Cobalt Jobber-Length Drill Bits

This jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 2¼ inch length. Plus it has 1¼ inch spiral flutes, a straight shank, and 143 Degrees conventional point.

This jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 2¼ inch length. Plus it has 1¼ inch spiral flutes, a straight shank, and 143 Degrees conventional point.

This jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 4½ inch length. Plus it has 3 3/16 inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 4½ inch length. Plus it has 3 3/16 inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 7/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 3¾ inch length. Plus it has 2½ inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 7/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 3¾ inch length. Plus it has 2½ inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 3/16 inch diameter, 1 5/16 inch long shank. It is for use with aluminum and non-ferrous material, cast iron, steel, hardened steel, high-temperature alloy. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 3/16 inch diameter, 1 5/16 inch long shank. It is for use with aluminum and non-ferrous material, cast iron, steel, hardened steel, high-temperature alloy. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of cobalt and has a 15/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 101mm length. Plus it has one 63mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 15/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 101mm length. Plus it has one 63mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 23/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 125mm length. Plus it has one 81mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 23/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 125mm length. Plus it has one 81mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 80mm length. Plus it has one 47mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 80mm length. Plus it has one 47mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 13/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has one 52mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 13/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has one 52mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has one 75mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has one 75mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 3/16 inch diameter, 1 3/16 inch long shank. It is for use with aluminum and non-ferrous material, cast iron, steel, hardened steel, high-temperature alloy. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 3/16 inch diameter, 1 3/16 inch long shank. It is for use with aluminum and non-ferrous material, cast iron, steel, hardened steel, high-temperature alloy. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 5/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅛ inch length. Plus it has one 1⅛ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 5/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅛ inch length. Plus it has one 1⅛ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has one 75mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has one 75mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 15/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 101mm length. Plus it has one 63mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 15/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 101mm length. Plus it has one 63mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 5/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3¼ inch length. Plus it has one 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 5/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3¼ inch length. Plus it has one 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 3 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 5/16 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 3 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 27/64 inch diameter, 1 7/16 inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 3 15/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 27/64 inch diameter, 1 7/16 inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 3 15/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.