Drill & Die Grinder Radial Bristle Discs

ATB small diameter wheel brush. For cleaning and polishing both ID and OD surfaces. These brushes can be used with portable tools and drill presses.

ATB small diameter wheel brush. For cleaning and polishing both ID and OD surfaces. These brushes can be used with portable tools and drill presses.

This ATB Monarch crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures eight inches in diameter. It has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.04 inches.

This ATB Monarch crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures eight inches in diameter. It has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.04 inches.

Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.

Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.

An ATB end brush with bridle, 3/4 inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 120.

An ATB end brush with bridle, 3/4 inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 120.

Heavily filled with round nylon filaments. Filaments are impregnated with silicon carbide grit. Ideal for surface finishing and deburring. Applications: Engine blocks, cylinder heads, exhaust manifolds, transmission housings, water pumps and intake manifolds/bulk heads, wing spars, engine housings and components/hydraulic valve bodies, machine components, housings, gears and castings.

Heavily filled with round nylon filaments. Filaments are impregnated with silicon carbide grit. Ideal for surface finishing and deburring. Applications: Engine blocks, cylinder heads, exhaust manifolds, transmission housings, water pumps and intake manifolds/bulk heads, wing spars, engine housings and components/hydraulic valve bodies, machine components, housings, gears and castings.

Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.

Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.

This ATB Ringlock crimped wire wheel brush can be used for cleaning both indoor and outdoor surfaces. It measures two inches in diameter and can be arbor mounted. It has a maximum RPM of 15,000, a face width of 3/8 inches, and wire diameter of 0.024 inches. This brush is made for use with portable tools and drill presses.

This ATB Ringlock crimped wire wheel brush can be used for cleaning both indoor and outdoor surfaces. It measures two inches in diameter and can be arbor mounted. It has a maximum RPM of 15,000, a face width of 3/8 inches, and wire diameter of 0.024 inches. This brush is made for use with portable tools and drill presses.

ATB end brush. Silicon carbide fill material. Brush diaemter 1 inch. Grit 120. Trim length 1 inch. Shank diameter 1/4 inch. Maximum RPM 9,000. Total overall length 2-3/4 inches.

ATB end brush. Silicon carbide fill material. Brush diaemter 1 inch. Grit 120. Trim length 1 inch. Shank diameter 1/4 inch. Maximum RPM 9,000. Total overall length 2-3/4 inches.

An ATB end brush with bridle, one inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 80.

An ATB end brush with bridle, one inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 80.

Radial Brush, Carbon Steel, Dia. (In.) 6, Arbor Hole (In.) 5/8 In.-11, Face Width (In.) 5/8, Wire Size (In.) 0.014, Max. RPM 6,000, Trim Length (In.) 1-1/8, Brush Length (In.) 1-1/8

Radial Brush, Carbon Steel, Dia. (In.) 6, Arbor Hole (In.) 5/8 In.-11, Face Width (In.) 5/8, Wire Size (In.) 0.014, Max. RPM 6,000, Trim Length (In.) 1-1/8, Brush Length (In.) 1-1/8

This stringer bead knotted wire wheel brush measures seven inches in diameter and can be mounted with a threaded arbor. It has a maximum RPM of 12,000, a face width of 16 inches, and a wire diameter of 0.02 inches. This brush is made for use with angle grinders.

This stringer bead knotted wire wheel brush measures seven inches in diameter and can be mounted with a threaded arbor. It has a maximum RPM of 12,000, a face width of 16 inches, and a wire diameter of 0.02 inches. This brush is made for use with angle grinders.

Keep the finishing clean on your surfaces with this nylon round trim cup brush that has a threaded arbor and has a maximum RPM of 6,000. Each brush head measures six inches while the wire measures 0.022 inch in diameter.

Keep the finishing clean on your surfaces with this nylon round trim cup brush that has a threaded arbor and has a maximum RPM of 6,000. Each brush head measures six inches while the wire measures 0.022 inch in diameter.