DOUBLE DIAPHRAGM PUMP, AIR, POLYPROPYLENE, BOLT, 3/8 IN FLUID CONNECTION SIZE, NPT, PTFE
DOUBLE DIAPHRAGM PUMP, AIR, POLYPROPYLENE, BOLT, 3/8 IN FLUID CONNECTION SIZE, NPT, PTFE
INGERSOLL RAND
close
close x
images.360.info.textHead1
360°
images.360.info.textHead2
- Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
- Zoom In: Double click on image.
- Zoom Out/Reset: Put photo at full zoom & then double click.
Roll over image to zoom.
Product Details
Air-operated diaphragm pump, 1/4 inch fluid ports NPT(F), santoprene diaphragm. Offers wide material compatibility (acids, alkalis, stabilizers, aliphatic solutions, polar substances, etc.), high fatigue endurance and superior abrasion resistance.
Technical Specs
- ItemDouble Diaphragm Pump
- Air Intake Connection Size1/4 in
- Check Seat MaterialPolypropylene
- Feet of Head (Maximum)230 ft
- Manifold ConnectionSingle Port
- Media Discharge Connection TypeNPTF
- Media Intake Connection Size3/8 in
- Media Intake LocationSide
- Operating Pressure (Maximum)100 psi
- Pump Assembly TypeBolt
- Valve MaterialPTFE
- Wetted Housing MaterialPolypropylene
- Chemical CompatibilityAmmonium Hydroxide, Calcium Carbonate, Diesel Exhaust Fluid, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Hydrochloric Acid 40%, Phosphoric Acid 100%, Phosphoric Acid 40%, Phosphoric Acid 50%, Phosphoric Acid 60%, Phosphoric Acid 70%, Phosphoric Acid 80%, Phosphoric Acid 90%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hydroxide 80%, Sodium Hypochlorite 10%, Sodium Hypochlorite 20%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Sulfuric Acid 50%, Sulfuric Acid 60%, Sulfuric Acid 70%, Water
- Air Intake Pressure (Maximum)100 psi
- Flow Rate @ 40 psi8 gpm
- Flow Rate @ 60 psi9.5 gpm
- Flow Rate @ 80 psi10.5 gpm
- For Use With Potable SystemsYes
- Manufacturers Warranty Length5 yr
- Mounting Hardware MaterialStainless Steel
- NPSHr35 ft of head
- Overall Length7.9 in
- Pump Operation TypeAir
- Air Consumption (Maximum) 18 scfm
- Air Intake Connection Type NPT
- Diaphragm Material PTFE
- Flow Rate (Maximum) 11 gpm
- Media Discharge Connection Size 3/8 in
- Media Discharge Location Side
- Media Intake Connection Type NPT
- Media Temperature (Maximum) 225 Degrees F
- Priming Self-Priming
- Solid Diameter (Maximum) 0.06 in
- Viscosity (Maximum) 500 cps
- Nameplate Voltage N
- Valve Type Ball
- Flow Rate @ 100 psi 11 gpm
- Flow Rate @ 50 psi 9 gpm
- Flow Rate @ 70 psi 10 gpm
- Flow Rate @ 90 psi 10.8 gpm
- Manifold Connection Type NPT
- Media Temperature (Minimum) 40 Degrees F
- Non-Wetted Housing Material Plastic
- Overall Height 9.2 in
- Overall Width 5.7 in
- Series PD03P
