2 (1)
3 3 (7)
3 3 (70)
4 4 (19)
4 4 (294)
2 flutes 2 flutes (16)
6 flutes (14)
View more View less

Coolant Fed

Non-Coolant Through Non-Coolant Through (395)
Non-Coolant Through Non-Coolant Through (26)

75% Thread Drill Size

#7 #7 (26)
#21 #21 (11)
#23 #23 (4)
#25 #25 (10)
#32 #32 (3)
#7 #7 (2)
#34 (4)

#21 (3)

#36 (5)

#37 (1)

#25 (1)

#46 (3)

0.1065 in (1)

9/64 in (2)

#36 (1)

#37 (3)

5/16 in (15)

11/32 in (3)

27/64 in (10)

5/16 in (2)

11/32 in (1)

27/64 in (1)

53/64 in (3)

1.0032 in (2)

1.0438 in (1)

1.1108 in (3)

1.1688 in (2)

1.2126 in (1)

1.2532 in (2)

1.3782 in (1)

1.8782 in (2)

1.25 mm (1)

1.60 mm (1)

1.73 mm (2)

1.73 mm (1)

2.20 mm (4)

2.50 mm (3)

2.20 mm (1)

2.90 mm (1)

3.30 mm (7)

3.40 mm (7)

3.50 mm (3)

3.64 mm (1)

4.15 mm (4)

3.40 mm (1)

4.20 mm (8)

4.45 mm (4)

4.60 mm (2)

4.20 mm (1)

5.00 mm (10)

5.25 mm (1)

5.45 mm (6)

4.45 mm (1)

6.00 mm (2)

7.00 mm (5)

5.45 mm (2)

7.27 mm (1)

8.50 mm (14)

9.00 mm (2)

9.95 mm (8)

10.30 mm (6)

10.50 mm (2)

8.50 mm (1)

10.78 mm (5)

9.00 mm (1)

11.00 mm (5)

11.40 mm (10)

9.95 mm (1)

12.00 mm (3)

10.50 mm (1)

12.20 mm (5)

12.50 mm (1)

12.90 mm (4)

13.60 mm (8)

12.20 mm (2)

14.00 mm (6)

14.50 mm (9)

15.50 mm (2)

12.90 mm (2)

16.50 mm (12)

17.50 mm (10)

18.50 mm (4)

14.50 mm (1)

19.50 mm (7)

20.40 mm (5)

20.50 mm (2)

17.50 mm (1)

22.25 mm (7)

22.54 mm (1)

23.30 mm (4)

19.50 mm (1)

28.54 mm (1)

32.10 mm (1)

F (12)

H (6)

I (6)

F (2)

U (4)

I (1)

U (2)
View more View less

High-Speed Steel Straight-Flute Hand Taps

High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials. Also called hand taps, high-speed steel straight-flute taps are turned with a tap wrench to create or repair internal threads in blind holes and through holes. As the taps are rotated into a hole to create threads, the chips move into the flutes but are not evacuated.

https://catalogue.grainger.ca/?hybris=true

436 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

STRAIGHT FLUTE TAP, #5-40 THREAD SIZE, 5/16 IN THREAD L, 1 29/32 IN L, BOTTOMING, H2

OSG
STRAIGHT FLUTE TAP, #5-40 THREAD SIZE, 5/16 IN THREAD L, 1 29/32 IN L, BOTTOMING, H2
Item # OSG1013200
Mfr. Model # 1013200

EHC: EHC :

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.1860 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1-15/16 inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.1860 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1-15/16 inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.87 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, ⅜"-24 THREAD, ⅞ IN THREAD L, 2 29/32 IN L, PLUG, 4 FLUTES
Item # OSG1121601
Mfr. Model # 1121601

EHC: EHC :

This hand tap is made of high speed steel and has a 0.381 inch diameter, 1.5170 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.381 inch diameter, 1.5170 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $19.92 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, 7/16"-20 THREAD, 1 1/16 IN THREAD L, 3⅛ IN LENGTH, PLUG, H3
Item # OSG1122201
Mfr. Model # 1122201

EHC: EHC :

This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.4620 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.4620 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $33.83 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, ¼"-28 THREAD, 11/16 IN THREAD L, 2½ IN LENGTH, TAPER
Item # OSG1120300
Mfr. Model # 1120300

EHC: EHC :

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $14.67 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, ⅞"-9 THREAD, 1⅝ IN THREAD L, 4 21/32 IN LENGTH, BOTTOMING
Item # OSG1135600
Mfr. Model # 1135600

EHC: EHC :

This hand tap is made of high speed steel and has a 0.697 inch diameter, 2.18 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4-11/16 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.697 inch diameter, 2.18 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4-11/16 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $142.75 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, 9/16"-18 THREAD, 1¼ IN THREAD L, 3 9/16 IN LENGTH, BOTTOMING
Item # OSG1123501
Mfr. Model # 1123501

EHC: EHC :

This hand tap is made of high speed steel and has a 0.429 inch diameter, 1.6500 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.429 inch diameter, 1.6500 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $59.70 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, #5-40 THREAD, 5/16 IN THREAD L, 1 29/32 IN L, TAPER, 3 FLUTES

OSG
STRAIGHT FLUTE TAP, #5-40 THREAD, 5/16 IN THREAD L, 1 29/32 IN L, TAPER, 3 FLUTES
Item # OSG1013000
Mfr. Model # 1013000

EHC: EHC :

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.1860 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1-15/16 inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.1860 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1-15/16 inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $16.63 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, ¾"-16 THREAD, 1½ IN THREAD L, 4¼ IN LENGTH, PLUG, 4 FLUTES
Item # OSG1125201
Mfr. Model # 1125201

EHC: EHC :

This hand tap is made of high speed steel and has a 0.590 inch diameter, 2.0300 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.590 inch diameter, 2.0300 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $102.38 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, 5/16"-24 THREAD, 13/16 IN THREAD L, 2 23/32 IN L, PLUG, H3
Item # OSG1121001
Mfr. Model # 1121001

EHC: EHC :

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.85 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, #6-32 THREAD, 7/16 IN THREAD L, 2 IN L, BOTTOMING, RIGHT HAND

OSG
STRAIGHT FLUTE TAP, #6-32 THREAD, 7/16 IN THREAD L, 2 IN L, BOTTOMING, RIGHT HAND
Item # OSG1023800
Mfr. Model # 1023800

EHC: EHC :

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.2010 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.2010 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $14.15 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, ½"-13 THREAD, 1⅛ IN THREAD L, 3 11/32 IN LENGTH, BOTTOMING
Item # OSG1122601
Mfr. Model # 1122601

EHC: EHC :

This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.5590 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.5590 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $42.19 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, ¼"-20 THREAD, 11/16 IN THREAD L, 2½ IN LENGTH, TAPER, H3
Item # OSG1120000
Mfr. Model # 1120000

EHC: EHC :

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $15.29 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, 5/16"-18 THREAD SIZE, 13/16 IN THREAD L, 2 23/32 IN L, TAPER, H3
Item # OSG1120600
Mfr. Model # 1120600

EHC: EHC :

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $18.00 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, M10X1.25 THREAD, 22MM THREAD L, 74MM OVERALL L, PLUG

OSG
STRAIGHT FLUTE TAP, M10X1.25 THREAD, 22MM THREAD L, 74MM OVERALL L, PLUG
Item # OSG1974000
Mfr. Model # 1974000

EHC: EHC :

This pipe tap is made of high speed steel and has a 9.68 mm diameter, 39mm long shank. It is designed for use with all materials, and meets the standards for ANSI. This 141 series pipe tap has a bright (uncoated) finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2 15/16 inch length. Plus it has four flutes and a straight shank.

This pipe tap is made of high speed steel and has a 9.68 mm diameter, 39mm long shank. It is designed for use with all materials, and meets the standards for ANSI. This 141 series pipe tap has a bright (uncoated) finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2 15/16 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $42.40 / EACH

EHC: EHC :

Qty:

Compare

OSG
STRAIGHT FLUTE TAP, ¼"-28 THREAD, 11/16 IN THREAD L, 2½ IN LENGTH, PLUG, 4 FLUTES
Item # OSG1120401
Mfr. Model # 1120401

EHC: EHC :

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $14.47 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, #2-56 THREAD, ⅜ IN THREAD L, 1¾ IN LENGTH, TAPER, RIGHT HAND

OSG
STRAIGHT FLUTE TAP, #2-56 THREAD, ⅜ IN THREAD L, 1¾ IN LENGTH, TAPER, RIGHT HAND
Item # OSG1010900
Mfr. Model # 1010900

EHC: EHC :

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3130 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3130 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $25.92 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

High-Speed Steel Straight-Flute Hand Taps

436 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

High-Speed Steel Straight-Flute Hand Taps

436 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All