High-Speed Steel Extended-Length Drill Bits

Heavy-duty extra length drills. Features a black oxide finish, 118 degree notch point, high speed steel construction. Size 1/4 inch, length 8 inches, flute length 5-1/2 inches.

Heavy-duty extra length drills. Features a black oxide finish, 118 degree notch point, high speed steel construction. Size 1/4 inch, length 8 inches, flute length 5-1/2 inches.

Heavy-duty extra length drills. Features a block oxide finish, 118 degree notch point, high speed steel construction. Size 3/16 inch, length 12 inches, flute lngth 9 inches.

Heavy-duty extra length drills. Features a block oxide finish, 118 degree notch point, high speed steel construction. Size 3/16 inch, length 12 inches, flute lngth 9 inches.

Heavy-duty extra length drills. Features a black oxide finish, 118 degree notch point, high speed steel construction. Size 5/16 inch, length 8 inches, flute length 5-1/2 inches.

Heavy-duty extra length drills. Features a black oxide finish, 118 degree notch point, high speed steel construction. Size 5/16 inch, length 8 inches, flute length 5-1/2 inches.

Heavy-duty extra length drills. Features a block oxide finish, 118 degree notch point, high speed steel construction. Size 1/2 inch, length 12 inches, flute length 9 inches.

Heavy-duty extra length drills. Features a block oxide finish, 118 degree notch point, high speed steel construction. Size 1/2 inch, length 12 inches, flute length 9 inches.

This high-performance extra long drill bit is made of high speed steel and has a 3/32 inch diameter, 4⅝ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance extra long drill bit is made of high speed steel and has a 3/32 inch diameter, 4⅝ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and a 135 Degrees split point.

Heavy-duty extra length drills. Features a black oxide finish, 118 degree notch point, high speed steel construction. Size 3/16 inch, length 8 inches, flute length 5-1/2 inches.

Heavy-duty extra length drills. Features a black oxide finish, 118 degree notch point, high speed steel construction. Size 3/16 inch, length 8 inches, flute length 5-1/2 inches.

This high-performance extra long drill bit is made of high speed steel. It is designed for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through. Plus it has 25 spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees notched point drill point.

This high-performance extra long drill bit is made of high speed steel. It is designed for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through. Plus it has 25 spiral flutes, a straight shank, a right hand cutting direction, and 118 Degrees notched point drill point.

This high-performance extra long drill bit is made of high speed steel and has a 5/32 inch diameter, 9⅞ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 12 inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance extra long drill bit is made of high speed steel and has a 5/32 inch diameter, 9⅞ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 12 inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance extra long drill bit is made of high speed steel and has a 5/32 inch diameter, 3⅞ inch long shank. It is designed for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance extra long drill bit is made of high speed steel and has a 5/32 inch diameter, 3⅞ inch long shank. It is designed for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 9 11/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 9 11/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This general purpose extra long drill bit is made of high speed steel and has a 13/64 inch diameter, 2½ inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with an eight-inch length. Plus it has two 5½ inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a 13/64 inch diameter, 2½ inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with an eight-inch length. Plus it has two 5½ inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a ⅛ inch diameter, 2½ inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 10 inch length. Plus it has two 7½ inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a ⅛ inch diameter, 2½ inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 10 inch length. Plus it has two 7½ inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a 11/32 inch diameter along with a three-inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 9 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a 11/32 inch diameter along with a three-inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 9 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This high-performance extra long drill bit is made of high speed steel and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 12 inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance extra long drill bit is made of high speed steel and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 12 inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This general purpose extra long drill bit is made of high speed steel and has a 17/64 inch diameter along with a three-inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 9 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a 17/64 inch diameter along with a three-inch long shank. It is for use with cast iron and steel. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 9 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This high-performance extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 9 11/16 inch long shank. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This high-performance extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 9 11/16 inch long shank. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.