DRUM PUMP NOZZLE,MANUAL,3/4"
DRUM PUMP NOZZLE,MANUAL,3/4"
FILL-RITE
close
close x
images.360.info.textHead1
360°
images.360.info.textHead2
- Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
- Zoom In: Double click on image.
- Zoom Out/Reset: Put photo at full zoom & then double click.
Roll over image to zoom.
Product Details
Diesel Exhaust Fluid (DEF) Air Operated Piston Pump, 8 ft hose kit for FILFRAP32V.
Technical Specs
- ItemDrum Pump Nozzle
- Inlet Size3/4 in
- Spout Connection Size3/4 in
- Spout MaterialStainless Steel
- Nozzle OperationManual
- Wetted MaterialsPolypropyene, Stainless Steel
- MeteredNo
- Compatible ChemicalsAntifreeze (Coolant), DEF, Ethylene Glycol, Glycerin, Motor Oil
- Food GradeNo
- Max. Operating Pressure50 psi
- Not Recommended ChemicalsAcetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Ammonium Hydroxide, Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Cyclohexane, Deionized Water, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Fertilizers, Formic Acid, Fresh Water, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Xylene
- Primary ColourWhite
- Inlet Type Hose Barb
- Spout Length 3 3/4 in
- Spout Discharge Size 3/4 in
- Overall Length 13 1/2 in
- Max. Fluid Temp. 120 Degrees F
- Spout Connection Type Hose Barb
- For Media Type Antifreeze, DEF, Ethylene Glycol, Glycerin, Motor Oil
- Diesel Exhaust Fluid Compatible Yes
- Includes Manual Nozzle
- Min. Fluid Temp. 15 Degrees F
- Nozzle Material Polypropylene
- Country of Origin United Kingdom
(subject to change)
