Extension Taps

This 917 spiral point tap is made of high speed steel and has a 0.194 inch diameter, 3⅛ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 917 series spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has two flutes.

This 917 spiral point tap is made of high speed steel and has a 0.194 inch diameter, 3⅛ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 917 series spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has two flutes.

This 397 spiral point tap is made of high speed steel and has a 0.141 inch diameter, 4 31/32 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has two flutes.

This 397 spiral point tap is made of high speed steel and has a 0.141 inch diameter, 4 31/32 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has two flutes.

This spiral flute tap is made of high speed steel and has a 0.168 inch diameter, 2 55/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.168 inch diameter, 2 55/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.194 inch diameter, 2 11/16 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.194 inch diameter, 2 11/16 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.323 inch diameter, 4 9/32 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.323 inch diameter, 4 9/32 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This tap is made of high speed steel and has a 0.318 inch diameter, 4 19/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This tap is made of high speed steel and has a 0.318 inch diameter, 4 19/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This tap is made of high speed steel and has a 0.381 inch diameter, 4⅛ inch long shank. It is designed for use with stainless steel, and meets the standards for ANSI. This 398 series tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This tap is made of high speed steel and has a 0.381 inch diameter, 4⅛ inch long shank. It is designed for use with stainless steel, and meets the standards for ANSI. This 398 series tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.141 inch diameter, 2 31/32 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.141 inch diameter, 2 31/32 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This 397 spiral point tap is made of high speed steel and has a 0.367 inch diameter, 4⅝ inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This 397 spiral point tap is made of high speed steel and has a 0.367 inch diameter, 4⅝ inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.168 inch diameter, 4 55/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.168 inch diameter, 4 55/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This tap is made of high speed steel and has a 0.367 inch diameter, 4 1/16 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This tap is made of high speed steel and has a 0.367 inch diameter, 4 1/16 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This 397 spiral point tap is made of high speed steel and has a 0.255 inch diameter, 2½ inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This 397 spiral point tap is made of high speed steel and has a 0.255 inch diameter, 2½ inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has three flutes.

This spiral flute tap is made of high speed steel and has a 0.480 inch diameter, 3 55/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length, plus it has four flutes.

This spiral flute tap is made of high speed steel and has a 0.480 inch diameter, 3 55/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 398 series spiral flute tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length, plus it has four flutes.

This 397 spiral point tap is made of high speed steel and has a 0.194 inch diameter, 4 11/16 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This 397 spiral point tap is made of high speed steel and has a 0.194 inch diameter, 4 11/16 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This 917 tap is made of high speed steel and has a 0.255 inch diameter, 4 63/64 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 917 series tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has two flutes.

This 917 tap is made of high speed steel and has a 0.255 inch diameter, 4 63/64 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 917 series tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has two flutes.

This 397 spiral point tap is made of high speed steel and has a 0.323 inch diameter, 4 45/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.

This 397 spiral point tap is made of high speed steel and has a 0.323 inch diameter, 4 45/64 inch long shank. It is designed for use with stainless steel/steel, and meets the standards for ANSI. This 397 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a six-inch length. Plus it has three flutes.