Brass Compression Tube Fittings for Air, Liquids & Chemicals

This compression series nut meets the standards for SAE 060110, has a length of 13/32 inch, a maximum operating pressure of 400 psi and is designed for the following applications: air, inert gases, non-combustible gases. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a nut, with an imperial system of measurement, and ⅜"-24 thread. Plus, it has a compression connection type and 7/16 inch hex size.

This compression series nut meets the standards for SAE 060110, has a length of 13/32 inch, a maximum operating pressure of 400 psi and is designed for the following applications: air, inert gases, non-combustible gases. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a nut, with an imperial system of measurement, and ⅜"-24 thread. Plus, it has a compression connection type and 7/16 inch hex size.

This compression series female connector meets the standards for SAE J512, UL, has a length of 1 1/32 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This compression series female connector meets the standards for SAE J512, UL, has a length of 1 1/32 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This compression series long nut meets the standards for SAE J512, has a length of ¾ inch, a maximum operating pressure of 300 psi and is designed for the following applications: air, inert gases, non-combustible gases. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a long nut, with an imperial system of measurement, and 7/16"-24 thread. Plus, it has a compression connection type and ½ inch hex size.

This compression series long nut meets the standards for SAE J512, has a length of ¾ inch, a maximum operating pressure of 300 psi and is designed for the following applications: air, inert gases, non-combustible gases. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a long nut, with an imperial system of measurement, and 7/16"-24 thread. Plus, it has a compression connection type and ½ inch hex size.

This compression series male elbow meets the standards for SAE J512, UL, has a length of ⅞ inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This compression series male elbow meets the standards for SAE J512, UL, has a length of ⅞ inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This compression series female connector meets the standards for UL, has a length of one inch, a maximum operating pressure of 2,800 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This compression series female connector meets the standards for UL, has a length of one inch, a maximum operating pressure of 2,800 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This compression series brass sleeve meets the standards for SAE J512, has a length of ¼ inch, a maximum operating pressure of 300 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This compression series brass sleeve meets the standards for SAE J512, has a length of ¼ inch, a maximum operating pressure of 300 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This compression series extended elbow meets the standards for SAE J512, UL, has a length of 27/32 inch, a maximum operating pressure of 1,900 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This compression series extended elbow meets the standards for SAE J512, UL, has a length of 27/32 inch, a maximum operating pressure of 1,900 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This Poly-Tite series male connector has a length of 1⅜ inch, a maximum operating pressure of 150 psi and is designed for the following applications: liquids. It has an operating temperature of 0 Degrees F to 150 Degrees F and is resistant to UV and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This Poly-Tite series male connector has a length of 1⅜ inch, a maximum operating pressure of 150 psi and is designed for the following applications: liquids. It has an operating temperature of 0 Degrees F to 150 Degrees F and is resistant to UV and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This Poly-Tite series male elbow has a length of 29/32 inch, a maximum operating pressure of 150 psi and is designed for the following applications: liquids. It has an operating temperature of 0 Degrees F to 150 Degrees F and is resistant to UV and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This Poly-Tite series male elbow has a length of 29/32 inch, a maximum operating pressure of 150 psi and is designed for the following applications: liquids. It has an operating temperature of 0 Degrees F to 150 Degrees F and is resistant to UV and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This male branch tee has a length of 1 11/16 inch, a maximum operating pressure of 150 psi and is designed for the following applications: potable water. It has an operating temperature of 0 Degrees F to 150 Degrees F and is resistant to UV and is made of brass. In addition, it is an adapter tee.

This male branch tee has a length of 1 11/16 inch, a maximum operating pressure of 150 psi and is designed for the following applications: potable water. It has an operating temperature of 0 Degrees F to 150 Degrees F and is resistant to UV and is made of brass. In addition, it is an adapter tee.

This compression series brass sleeve meets the standards for SAE J512, has a length of 3/16 inch, a maximum operating pressure of 400 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This compression series brass sleeve meets the standards for SAE J512, has a length of 3/16 inch, a maximum operating pressure of 400 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This compression series male connector meets the standards for UL, has a length of 1 3/32 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 7/16 inch hex size.

This compression series male connector meets the standards for UL, has a length of 1 3/32 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 7/16 inch hex size.

This Poly-Tite series nut and acetal sleeve has a length of 11/32 inch, a maximum operating pressure of 150 psi and is designed for the following applications: air and non-potable water. It has an operating temperature of 0 Degrees F to 150 Degrees F, and is made of brass. In addition, it is a nut/acetal sleeve, with an imperial system of measurement, and 7/16"-24 thread. Plus, it has a compression connection type and ¼ inch hex size.

This Poly-Tite series nut and acetal sleeve has a length of 11/32 inch, a maximum operating pressure of 150 psi and is designed for the following applications: air and non-potable water. It has an operating temperature of 0 Degrees F to 150 Degrees F, and is made of brass. In addition, it is a nut/acetal sleeve, with an imperial system of measurement, and 7/16"-24 thread. Plus, it has a compression connection type and ¼ inch hex size.

This tube support meets the standards for NSF Lead Content Program, has a length of 15/32 inch, a maximum operating pressure of 400 psi and is designed for the following applications: air lines, chemical dispensing, compressors, cooling lines, fluid transfer, industry, lubrication lines, machinery. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a tube insert, with an imperial system of measurement.

This tube support meets the standards for NSF Lead Content Program, has a length of 15/32 inch, a maximum operating pressure of 400 psi and is designed for the following applications: air lines, chemical dispensing, compressors, cooling lines, fluid transfer, industry, lubrication lines, machinery. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a tube insert, with an imperial system of measurement.

This compression series union reducer meets the standards for SAE J512, UL, has a length of 1 23/32 inch, a maximum operating pressure of 1,000 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight reducing connector, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This compression series union reducer meets the standards for SAE J512, UL, has a length of 1 23/32 inch, a maximum operating pressure of 1,000 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight reducing connector, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.