Product ITEM is unavailable. See products from the same category below.
General Purpose Spiral-Point Taps
General purpose spiral-point taps are intended for threading a wide range of materials. The taps have straight flutes with a spiral point that pushes chips in front of the tap as it moves into a hole and out the other side, eventually forcing the chips out of the hole. They create internal threads in through holes and are installed into a toolholder on a machine such as a lathe or CNC machine to operate.
This tap is made of high speed steel and has a ¼ inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a ¼ inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.48 inch diameter, 2 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 96.77mm length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.48 inch diameter, 2 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 96.77mm length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.19 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.19 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.141 inch diameter, 1 9/32 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has pipe measurements. It has right hand direction with a 1⅞ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.141 inch diameter, 1 9/32 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has pipe measurements. It has right hand direction with a 1⅞ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.086 inch diameter, 1.3120 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has pipe measurements. It has right hand direction with a 1¾ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.086 inch diameter, 1.3120 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has pipe measurements. It has right hand direction with a 1¾ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a ¾ inch diameter, 2¼ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4¼ inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a ¾ inch diameter, 2¼ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4¼ inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.19 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has pipe measurements. It has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.19 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has pipe measurements. It has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a ¼ inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a ¼ inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a ¼ inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPLS series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a ¼ inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPLS series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 4mm diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has metric measurements. It has right hand direction with a 60.33mm length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 4mm diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has metric measurements. It has right hand direction with a 60.33mm length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.164 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.164 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.48 inch diameter, 2 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has fractional inch measurements. It has right hand direction with a 3-13/16 inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.48 inch diameter, 2 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has fractional inch measurements. It has right hand direction with a 3-13/16 inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.141 inch diameter, 1 9/32 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has pipe measurements. It has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.141 inch diameter, 1 9/32 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has pipe measurements. It has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.381 inch diameter, 1 11/16 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.381 inch diameter, 1 11/16 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-SO series tap has a steam oxide finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.381 inch diameter, 1 11/16 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 74.68mm length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.381 inch diameter, 1 11/16 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 74.68mm length. Plus it has three flutes and a straight shank.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
