Machining
Drilling & Holemaking
Drill Bits
Drill Bits for Metal & Plastic
Jobber-Length Drill Bits
High-Speed Steel Jobber-Length Drill Bits
Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits
Close

Filter Results By

Applied Filters

Clear All

Brand
CLE-LINE

Search within these results

Shop By

New (30)

In Stock Now (364)

Brand

BOSCH BOSCH (24)
BRADY BRADY (1)
CHICAGO-LATROBE CHICAGO-LATROBE (1,449)
CLARKSON-OSBORN CLARKSON-OSBORN (399)
CLE-LINE CLE-LINE (1,084)
CLEVELAND CLEVELAND (385)
DEWALT (28)

DRILLCO (365)

IRWIN (21)

JET (5)

MILWAUKEE (2)

ONSRUD (5)

OSG (36)

SOWA DRILLS (91)

STM PREMIUM (54)

WALTER SURFACE TECHNOLOGIES (39)

WESTWARD (262)

YG-1 TOOL COMPANY (2)
View more View less

Price

Under $10 Under $10 (853)
$10 - $15 $10 - $15 (113)
$15 - $20 $15 - $20 (46)
$20 - $25 $20 - $25 (15)
$25 - $30 $25 - $30 (7)
$30 - $35 $30 - $35 (9)
$35 - $40 (8)

$40 - $50 (11)

$50 - $60 (10)

$60 - $70 (6)

$70 - $80 (2)

$80 - $90 (2)

$90 - $100 (2)
View more View less

Measurement System

Fractional Inch Fractional Inch (211)
Fractional Inch, Letter Fractional Inch, Letter (1)
Letter Letter (93)
Metric Metric (437)
Wire Wire (342)

Drill Bit Size

#1 #1 (6)
#2 #2 (6)
#3 #3 (6)
#4 #4 (6)
#5 #5 (6)
#6 #6 (6)
#7 (6)

#8 (6)

#9 (6)

#10 (6)

#11 (6)

#12 (7)

#13 (6)

#14 (6)

#15 (6)

#16 (6)

#17 (6)

#18 (6)

#19 (6)

#20 (6)

#21 (6)

#22 (6)

#23 (6)

#24 (6)

#25 (6)

#26 (6)

#27 (6)

#28 (6)

#29 (6)

#30 (6)

#31 (6)

#32 (6)

#33 (6)

#34 (6)

#35 (6)

#36 (6)

#37 (6)

#38 (6)

#39 (6)

#40 (6)

#41 (6)

#42 (5)

#43 (5)

#44 (5)

#45 (5)

#46 (5)

#47 (5)

#48 (5)

#49 (5)

#50 (5)

#51 (5)

#52 (5)

#53 (5)

#54 (5)

#55 (5)

#56 (5)

#57 (5)

#58 (5)

#59 (5)

#60 (5)

1/32 in (1)

3/64 in (3)

1/16 in (8)

5/64 in (8)

3/32 in (8)

7/64 in (8)

1/8 in (7)

9/64 in (7)

5/32 in (7)

11/64 in (7)

3/16 in (7)

13/64 in (7)

7/32 in (7)

15/64 in (7)

1/4 in (7)

17/64 in (7)

9/32 in (7)

19/64 in (7)

5/16 in (7)

21/64 in (7)

11/32 in (7)

23/64 in (7)

3/8 in (7)

25/64 in (7)

13/32 in (7)

27/64 in (7)

7/16 in (8)

29/64 in (7)

15/32 in (7)

31/64 in (7)

1/2 in (7)

0.35 mm (1)

0.4 mm (2)

0.45 mm (2)

0.5 mm (1)

0.50 mm (1)

0.55 mm (1)

0.6 mm (1)

0.60 mm (1)

0.65 mm (1)

0.7 mm (1)

0.70 mm (1)

0.75 mm (1)

0.8 mm (1)

0.80 mm (1)

0.85 mm (2)

0.9 mm (1)

0.90 mm (1)

0.95 mm (2)

1 mm (2)

1.00 mm (2)

1.05 mm (2)

1.1 mm (1)

1.10 mm (1)

1.15 mm (2)

1.2 mm (1)

1.20 mm (3)

1.25 mm (2)

1.30 mm (2)

1.35 mm (2)

1.40 mm (2)

1.45 mm (2)

1.50 mm (4)

1.55 mm (2)

1.6 mm (1)

1.60 mm (3)

1.65 mm (2)

1.7 mm (1)

1.70 mm (1)

1.75 mm (2)

1.80 mm (2)

1.85 mm (2)

1.9 mm (1)

1.90 mm (1)

1.95 mm (2)

2 mm (1)

2.00 mm (3)

2.05 mm (2)

2.1 mm (2)

2.15 mm (2)

2.2 mm (1)

2.20 mm (1)

2.25 mm (2)

2.3 mm (3)

2.30 mm (1)

2.35 mm (2)

2.4 mm (2)

2.40 mm (2)

2.45 mm (2)

2.50 mm (4)

2.60 mm (2)

2.70 mm (4)

2.75 mm (1)

2.80 mm (4)

2.90 mm (4)

3.00 mm (4)

3.10 mm (4)

3.20 mm (4)

3.25 mm (2)

3.30 mm (4)

3.40 mm (2)

3.50 mm (4)

3.60 mm (4)

3.70 mm (4)

3.75 mm (2)

3.80 mm (4)

3.90 mm (2)

4 mm (1)

4.00 mm (3)

4.1 mm (1)

4.10 mm (3)

4.20 mm (4)

4.25 mm (2)

4.30 mm (2)

4.40 mm (2)

4.50 mm (4)

4.60 mm (4)

4.70 mm (2)

4.75 mm (1)

4.80 mm (3)

4.90 mm (4)

5.00 mm (4)

5.1 mm (1)

5.10 mm (3)

5.2 mm (1)

5.20 mm (3)

5.25 mm (1)

5.3 mm (2)

5.40 mm (2)

5.50 mm (4)

5.6 mm (1)

5.60 mm (1)

5.70 mm (2)

5.75 mm (1)

5.80 mm (2)

5.90 mm (4)

6 mm (1)

6.00 mm (3)

6.10 mm (2)

6.20 mm (2)

6.25 mm (1)

6.30 mm (2)

6.40 mm (4)

6.50 mm (4)

6.60 mm (4)

6.70 mm (4)

6.75 mm (1)

6.80 mm (3)

6.90 mm (5)

7.00 mm (4)

7.10 mm (2)

7.2 mm (1)

7.20 mm (3)

7.25 mm (1)

7.30 mm (4)

7.40 mm (2)

7.50 mm (4)

7.60 mm (2)

7.70 mm (2)

7.75 mm (1)

7.80 mm (2)

7.9 mm (1)

7.90 mm (1)

8.00 mm (4)

8.10 mm (2)

8.20 mm (2)

8.25 mm (1)

8.30 mm (4)

8.40 mm (2)

8.50 mm (4)

8.60 mm (2)

8.70 mm (2)

8.75 mm (1)

8.80 mm (2)

8.90 mm (2)

9 mm (1)

9.00 mm (3)

9.10 mm (2)

9.20 mm (2)

9.25 mm (1)

9.30 mm (2)

9.40 mm (2)

9.50 mm (4)

9.60 mm (2)

9.70 mm (2)

9.8 mm (1)

9.80 mm (1)

9.9 mm (1)

9.90 mm (1)

10 mm (1)

10.00 mm (3)

10.1 mm (1)

10.2 mm (3)

10.20 mm (1)

10.25 mm (1)

10.4 mm (1)

10.50 mm (4)

10.7 mm (2)

10.8 mm (3)

10.80 mm (1)

11.00 mm (4)

11.1 mm (2)

11.2 mm (2)

11.4 mm (1)

11.5 mm (1)

11.50 mm (3)

11.8 mm (4)

12.00 mm (4)

12.2 mm (2)

12.50 mm (4)

12.8 mm (2)

13 mm (1)

13.00 mm (3)

13.2 mm (2)

13.50 mm (2)

13.8 mm (2)

14.00 mm (2)

14.25 mm (2)

14.50 mm (2)

14.75 mm (2)

15.00 mm (2)

15.25 mm (1)

15.50 mm (2)

15.75 mm (2)

16.00 mm (2)

16.25 mm (2)

16.50 mm (2)

16.75 mm (2)

17.00 mm (2)

17.25 mm (1)

17.50 mm (2)

18.00 mm (2)

18.50 mm (1)

19.00 mm (2)

19.50 mm (1)

20.00 mm (1)

A (3)

B (3)

C (3)

D (4)

F (6)

G (4)

H (4)

I (4)

J (5)

K (3)

L (4)

M (3)

N (4)

O (4)

P (3)

Q (5)

R (4)

S (3)

T (4)

U (4)

V (3)

W (4)

X (3)

Y (3)

Z (3)
View more View less

Decimal Equivalent

0.0138 0.0138 (1)
0.0177 0.0177 (1)
0.0197 0.0197 (1)
0.0217 0.0217 (1)
0.0236 0.0236 (1)
0.0256 0.0256 (1)
0.0276 (1)

0.0295 (1)

0.0313 (1)

0.0315 (1)

0.0335 (1)

0.0354 (1)

0.0374 (2)

0.0394 (2)

0.04 (5)

0.041 (4)

0.0413 (2)

0.042 (5)

0.043 (5)

0.0433 (1)

0.0453 (2)

0.0465 (5)

0.0469 (1)

0.0472 (3)

0.0492 (2)

0.0512 (2)

0.052 (5)

0.0531 (2)

0.055 (5)

0.0551 (2)

0.0571 (2)

0.0591 (4)

0.0595 (5)

0.061 (1)

0.0625 (7)

0.063 (4)

0.0635 (5)

0.065 (1)

0.0669 (1)

0.067 (5)

0.0689 (2)

0.07 (5)

0.0709 (2)

0.0728 (2)

0.073 (4)

0.0748 (1)

0.076 (5)

0.0768 (2)

0.0781 (7)

0.0785 (4)

0.0787 (3)

0.0807 (2)

0.081 (5)

0.082 (5)

0.0846 (2)

0.086 (5)

0.0866 (1)

0.0886 (2)

0.089 (5)

0.0906 (1)

0.0925 (1)

0.0935 (5)

0.0938 (7)

0.0945 (2)

0.096 (6)

0.0965 (2)

0.098 (6)

0.0984 (4)

0.0995 (5)

0.1015 (5)

0.1024 (2)

0.104 (6)

0.1063 (4)

0.1065 (6)

0.1083 (1)

0.1094 (7)

0.11 (6)

0.1102 (4)

0.111 (6)

0.113 (6)

0.1142 (4)

0.116 (6)

0.1181 (4)

0.12 (6)

0.122 (3)

0.125 (6)

0.126 (4)

0.128 (2)

0.1285 (6)

0.1299 (4)

0.1339 (2)

0.136 (6)

0.1378 (4)

0.1405 (6)

0.1406 (6)

0.1417 (4)

0.144 (6)

0.1457 (4)

0.147 (5)

0.1476 (2)

0.1495 (6)

0.1496 (4)

0.152 (6)

0.1535 (2)

0.154 (6)

0.1563 (6)

0.157 (6)

0.1575 (3)

0.159 (6)

0.161 (4)

0.1614 (3)

0.1654 (4)

0.166 (6)

0.1673 (1)

0.1693 (2)

0.1695 (6)

0.1719 (6)

0.173 (6)

0.1732 (2)

0.177 (6)

0.1772 (4)

0.18 (5)

0.1811 (4)

0.182 (6)

0.185 (7)

0.187 (1)

0.1875 (5)

0.189 (10)

0.191 (6)

0.1929 (4)

0.1935 (5)

0.196 (6)

0.1969 (4)

0.199 (5)

0.2008 (3)

0.201 (5)

0.2031 (6)

0.204 (6)

0.2047 (3)

0.2055 (6)

0.2067 (1)

0.209 (6)

0.2126 (2)

0.213 (6)

0.2165 (4)

0.2188 (6)

0.2205 (1)

0.221 (6)

0.2244 (2)

0.2264 (1)

0.228 (4)

0.2283 (2)

0.2323 (4)

0.234 (3)

0.2344 (6)

0.2362 (3)

0.238 (3)

0.2402 (2)

0.242 (3)

0.2441 (2)

0.246 (4)

0.2461 (1)

0.248 (2)

0.25 (6)

0.252 (4)

0.2559 (4)

0.257 (6)

0.2598 (4)

0.261 (4)

0.2638 (4)

0.2656 (6)

0.2657 (1)

0.266 (4)

0.2677 (3)

0.2717 (5)

0.272 (4)

0.2756 (4)

0.277 (5)

0.2795 (2)

0.281 (3)

0.2813 (5)

0.2835 (3)

0.2874 (4)

0.29 (4)

0.2913 (2)

0.295 (3)

0.2953 (4)

0.2969 (6)

0.2992 (2)

0.302 (4)

0.3031 (2)

0.3051 (1)

0.3071 (2)

0.311 (2)

0.3125 (6)

0.315 (3)

0.316 (4)

0.3189 (2)

0.3228 (2)

0.323 (3)

0.3248 (1)

0.3268 (4)

0.3281 (6)

0.3307 (2)

0.332 (5)

0.3346 (4)

0.3386 (2)

0.339 (4)

0.3425 (2)

0.3438 (6)

0.3445 (1)

0.3465 (2)

0.348 (3)

0.3504 (2)

0.3543 (3)

0.358 (4)

0.3583 (2)

0.3594 (6)

0.3622 (2)

0.3642 (1)

0.3661 (2)

0.368 (4)

0.3701 (2)

0.374 (5)

0.375 (5)

0.377 (3)

0.378 (2)

0.3819 (2)

0.3858 (1)

0.386 (4)

0.3898 (1)

0.3906 (6)

0.3937 (3)

0.397 (3)

0.4016 (1)

0.4035 (1)

0.404 (3)

0.4063 (6)

0.413 (3)

0.4134 (4)

0.4219 (6)

0.4252 (1)

0.4331 (4)

0.4375 (7)

0.4528 (3)

0.4531 (6)

0.4688 (5)

0.4724 (4)

0.4844 (5)

0.4921 (4)

0.5 (5)

0.5118 (3)

0.5315 (2)

0.5512 (2)

0.561 (1)

0.5709 (2)

0.5807 (2)

0.5906 (2)

0.6024 (1)

0.6102 (2)

0.6201 (2)

0.6299 (2)

0.6398 (2)

0.6496 (2)

0.6594 (2)

0.6693 (2)

0.6791 (1)

0.689 (2)

0.7087 (2)

0.7283 (1)

0.748 (2)

0.7677 (1)

0.7874 (1)

0.0157 in (2)

0.0177 in (1)

0.0197 in (1)

0.0236 in (1)

0.0276 in (1)

0.0315 in (1)

0.0335 in (1)

0.0354 in (1)

0.0394 in (2)

0.041 in (1)

0.0433 in (1)

0.0469 in (2)

0.0472 in (1)

0.0625 in (1)

0.063 in (1)

0.065 in (1)

0.0669 in (1)

0.073 in (1)

0.0748 in (1)

0.0781 in (1)

0.0785 in (1)

0.0787 in (1)

0.0827 in (2)

0.0866 in (1)

0.0906 in (3)

0.0925 in (1)

0.0938 in (1)

0.0945 in (2)

0.0995 in (1)

0.1015 in (1)

0.1094 in (1)

0.1250 in (1)

0.128 in (1)

0.1406 in (1)

0.147 in (1)

0.1563 in (1)

0.1575 in (1)

0.161 in (2)

0.1614 in (1)

0.1673 in (1)

0.1719 in (1)

0.18 in (1)

0.1875 in (2)

0.1935 in (1)

0.199 in (1)

0.2008 in (1)

0.201 in (1)

0.2031 in (1)

0.2047 in (1)

0.2087 in (2)

0.2188 in (1)

0.2205 in (1)

0.228 in (2)

0.2344 in (1)

0.2362 in (1)

0.2500 in (1)

0.2656 in (1)

0.2812 in (1)

0.2813 in (1)

0.2835 in (1)

0.2854 in (1)

0.2969 in (1)

0.3125 in (1)

0.315 in (1)

0.3281 in (1)

0.3438 in (1)

0.3543 in (1)

0.3594 in (1)

0.375 in (1)

0.3750 in (1)

0.3858 in (1)

0.3898 in (1)

0.3906 in (1)

0.3937 in (1)

0.3976 in (1)

0.4016 in (2)

0.4063 in (1)

0.4094 in (1)

0.4213 in (2)

0.4219 in (1)

0.4252 in (2)

0.437 in (2)

0.4375 in (1)

0.4409 in (2)

0.4488 in (1)

0.4528 in (1)

0.4531 in (1)

0.4646 in (3)

0.4688 in (2)

0.4803 in (1)

0.4844 in (2)

0.5 in (1)

0.5000 in (1)

0.5039 in (2)

0.5118 in (1)

0.5197 in (2)

0.5433 in (2)

0.561 in (1)

10.2 mm (1)

10.8 mm (1)

11.8 mm (1)

12.2 mm (1)
View more View less

Finish - Machining

Black and Gold Black and Gold (86)
Black Oxide Black Oxide (503)
Black, Gold Black, Gold (5)
Bright (Uncoated) Bright (Uncoated) (264)
Steam Oxide Steam Oxide (62)
TiN TiN (164)

Drill Bit Point Angle

118 Degrees 118 Degrees (745)
135 Degrees 135 Degrees (339)

Drill Bit Point Type

Conventional Point Conventional Point (625)
Notched Point Notched Point (1)
Radial Radial (30)
Radial Point Radial Point (90)
Split Point Split Point (338)

Flute Type

Parabolic Parabolic (68)
Spiral Spiral (1,016)

Flute Length

0.1969 in 0.1969 in (3)
0.2362 in 0.2362 in (1)
0.2756 in 0.2756 in (1)
0.3543 in 0.3543 in (1)
0.3937 in 0.3937 in (2)
0.4331 in 0.4331 in (1)
0.4724 in (2)

1/2 in (1)

0.5512 in (1)

0.6299 in (1)

0.6875 in (1)

11/16 in (14)

0.75 in (1)

0.750 in (1)

3/4 in (11)

0.7874 in (3)

0.8661 in (1)

0.875 in (1)

7/8 in (27)

0.9449 in (3)

1 in (33)

1.063 in (5)

1 1/8 in (15)

1.1811 in (2)

1 1/4 in (17)

1.250 in (1)

1 3/8 in (17)

1.375 in (1)

1.4173 in (1)

1 7/16 in (17)

1.4375 in (1)

1 1/2 in (25)

1.500 in (1)

1 5/8 in (24)

1.625 in (1)

1.6929 in (3)

1 3/4 in (18)

1.750 in (1)

1 7/8 in (17)

1.875 in (1)

2 in (25)

2.0472 in (4)

2 1/8 in (28)

2.125 in (3)

2 3/16 in (23)

2.1875 in (1)

2.2441 in (2)

2.312 in (1)

2 5/16 in (23)

2.3125 in (1)

2.437 in (1)

2 7/16 in (27)

2.4375 in (3)

2 1/2 in (30)

2.500 in (1)

2 5/8 in (19)

2.625 in (3)

2.7165 in (2)

2 3/4 in (16)

2.750 in (1)

2 7/8 in (29)

2.875 in (1)

2.937 in (1)

2 15/16 in (12)

2.9375 in (1)

2.9528 in (1)

3.062 in (1)

3 1/16 in (13)

3.187 in (1)

3 3/16 in (10)

3.189 in (1)

3.312 in (1)

3 5/16 in (9)

3.4252 in (8)

3.437 in (1)

3 7/16 in (15)

3 1/2 in (13)

3.500 in (1)

3 5/8 in (12)

3.625 in (2)

3.7008 in (15)

3 3/4 in (13)

3.750 in (1)

3 7/8 in (12)

3.875 in (1)

3.937 in (1)

3 15/16 in (6)

3.9764 in (7)

4.062 in (1)

4 1/16 in (6)

4.187 in (1)

4 3/16 in (6)

4.252 in (2)

4.312 in (1)

4 5/16 in (5)

4.3125 in (1)

4 3/8 in (5)

4.375 in (2)

4.4882 in (1)

4 1/2 in (5)

4.5 in (1)

4.500 in (1)

9 in (1)

4.00 mm (1)

5.00 mm (1)

6.00 mm (1)

7.00 mm (2)

8.00 mm (1)

9.00 mm (2)

10.00 mm (2)

11.00 mm (3)

12.00 mm (4)

14.00 mm (3)

16.00 mm (7)

18.00 mm (10)

20.00 mm (7)

22.00 mm (7)

24.00 mm (7)

27.00 mm (7)

30.00 mm (10)

33.00 mm (17)

36.00 mm (13)

39.00 mm (15)

43.00 mm (18)

47.00 mm (15)

52.00 mm (19)

57.00 mm (19)

63.00 mm (24)

69.00 mm (27)

75.00 mm (27)

81.00 mm (25)

87.00 mm (15)

94.00 mm (8)

101.00 mm (11)

108.00 mm (4)

114.00 mm (7)

120.00 mm (7)

125.00 mm (8)

130.00 mm (5)

135.00 mm (3)

140.00 mm (2)
View more View less

Shank Type - Machining

Straight Straight (993)
Straight with Three Flats Straight with Three Flats (91)

Shank Dia.

1/64 in 1/64 in (1)
0.0157 in 0.0157 in (2)
0.0177 in 0.0177 in (1)
0.0197 in 0.0197 in (1)
0.0236 in 0.0236 in (1)
0.0276 in 0.0276 in (1)
1/32 in (24)

0.0315 in (1)

0.0335 in (1)

0.0354 in (1)

0.0394 in (2)

0.041 in (1)

0.0433 in (1)

3/64 in (16)

0.0469 in (2)

0.0472 in (1)

0.0625 in (1)

1/16 in (37)

0.063 in (1)

0.065 in (1)

0.0669 in (1)

0.073 in (1)

0.0748 in (1)

0.0781 in (1)

5/64 in (30)

0.0785 in (1)

0.0787 in (1)

0.0827 in (2)

0.0866 in (1)

0.0906 in (3)

0.0925 in (1)

3/32 in (41)

0.0938 in (1)

0.0945 in (2)

0.0995 in (1)

0.1015 in (1)

7/64 in (37)

0.1094 in (1)

0.125 in (1)

1/8 in (30)

0.128 in (1)

0.1406 in (1)

9/64 in (35)

0.147 in (1)

0.1562 in (1)

5/32 in (28)

0.1575 in (1)

0.161 in (2)

0.1614 in (1)

0.1673 in (1)

11/64 in (35)

0.1719 in (1)

0.18 in (1)

0.1875 in (2)

3/16 in (44)

0.1935 in (1)

0.199 in (1)

0.2008 in (1)

0.201 in (1)

0.2031 in (1)

13/64 in (24)

0.2047 in (1)

0.2087 in (2)

7/32 in (19)

0.2188 in (1)

0.2205 in (1)

0.228 in (2)

15/64 in (16)

0.2344 in (1)

0.2362 in (1)

0.25 in (1)

1/4 in (22)

0.2656 in (1)

17/64 in (21)

0.2812 in (1)

9/32 in (7)

0.2813 in (1)

0.2835 in (1)

0.2854 in (1)

19/64 in (10)

0.2969 in (1)

0.311 in (1)

0.3125 in (1)

5/16 in (19)

0.3281 in (1)

21/64 in (9)

11/32 in (13)

0.3438 in (1)

0.3543 in (1)

23/64 in (10)

0.3594 in (1)

0.375 in (2)

3/8 in (18)

0.3858 in (1)

0.3898 in (1)

0.3906 in (1)

25/64 in (12)

0.3937 in (1)

0.3976 in (1)

0.4016 in (3)

0.4062 in (1)

13/32 in (3)

0.4094 in (1)

0.4213 in (2)

27/64 in (6)

0.4219 in (1)

0.4252 in (3)

0.437 in (2)

0.4375 in (1)

7/16 in (13)

0.4409 in (2)

0.4488 in (1)

0.4528 in (1)

0.4531 in (1)

0.4646 in (4)

15/32 in (5)

0.4688 in (2)

0.4803 in (2)

31/64 in (5)

0.4844 in (2)

0.5 in (1)

1/2 in (6)

0.5039 in (2)

0.5118 in (1)

0.5197 in (2)

0.5433 in (2)

0.561 in (1)

1 3/64 in (2)

1 3/32 in (1)

1 9/64 in (2)

1 3/16 in (3)

1 1/4 in (2)

1 19/64 in (2)

1 11/32 in (2)

1 25/64 in (2)

1 7/16 in (2)

1 1/2 in (4)

1 35/64 in (2)

1 19/32 in (3)

1 41/64 in (1)

1 11/16 in (1)

1 3/4 in (2)

1 51/64 in (2)

1 27/32 in (2)

1 57/64 in (1)

1 15/16 in (2)

0.3 mm (1)

0.4 mm (1)

0.5 mm (2)

0.6 mm (2)

0.7 mm (2)

0.8 mm (2)

0.9 mm (3)

1 mm (2)

2 mm (5)

2.1 mm (2)

2.2 mm (3)

2.3 mm (2)

2.4 mm (4)

2.5 mm (4)

2.6 mm (2)

2.7 mm (5)

2.8 mm (4)

2.9 mm (4)

3 mm (4)

3.1 mm (4)

3.2 mm (5)

3.3 mm (4)

3.4 mm (2)

3.5 mm (4)

3.6 mm (4)

3.7 mm (6)

3.8 mm (4)

3.9 mm (2)

4 mm (3)

4.1 mm (3)

4.2 mm (5)

4.3 mm (2)

4.4 mm (2)

4.5 mm (4)

4.6 mm (4)

4.7 mm (3)

4.8 mm (4)

4.9 mm (4)

5 mm (4)

5.1 mm (3)

5.2 mm (4)

5.4 mm (2)

5.5 mm (4)

5.6 mm (1)

5.7 mm (3)

5.8 mm (2)

5.9 mm (4)

6 mm (3)

6.1 mm (2)

6.2 mm (3)

6.3 mm (2)

6.4 mm (4)

6.5 mm (4)

6.6 mm (4)

6.7 mm (5)

6.8 mm (3)

6.9 mm (5)

7 mm (4)

7.1 mm (2)

7.2 mm (3)

7.3 mm (4)

7.4 mm (2)

7.5 mm (4)

7.6 mm (2)

7.7 mm (3)

7.8 mm (2)

7.9 mm (1)

8 mm (4)

8.1 mm (2)

8.2 mm (3)

8.3 mm (4)

8.4 mm (2)

8.5 mm (4)

8.6 mm (2)

8.7 mm (3)

8.8 mm (2)

8.9 mm (2)

9 mm (3)

9.1 mm (2)

9.2 mm (3)

9.3 mm (2)

9.4 mm (2)

9.5 mm (4)

9.6 mm (2)

9.7 mm (2)

9.8 mm (1)

9.9 mm (1)

10 mm (3)

10.2 mm (2)

10.5 mm (4)

10.8 mm (1)

11 mm (4)

11.5 mm (3)

12 mm (4)

12.5 mm (4)

13 mm (3)

13.5 mm (2)

14 mm (2)

14.2 mm (1)

14.5 mm (2)

14.7 mm (2)

15 mm (2)

15.2 mm (1)

15.5 mm (2)

15.7 mm (2)

16 mm (2)

16.2 mm (2)

16.5 mm (2)

16.7 mm (2)

17 mm (2)

17.2 mm (1)

17.5 mm (2)

18 mm (2)

18.5 mm (1)

19 mm (2)

19.5 mm (1)

20 mm (1)
View more View less

Overall Length

0.787 in 0.787 in (3)
0.866 in 0.866 in (1)
0.945 in 0.945 in (1)
1.102 in 1.102 in (1)
1.181 in 1.181 in (2)
1.26 in 1.26 in (1)
1.339 in (2)

1 3/8 in (1)

1.417 in (1)

1.496 in (1)

1 5/8 in (14)

1.625 in (1)

1.693 in (3)

1 3/4 in (11)

1.75 in (1)

1.750 in (1)

1.811 in (1)

1 7/8 in (27)

1.875 in (1)

1.929 in (3)

2 in (33)

2.087 in (5)

2 1/8 in (15)

2.244 in (2)

2 1/4 in (17)

2.250 in (1)

2 3/8 in (17)

2.375 in (1)

2 1/2 in (17)

2.5 in (1)

2.559 in (1)

2 5/8 in (24)

2.625 in (1)

2 3/4 in (24)

2.750 in (1)

2 7/8 in (18)

2.875 in (1)

2.953 in (3)

3 in (18)

3 1/8 in (24)

3.125 in (1)

3 1/4 in (28)

3.25 in (2)

3.250 in (1)

3 3/8 in (23)

3.375 in (1)

3.386 in (4)

3 1/2 in (23)

3.5 in (1)

3.500 in (1)

3 5/8 in (28)

3.625 in (4)

3.661 in (2)

3 3/4 in (30)

3.750 in (1)

3 7/8 in (19)

3.875 in (3)

4 in (17)

4 1/8 in (29)

4.125 in (1)

4 1/4 in (12)

4.25 in (1)

4.250 in (1)

4.291 in (2)

4 3/8 in (13)

4.375 in (1)

4 1/2 in (10)

4.500 in (1)

4.606 in (1)

4 5/8 in (9)

4.625 in (1)

4 3/4 in (15)

4.75 in (1)

4 7/8 in (13)

4.875 in (1)

4.921 in (1)

5 in (14)

5 1/8 in (13)

5.125 in (1)

5.236 in (8)

5 1/4 in (12)

5.250 in (1)

5 3/8 in (6)

5.375 in (1)

5 1/2 in (6)

5.500 in (1)

5.591 in (15)

5 5/8 in (6)

5.625 in (1)

5 3/4 in (5)

5.75 in (1)

5.750 in (1)

5 7/8 in (5)

5.875 in (2)

5.945 in (7)

6 in (7)

6.299 in (2)

6.654 in (1)

12 in (1)

19.00 mm (1)

20.00 mm (1)

22.00 mm (1)

24.00 mm (2)

26.00 mm (1)

28.00 mm (2)

30.00 mm (2)

32.00 mm (3)

34.00 mm (4)

36.00 mm (3)

38.00 mm (7)

40.00 mm (10)

43.00 mm (7)

46.00 mm (7)

49.00 mm (7)

53.00 mm (7)

57.00 mm (10)

61.00 mm (17)

65.00 mm (13)

70.00 mm (15)

75.00 mm (18)

80.00 mm (15)

86.00 mm (19)

93.00 mm (19)

101.00 mm (24)

109.00 mm (27)

117.00 mm (27)

125.00 mm (25)

133.00 mm (15)

142.00 mm (8)

151.00 mm (11)

160.00 mm (4)

169.00 mm (7)

178.00 mm (7)

184.00 mm (8)

191.00 mm (5)

198.00 mm (3)

205.00 mm (2)
View more View less

Primary Material Application

Aluminum, Brass, Bronze, Cast Iron, Copper, Steel Aluminum, Brass, Bronze, Cast Iron, Copper, Steel (609)
Aluminum, Cast Iron, Steel Aluminum, Cast Iron, Steel (195)
Carbon Steel, Cast Iron Carbon Steel, Cast Iron (1)
Cast Iron, Steel Cast Iron, Steel (279)

Standards

ANSI ANSI (4)
ASME ASME (1)
ASME B94.11M ASME B94.11M (409)
ASME B94.11M, DIN 338 ASME B94.11M, DIN 338 (263)
ASME B94.11M, DIN 340 ASME B94.11M, DIN 340 (135)
DIN 338 DIN 338 (221)
DIN 340 (51)
View more View less

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits

Non-coolant-through high-speed steel jobber-length drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt, powdered-metal, and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a range of materials.

https://catalogue.grainger.ca/?hybris=true

1084 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

JOBBER LENGTH DRILL BIT, 1.1MM DRILL BIT SIZE, 14MM FLUTE L, 36MM OVERALL L, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, 1.1MM DRILL BIT SIZE, 14MM FLUTE L, 36MM OVERALL L, HSS
Item # GNF1899-22795
Mfr. Model # C22795

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 1 3/32 inch diameter, 22 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 36mm length. Plus it has two 14mm spiral flutes, a straight shank, and 118 Degrees conventional point.

This jobber length drill bit is made of high speed steel and has a 1 3/32 inch diameter, 22 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 36mm length. Plus it has two 14mm spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1270

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $1.95 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 3/16 IN DRILL BIT SIZE, 2-5/16 IN FLUTE L, 3½ IN L, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, 3/16 IN DRILL BIT SIZE, 2-5/16 IN FLUTE L, 3½ IN L, HSS
Item # GNF1878-18008
Mfr. Model # C18008

EHC: EHC :

Heavy-duty jobber drill bit. High speed construction, 135 degree split point, black and gold finish. Excellent for non-ferrous applications and low tensile steels. For portable drilling and maintenance applications.

Heavy-duty jobber drill bit. High speed construction, 135 degree split point, black and gold finish. Excellent for non-ferrous applications and low tensile steels. For portable drilling and maintenance applications.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1272

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.35 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 6.6MM DRILL BIT SIZE, 63MM FLUTE L, 101MM OVERALL L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, 6.6MM DRILL BIT SIZE, 63MM FLUTE L, 101MM OVERALL L, 4XD, HSS
Item # GNF1899-22864
Mfr. Model # C22864

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 6.6 mm diameter, 38 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 101mm length. Plus it has two 63mm spiral flutes, a straight shank, and 118 Degrees conventional point.

This jobber length drill bit is made of high speed steel and has a 6.6 mm diameter, 38 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 101mm length. Plus it has two 63mm spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1270

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.65 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 7.6MM DRILL BIT SIZE, 75MM FLUTE L, 117MM OVERALL L, 4XD

CLE-LINE
JOBBER LENGTH DRILL BIT, 7.6MM DRILL BIT SIZE, 75MM FLUTE L, 117MM OVERALL L, 4XD
Item # GNF1899-22874
Mfr. Model # C22874

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 7.6 mm diameter, 42 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has two 75mm spiral flutes, a straight shank, and 118 Degrees conventional point.

This jobber length drill bit is made of high speed steel and has a 7.6 mm diameter, 42 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has two 75mm spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1271

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $6.28 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #46 DRILL BIT SIZE, 1⅛ IN FLUTE L, 2⅛ IN L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, #46 DRILL BIT SIZE, 1⅛ IN FLUTE L, 2⅛ IN L, 4XD, HSS
Item # GNF1899-22661
Mfr. Model # C22661

EHC: EHC :

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1285

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.07 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #40 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, #40 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, 4XD, HSS
Item # GNF1899-22668
Mfr. Model # C22668

EHC: EHC :

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1285

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.14 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 17MM DRILL BIT SIZE, 125MM FLUTE L, 184MM OVERALL L, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, 17MM DRILL BIT SIZE, 125MM FLUTE L, 184MM OVERALL L, HSS
Item # GNF1899-22926
Mfr. Model # C22926

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 17 mm diameter, 59 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 184mm length. Plus it has two 125mm spiral flutes, a straight shank, and 118 Degrees conventional point.

This jobber length drill bit is made of high speed steel and has a 17 mm diameter, 59 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 184mm length. Plus it has two 125mm spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1271

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $58.61 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #8 DRILL BIT SIZE, 2-7/16 IN FLUTE L, 3⅝ IN L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, #8 DRILL BIT SIZE, 2-7/16 IN FLUTE L, 3⅝ IN L, 4XD, HSS
Item # GNF1899-22706
Mfr. Model # C22706

EHC: EHC :

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1285

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.55 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, B DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L, HIGH SPEED STEEL

CLE-LINE
JOBBER LENGTH DRILL BIT, B DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L, HIGH SPEED STEEL
Item # GNF1899-22718
Mfr. Model # C22718

EHC: EHC :

118 degree point. CLE-Line brand black oxide finish. For tool steel, alloyed steel, carbon steels, and cast iron. Size B, decimal equivalent 0.2380, flute length 2-3/4 in., length 4 in.

118 degree point. CLE-Line brand black oxide finish. For tool steel, alloyed steel, carbon steels, and cast iron. Size B, decimal equivalent 0.2380, flute length 2-3/4 in., length 4 in.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1271

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.69 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 1⅞ IN FLUTE L, 3 IN LENGTH, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 1⅞ IN FLUTE L, 3 IN LENGTH, 4XD, HSS
Item # GNF1878-18080
Mfr. Model # C18080

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 1878 series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 1878 series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1272

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.52 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 5/32 IN DRILL BIT SIZE, 2 IN FLUTE L, 3⅛ IN L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, 5/32 IN DRILL BIT SIZE, 2 IN FLUTE L, 3⅛ IN L, 4XD, HSS
Item # GNF1878-18006
Mfr. Model # C18006

EHC: EHC :

Heavy-duty jobber drill bit. High speed construction, 135 degree split point, black and gold finish. Excellent for non-ferrous applications and low tensile steels. For portable drilling and maintenance applications.

Heavy-duty jobber drill bit. High speed construction, 135 degree split point, black and gold finish. Excellent for non-ferrous applications and low tensile steels. For portable drilling and maintenance applications.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1272

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.69 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 4.5MM DRILL BIT SIZE, 47MM FLUTE L, 8MM OVERALL L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, 4.5MM DRILL BIT SIZE, 47MM FLUTE L, 8MM OVERALL L, 4XD, HSS
Item # GNF1899-22843
Mfr. Model # C22843

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 4.5 mm diameter, 33 mm long shank. It is for use with aluminum, cast iron, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 80mm length. Plus it has two 47mm spiral flutes, a straight shank, and 118 Degrees conventional point.

This jobber length drill bit is made of high speed steel and has a 4.5 mm diameter, 33 mm long shank. It is for use with aluminum, cast iron, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 80mm length. Plus it has two 47mm spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1270

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.84 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 8MM DRILL BIT SIZE, 75MM FLUTE L, 117MM OVERALL L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, 8MM DRILL BIT SIZE, 75MM FLUTE L, 117MM OVERALL L, 4XD, HSS
Item # GNF1899-22878
Mfr. Model # C22878

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 8 mm diameter, 42 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has two 75mm spiral flutes, a straight shank, and 118 Degrees conventional point.

This jobber length drill bit is made of high speed steel and has a 8 mm diameter, 42 mm long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for DIN 340. This 1899 series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has two 75mm spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1271

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.04 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #55 DRILL BIT SIZE, ⅞ IN FLUTE L, 1⅞ IN LENGTH, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, #55 DRILL BIT SIZE, ⅞ IN FLUTE L, 1⅞ IN LENGTH, 4XD, HSS
Item # GNF1899-22650
Mfr. Model # C22650

EHC: EHC :

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1285

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.53 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #41 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, HIGH SPEED STEEL

CLE-LINE
JOBBER LENGTH DRILL BIT, #41 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, HIGH SPEED STEEL
Item # GNF1899-22667
Mfr. Model # C22667

EHC: EHC :

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1285

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.14 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #35 DRILL BIT SIZE, 1½ IN FLUTE L, 2⅝ IN L, 4XD, HSS

CLE-LINE
JOBBER LENGTH DRILL BIT, #35 DRILL BIT SIZE, 1½ IN FLUTE L, 2⅝ IN L, 4XD, HSS
Item # GNF1899-22674
Mfr. Model # C22674

EHC: EHC :

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

High speed steel, 118 degree point, black finish. For tool steel, alloyed steel, carbon steels, cast iron.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1285

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.25 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits

1084 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits

1084 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All