Quick Change Discs

This two-inch diameter quick-change sanding disc has YF-weight polyester backing that is water-resistant. This roll-on disc has 24 grit aluminum oxide abrasive and can be run wet or dry. It is resin-bonded for heat resistance. This sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can withstand grinding speeds up to 25,000 RPM.

This two-inch diameter quick-change sanding disc has YF-weight polyester backing that is water-resistant. This roll-on disc has 24 grit aluminum oxide abrasive and can be run wet or dry. It is resin-bonded for heat resistance. This sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can withstand grinding speeds up to 25,000 RPM.

This P120 grit quick-change sanding disc can be run wet or dry. It has aluminum oxide abrasive with durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. Ideal for use in welding, metalworking, maintenance, repairs, and operations, this roll-on sanding disc and can withstand grinding speeds up to 30,000 RPM. This sanding disc is 1 1/2 inches in diameter.

This P120 grit quick-change sanding disc can be run wet or dry. It has aluminum oxide abrasive with durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. Ideal for use in welding, metalworking, maintenance, repairs, and operations, this roll-on sanding disc and can withstand grinding speeds up to 30,000 RPM. This sanding disc is 1 1/2 inches in diameter.

This sanding disc has a quick-change design for greater convenience. It can withstand a maximum grinding speed of 30,000 RPM and is 1 1/2 inches in diameter. This sanding disc has 80+ grit abrasive.

This sanding disc has a quick-change design for greater convenience. It can withstand a maximum grinding speed of 30,000 RPM and is 1 1/2 inches in diameter. This sanding disc has 80+ grit abrasive.

This three-inch diameter, quick-change sanding disc can withstand a maximum grinding speed of 25,000 RPM. It has 36+ grit abrasive.

This three-inch diameter, quick-change sanding disc can withstand a maximum grinding speed of 25,000 RPM. It has 36+ grit abrasive.

This quick-change sanding disc has heavy YF-cloth or fibre-backing. It has 120 grit ceramic abrasive with aluminum oxide minerals and for best results, it should be used on stainless steel. This white-coloured, three-inch diameter sanding wheel can withstand a maximum rotation speed of 20,000 RPM.

This quick-change sanding disc has heavy YF-cloth or fibre-backing. It has 120 grit ceramic abrasive with aluminum oxide minerals and for best results, it should be used on stainless steel. This white-coloured, three-inch diameter sanding wheel can withstand a maximum rotation speed of 20,000 RPM.

This two-inch diameter sanding disc has durable YF-weight polyester backing that resin-bonded for heat resistance as well as water-resistant. It can be run wet or dry. This sanding disc can withstand maximum grinding speeds of up to 25,000 RPM. It has high-quality 320 grit aluminum oxide abrasive. This quick-change sanding disc is ideal for use in maintenance, repairs, operations, welding, and metalworking.

This two-inch diameter sanding disc has durable YF-weight polyester backing that resin-bonded for heat resistance as well as water-resistant. It can be run wet or dry. This sanding disc can withstand maximum grinding speeds of up to 25,000 RPM. It has high-quality 320 grit aluminum oxide abrasive. This quick-change sanding disc is ideal for use in maintenance, repairs, operations, welding, and metalworking.

This black-coloured, quick-change sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It has durable YF-weight polyester backing that is water-resistant and can withstand grinding speeds up to 30,000 RPM. This roll-on sanding disc can be run wet or dry and is resin-bonded for heat resistance. It is 1 1/2 inches in diameter and has 36 grit aluminum oxide abrasive.

This black-coloured, quick-change sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It has durable YF-weight polyester backing that is water-resistant and can withstand grinding speeds up to 30,000 RPM. This roll-on sanding disc can be run wet or dry and is resin-bonded for heat resistance. It is 1 1/2 inches in diameter and has 36 grit aluminum oxide abrasive.

Use this orange-coloured 60 grit, quick-change sanding disc on stainless steel for great results. With its heavy YF-cloth or fibre backing, this three-inch diameter sanding wheel can withstand a maximum rotation speed of 20,000 RPM. It is green-coloured and has ceramic abrasive with aluminum oxide minerals.

Use this orange-coloured 60 grit, quick-change sanding disc on stainless steel for great results. With its heavy YF-cloth or fibre backing, this three-inch diameter sanding wheel can withstand a maximum rotation speed of 20,000 RPM. It is green-coloured and has ceramic abrasive with aluminum oxide minerals.

This sanding disc has durable YF-weight polyester backing that resin-bonded for heat resistance as well as water-resistant. It is three inches in diameter and can withstand maximum grinding speeds of up to 20,000 RPM. It has high-quality 320 grit aluminum oxide abrasive. This quick-change sanding disc is ideal for use in maintenance, repairs, operations, welding, and metalworking. It can be run wet or dry.

This sanding disc has durable YF-weight polyester backing that resin-bonded for heat resistance as well as water-resistant. It is three inches in diameter and can withstand maximum grinding speeds of up to 20,000 RPM. It has high-quality 320 grit aluminum oxide abrasive. This quick-change sanding disc is ideal for use in maintenance, repairs, operations, welding, and metalworking. It can be run wet or dry.

Roloc rubber back-up disc pad is female threaded to receive any standard 1/4 inch-20 thread shaft. Soft hardness, maximum RPM is 15,000.

Roloc rubber back-up disc pad is female threaded to receive any standard 1/4 inch-20 thread shaft. Soft hardness, maximum RPM is 15,000.

This one-inch diameter quick-change sanding disc can withstand grinding speeds up to 30,000 RPM. It has P100 grit abrasive and YF-weight polyester backing that is water-resistant. This roll-on disc has an aluminum oxide abrasive and can be run wet or dry. It is resin-bonded for heat resistance. This sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations.

This one-inch diameter quick-change sanding disc can withstand grinding speeds up to 30,000 RPM. It has P100 grit abrasive and YF-weight polyester backing that is water-resistant. This roll-on disc has an aluminum oxide abrasive and can be run wet or dry. It is resin-bonded for heat resistance. This sanding disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations.

This P150 grit quick-change sanding disc is two inches in diameter sanding and has an aluminum oxide abrasive. This roll-on disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can be run wet or dry and is resin-bonded for heat resistance. This sanding disc has YF-weight polyester backing that is water-resistant and can withstand grinding speeds up to 25,000 RPM.

This P150 grit quick-change sanding disc is two inches in diameter sanding and has an aluminum oxide abrasive. This roll-on disc is perfect for use in welding, metalworking, and in maintenance, repairs, and operations. It can be run wet or dry and is resin-bonded for heat resistance. This sanding disc has YF-weight polyester backing that is water-resistant and can withstand grinding speeds up to 25,000 RPM.

This quick-change sanding disc has 80 grit aluminum oxide abrasive with durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. Perfect for use in welding, metalworking, maintenance, repairs, and operations, this roll-on sanding disc and can withstand grinding speeds up to 30,000 RPM. It can be run wet or dry. This sanding disc is 1 1/2 inches in diameter.

This quick-change sanding disc has 80 grit aluminum oxide abrasive with durable YF-weight polyester backing that is water-resistant and resin-bonded for heat resistance. Perfect for use in welding, metalworking, maintenance, repairs, and operations, this roll-on sanding disc and can withstand grinding speeds up to 30,000 RPM. It can be run wet or dry. This sanding disc is 1 1/2 inches in diameter.

This two-inch diameter, quick-change sanding disc has 60 grit ceramic abrasive with aluminum oxide minerals and heavy YF-cloth or fibre backing. It is the best choice for use on stainless steel. This sanding disc is orange-coloured and can withstand a maximum rotation speed of 25,000 RPM.

This two-inch diameter, quick-change sanding disc has 60 grit ceramic abrasive with aluminum oxide minerals and heavy YF-cloth or fibre backing. It is the best choice for use on stainless steel. This sanding disc is orange-coloured and can withstand a maximum rotation speed of 25,000 RPM.

This 1 1/2-inch diameter sanding wheel can withstand a maximum rotation speed of up to 30,000 RPM. It has ceramic abrasive with aluminum oxide minerals. This 120 grit, quick-change sanding disc has heavy YF-cloth or fibre backing and, for best results, should be used on stainless steel.

This 1 1/2-inch diameter sanding wheel can withstand a maximum rotation speed of up to 30,000 RPM. It has ceramic abrasive with aluminum oxide minerals. This 120 grit, quick-change sanding disc has heavy YF-cloth or fibre backing and, for best results, should be used on stainless steel.