Product ITEM is unavailable. See products from the same category below.
PAPR Lenses, Lens Covers & Protective Plates
PAPR (powered air-purifying respirator) lenses and plates fit into PAPR headgear and hoods. Protection plates attach to the headgear to hold lenses. Lenses protect the eyes and face are replaced when they become worn, damaged, or affect visibility. Lens plates PAPR lens covers attach to a lens to protect it from damage. Lens covers are removed and replaced as needed.
This Versaflo small/medium peel-off visor cover comes in clear. The side visor cover measures 7 width x 12 inches height and is suitable for use with integrated harness products/600/800 S-series. There are 10 visor covers in a box.
This Versaflo small/medium peel-off visor cover comes in clear. The side visor cover measures 7 width x 12 inches height and is suitable for use with integrated harness products/600/800 S-series. There are 10 visor covers in a box.
This Speedglas 9100 scratch-resistant outside protection plate is made of polycarbonate and is designed for use with Speedglas 9100MP welding helmets. There are 50 plates in a case.
This Speedglas 9100 scratch-resistant outside protection plate is made of polycarbonate and is designed for use with Speedglas 9100MP welding helmets. There are 50 plates in a case.
This 7000-series reusable tinted lens cover is made of polyester film and is suitable for use with 7800S full-facepiece respirator. There are 25 covers in a case.
This 7000-series reusable tinted lens cover is made of polyester film and is suitable for use with 7800S full-facepiece respirator. There are 25 covers in a case.
This FF-400-series lens cover has adhesive locations on the sides, is made of polyester film, and comes in white. It measures 12 7/10 width x 6 2/5 inches height. The lens is suitable for use with FF-400 Ultimate FX full-facepiece respirator. There are 25 covers in a pack.
This FF-400-series lens cover has adhesive locations on the sides, is made of polyester film, and comes in white. It measures 12 7/10 width x 6 2/5 inches height. The lens is suitable for use with FF-400 Ultimate FX full-facepiece respirator. There are 25 covers in a pack.
This Versaflo medium/large peel-off visor cover comes in clear. The side visor cover measures 7 width x 0.25 inch thickness and is suitable for use with integrated harness products/600/800 S-series. There are 10 visor covers in a box.
This Versaflo medium/large peel-off visor cover comes in clear. The side visor cover measures 7 width x 0.25 inch thickness and is suitable for use with integrated harness products/600/800 S-series. There are 10 visor covers in a box.
This Speedglas welding starter kit is made of polycarbonate and has an ADF viewing area measuring 4 1/5 width x 2 1/10 inches height. It is for use with Speedglas 9100X auto-darkening filter. The kit includes five outside protection plates, two inside protection plates and an absorbent sweatband.
This Speedglas welding starter kit is made of polycarbonate and has an ADF viewing area measuring 4 1/5 width x 2 1/10 inches height. It is for use with Speedglas 9100X auto-darkening filter. The kit includes five outside protection plates, two inside protection plates and an absorbent sweatband.
This Speedglas 2.5X magnification plate measures 4 1/4 inches length and can be inserted 9100 ADF on the inside slot. It is for use with 9100 series welding helmets.
This Speedglas 2.5X magnification plate measures 4 1/4 inches length and can be inserted 9100 ADF on the inside slot. It is for use with 9100 series welding helmets.
This Speedglas standard outer protection plate is made of polycarbonate and is designed for use with Speedglas 9000/Flexview/Utility welding helmets. There are 10 plates in a pack.
This Speedglas standard outer protection plate is made of polycarbonate and is designed for use with Speedglas 9000/Flexview/Utility welding helmets. There are 10 plates in a pack.
This FF-400-series semi-permanent lens protector having adhesive locations on the perimeter is made of polyester film and comes in brown. It measures 6 1/4 width x 17/250 inches thickness. The lens protector with Scotchgard coating is suitable for use with FF-400 Ultimate FX full-facepiece respirator. There are five lens protectors in a pack.
This FF-400-series semi-permanent lens protector having adhesive locations on the perimeter is made of polyester film and comes in brown. It measures 6 1/4 width x 17/250 inches thickness. The lens protector with Scotchgard coating is suitable for use with FF-400 Ultimate FX full-facepiece respirator. There are five lens protectors in a pack.
This clear, disposable faceshield cover is made of polyester film. It is for use with a 6000 series full facepiece reusable respirator. There are 25 covers in a pack.
This clear, disposable faceshield cover is made of polyester film. It is for use with a 6000 series full facepiece reusable respirator. There are 25 covers in a pack.
This Speedglas 3.0X magnification plate measures 4 1/4 inches length and can be inserted 9100 ADF on the inside slot. It is for use with 9100 series welding helmets.
This Speedglas 3.0X magnification plate measures 4 1/4 inches length and can be inserted 9100 ADF on the inside slot. It is for use with 9100 series welding helmets.
This Versaflo M-series replacement visor frame button includes four-point textile straps/visors and meets the NIOSH standard. It is suitable for use with Versaflo M-400-series helmets of a powered air-purifying respirator. There are 10 visor frame buttons in a case.
This Versaflo M-series replacement visor frame button includes four-point textile straps/visors and meets the NIOSH standard. It is suitable for use with Versaflo M-400-series helmets of a powered air-purifying respirator. There are 10 visor frame buttons in a case.
This Versaflo peel-off visor cover comes in clear. The side visor cover measures 7 width x 13 1/8 inches height and is suitable for use with S-600/S-700/S-800 hood assemblies. There are 10 visor covers in a pack.
This Versaflo peel-off visor cover comes in clear. The side visor cover measures 7 width x 13 1/8 inches height and is suitable for use with S-600/S-700/S-800 hood assemblies. There are 10 visor covers in a pack.
This Speedglas 9100XX welding auto-darkening filter measures 4 1/4 width x 2 3/4 inches height and has variable shades 5 and 8 to 13. It includes CR2032 and is designed for use with Speedglas welding helmet 9100. The filter meets the NIOSH standard.
This Speedglas 9100XX welding auto-darkening filter measures 4 1/4 width x 2 3/4 inches height and has variable shades 5 and 8 to 13. It includes CR2032 and is designed for use with Speedglas welding helmet 9100. The filter meets the NIOSH standard.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
