These drill bits do not have coolant holes. If coolant is required for drilling, it must be fed from the machine to the bits' tip using a separate hose. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel, cobalt, or powdered-metal drill bits and require a rigid setup such as a fixed-spindle machine. The bits create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling. Jobber-length drill bits provide a good balance of strength and accuracy when drilling into a variety of materials.
This general purpose jobber length drill bit is made of carbide and has a 17/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a 3½ inch length. Plus it has one 2⅛ inch spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a 17/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a 3½ inch length. Plus it has one 2⅛ inch spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has one 3 3/16 inch spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has one 3 3/16 inch spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide and has a ½ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has one 3 inch spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a ½ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has one 3 inch spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a ¼ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3¼ inch length. Plus it has one 2¾-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a ¼ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3¼ inch length. Plus it has one 2¾-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a 17/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3½ inch length. Plus it has one 2⅛ inch spiral flutes, a straight shank, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a 17/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3½ inch length. Plus it has one 2⅛ inch spiral flutes, a straight shank, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has one 1½ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has one 1½ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has one 1¼ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has one 1¼ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has one 1¾ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has one 1¾ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has one 2⅞-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has one 2⅞-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide and has a 21/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has one 2½-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a 21/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has one 2½-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2½ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2½ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has one ⅞-inch spiral flute, a straight shank, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has one ⅞-inch spiral flute, a straight shank, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a ⅛ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2¼ inch length. Plus it has one 1¼ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a ⅛ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2¼ inch length. Plus it has one 1¼ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2¾ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2¾ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, and 118 Degrees conventional point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has one 1⅝ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has one 1⅝ inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1¾ inch length. Plus it has one ¾-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
This general purpose jobber length drill bit is made of carbide. It is not rated for any standards. This jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1¾ inch length. Plus it has one ¾-inch spiral flute, a straight shank, a right hand cutting direction, and 118 Degrees conventional point drill point.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
