Product ITEM is unavailable. See products from the same category below.
Carbide-Tipped Jobber-Length Drill Bits
Carbide-tipped jobber-length drill bits have carbide cutting edges that provide excellent hardness, wear resistance, and heat resistance and retain their hardness better than high-speed steel or cobalt cutting edges. The bits' bodies are made from a material that absorbs more vibration and shock than carbide, so they are less rigid and less likely to break than solid carbide drill bits. They are used in both handheld drilling tools and machines such as drill presses. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a variety of materials.
This M2 taper length drill bit is made of carbide tipped and has a 9/16 inch diameter, 3⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 8 ¼ inch length. Plus it has two 4⅞ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 9/16 inch diameter, 3⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 8 ¼ inch length. Plus it has two 4⅞ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 25/64 inch diameter, 2⅝ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 7 inch length. Plus it has two 4⅜ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 25/64 inch diameter, 2⅝ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 7 inch length. Plus it has two 4⅜ inch spiral flutes, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 27/64 inch diameter, 2⅝ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 7¼ inch length. Plus it has two 4⅝ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 27/64 inch diameter, 2⅝ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 7¼ inch length. Plus it has two 4⅝ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a ¼ inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch, letter measurements. It is non-coolant through with a 6⅛ inch length. Plus it has two 3¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a ¼ inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch, letter measurements. It is non-coolant through with a 6⅛ inch length. Plus it has two 3¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 3/16 inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 5¾ inch length. Plus it has two 3⅜ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 3/16 inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 5¾ inch length. Plus it has two 3⅜ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 33/64 inch diameter, 3¼ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with an eight-inch length. Plus it has two 4¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 33/64 inch diameter, 3¼ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with an eight-inch length. Plus it has two 4¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a ⅜ inch diameter, 2½ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 6¾ inch length. Plus it has two 4¼ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a ⅜ inch diameter, 2½ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 6¾ inch length. Plus it has two 4¼ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a ⅛ inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a ⅛ inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 7/32 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has two 3⅝ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 7/32 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has two 3⅝ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 11/32 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 6½ inch length. Plus it has two 4⅛ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 11/32 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 6½ inch length. Plus it has two 4⅛ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 7/16 inch diameter, 2⅝ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 7¼ inch length. Plus it has two 4⅝ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 7/16 inch diameter, 2⅝ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 7¼ inch length. Plus it has two 4⅝ inch spiral flutes, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 15/32 inch diameter, 2¾ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 7½ inch length. Plus it has two 4¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 15/32 inch diameter, 2¾ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 7½ inch length. Plus it has two 4¾ inch spiral flutes, a straight shank, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 17/64 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 6¼ inch length. Plus it has two 3⅞ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 17/64 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 6¼ inch length. Plus it has two 3⅞ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 5/32 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 3 inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a 5/32 inch diameter, 2⅜ inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 3 inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a ½ inch diameter along with a three-inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 7¾ inch length. Plus it has two 4¾ inch spiral flutes, and 118 Degrees radial point.
This M2 taper length drill bit is made of carbide tipped and has a ½ inch diameter along with a three-inch long shank. It is for use with alloy/carbon steel, aluminum, brass, bronze, cast iron, copper, and meets ANSI standards. This 2745 series taper length drill bit has a bright finish, and has fractional inch measurements. It is non-coolant through with a 7¾ inch length. Plus it has two 4¾ inch spiral flutes, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 5/16 inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 6⅜ inch length. Plus it has two 4 inch spiral flutes, a straight shank, and 118 Degrees radial point.
This heavy-duty twist drill bit is made of carbide-tipped high speed steel and has a 5/16 inch diameter, 2⅜ inch long shank. It is for use with alloy/low carbon steel, aluminum, cast iron, non-ferrous, and meets ANSI standards. This 2745 series taper length twist drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 6⅜ inch length. Plus it has two 4 inch spiral flutes, a straight shank, and 118 Degrees radial point.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
