Product ITEM is unavailable. See products from the same category below.
Fibre Discs
Fibre discs attach to a backup pad or faceplate on an angle grinder to remove stock and rust, blend welds, debur, and prepare surfaces for finishing. The fibre backing is stronger and more tear resistant than paper and cloth. The backup pad and faceplate provide stiffness to allow even pressure to be applied to the work surface for a smoother finish.
This 9 1/2 inch diameter, quick-change fibre disc is 7/8-inch thick and can withstand a maximum rotation speed of 8,600 RPM. It is designed for use with heat-sensitive materials such as stainless steel. This disc has 60 grit ceramic grain abrasive.
This 9 1/2 inch diameter, quick-change fibre disc is 7/8-inch thick and can withstand a maximum rotation speed of 8,600 RPM. It is designed for use with heat-sensitive materials such as stainless steel. This disc has 60 grit ceramic grain abrasive.
This series 3M Precision abrasive-coated fibre sanding disc is orange and measures 7 x 7/8 inches. With 60 grit, ceramic grain, and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is orange and measures 7 x 7/8 inches. With 60 grit, ceramic grain, and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 982C extra-coarse abrasive-coated fibre sanding disc is brown and measures 5 x 7/8 inches. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design and is a complete carbon steel solution.
This series 982C extra-coarse abrasive-coated fibre sanding disc is brown and measures 5 x 7/8 inches. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design and is a complete carbon steel solution.
This quick-change fibre disc is five inches in diameter and 7/8-inch thick. It has 36 grit abrasive and is ideal to use with heat-sensitive materials, including stainless steel.
This quick-change fibre disc is five inches in diameter and 7/8-inch thick. It has 36 grit abrasive and is ideal to use with heat-sensitive materials, including stainless steel.
Engineered to wear evenly and maximize disc life, this quick-change fibre disc can withstand grinding speeds up to 12,000 RPM. It has 80 grit ceramic grain abrasive and was designed to optimize mineral breakdown. This sanding disc is ideal for most metalworking applications including work with carbon steel. It runs cool and has ultra-sharp, fast cutting points.
Engineered to wear evenly and maximize disc life, this quick-change fibre disc can withstand grinding speeds up to 12,000 RPM. It has 80 grit ceramic grain abrasive and was designed to optimize mineral breakdown. This sanding disc is ideal for most metalworking applications including work with carbon steel. It runs cool and has ultra-sharp, fast cutting points.
This seven-inch diameter, quick-change fibre disc is designed for use with heat-sensitive materials such as stainless steel. It has a 60 grit ceramic grain abrasive. This orange-coloured disc is 7/8-inch thick and can withstand a maximum rotation speed of 8,600 RPM.
This seven-inch diameter, quick-change fibre disc is designed for use with heat-sensitive materials such as stainless steel. It has a 60 grit ceramic grain abrasive. This orange-coloured disc is 7/8-inch thick and can withstand a maximum rotation speed of 8,600 RPM.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 7 x 7/8 inches. With 80 grit, ceramic grain, and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 7 x 7/8 inches. With 80 grit, ceramic grain, and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is orange and measures 4 1/2 x 7/8 inches. With 36 grit, ceramic grain, and a maximum RPM of 13,300, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is orange and measures 4 1/2 x 7/8 inches. With 36 grit, ceramic grain, and a maximum RPM of 13,300, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 5 x 7/8 inches. With 60 grit, ceramic grain, and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 5 x 7/8 inches. With 60 grit, ceramic grain, and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 5 x 7/8 inches. With 80 grit, ceramic grain, and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 5 x 7/8 inches. With 80 grit, ceramic grain, and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is orange and measures 7 x 7/8 inches. With 36 grit, ceramic grain, and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is orange and measures 7 x 7/8 inches. With 36 grit, ceramic grain, and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 5 x 7/8 inches. With 36 grit, ceramic grain, and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
This series 3M Precision abrasive-coated fibre sanding disc is maroon and measures 5 x 7/8 inches. With 36 grit, ceramic grain, and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It rapidly cuts carbon steel and is to be used with right angle grinders.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
